欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(4)
  • 图书()
  • 专利()
  • 新闻()

高匹配焊接接头裂纹的J积分研究

马维甸 , 张式程 , 田锡唐

金属学报

本文研究了含有纵向裂纹或缺陷的高匹配焊接接头材料不均匀性和焊缝宽度对弹塑性断裂表征参量J积分的影响规律.高匹配焊缝被理想化为含有一平行裂纹的一个硬夹层,其屈服应力高于母材.在平面应力条件下利用弹塑性有限元计算得到数值解.研究结果表明,材料不均匀性和焊缝宽度对J积分值有显著影响,特别当名义应力或名义应变较高时影响更大.因此,估算高匹配接头的裂纹推力时必须对此加以考虑.

关键词: 焊接接头 , crack , J-integral

工业纯钛J积分的实验、有限元和EPRI解研究

代巧 , 周昌玉 , 彭剑 , 贺小华

稀有金属材料与工程

通过断裂实验、二维有限元分析(2-D FEA)、三维有限元分析(3-D)以及EPRI解等4种方法获得了工业纯钛(CP Ti)紧凑拉伸试验(CT)的J积分.结果表明,EPRI解获得的J积分与2-D FEA结果吻合,但是它们明显低于实验结果,而3-D FEA获得的J积分更接近于实验值.为了提高J积分的估算精度,提出了基于3-D FEA改进的EPRI解,并用实验结果进行了验证.此外,将由原EPRI解和改进的EPRI解获得的J积分建立的CP Ti失效评定曲线(FAC)与实验结果进行比较,发现EPRI解的改进不仅提高了J积分的估算精度,而且提高了FAC的可靠性.

关键词: J积分 , CP Ti , FEA , EPRI

RELATIONSHIP BETWEEN J-INTEGRAL AND FRACTURE SURFACE AVERAGE PROFILE

Y.G. Cao

金属学报(英文版)

To investigate the causes that led to the formation of cracks in materials, a novel method that only considered the fracture surfaces for determining the fracture toughness parameters of J-integral for plain strain was proposed. The principle of the fracture-surface topography analysis (FRASTA) was used. In FRASTA, the fracture surfaces were scanned by laser microscope and the elevation data was recorded for analysis. The relationship between J-integral and fracture surface average profile for plain strain was deduced. It was also verified that the J-integral determined by the novel method and by the compliance method matches each other well.

关键词: FRASTA , null , null

Study on the Relationship Between J-Integral and COD

Y.G. Cao , X.Y. Sun

金属学报(英文版)

J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.

关键词: FRASTA , null , null

出版年份

刊物分类

相关作者

相关热词