XIA Zhenhai Hebei Institute of Technology
,
Tianjin
,
ChinaMAO Zhiying ZHOU Yaohe Northwestern Polytechnical University
,
Xi'an
,
China Doctor
,
Faculty of Foundry
,
Department of Mechanical Engineering No.2
,
Hebei Institute of Technology
,
Tianjin 300132
,
China
金属学报(英文版)
On the basis of fluid kinetics,a model for infiltration kinetics of liquid metals into fibre pre- fabricated composite has been proposed.The infiltration processing,together with the measurements of infiltrating velocity and permeability,for the C fibre-reinforced Al matrix composites have been studied.The model proposed seems to be in good agreement with the ex- perimental results.Two different infiltration modes,uniform and non-uniform,were found and a new technique was suggested.Thus,the quality composites of C fibre-reinforced Al may be made under low pressure regardless of non-wettability of liquid metal to the fibres.
关键词:
liquid metal
,
null
,
null
XU Bojun GU Nanju YAN Dianran YIN Fuxing Hebei Institute of Technology
,
Tianjin
,
China GU Nanju Division of Heat Treatment
,
Hebei Institute of Technology
,
Tianjin 300132
,
China
金属学报(英文版)
Using a self-made pulse magnetic field heat treatment equipment with low or medium intensi- ty,the tempering process of high speed steel W6Mo5Cr4V2 was investigated.It was found that the secondary hardening process and the transformation of retained austenite for the steel were accelerated by the pulse magnetic field,and the tempering period could be reduced to half of the original.It was shown by the analyses of X-ray and eletron microscopy that the precipitation of carbides becomes more homogeneous and dispersive,and the tetragonality of martensite increases obviousely,which causes the improvement of hardness and red-hardness for the steel.It was confirmed that the service life of tools as centre bits,screw taps and punches for nuts could be increased by 0.4 to 1.4 times by the tempering in magnetic field.
关键词:
pulse magnetic field
,
null
,
null
