H.C. Liao M. Zhang J.J. Bi K. Ding X. Xi S.Q. Wu
材料科学技术（英文）
Eutectic solidification in near-eutectic Al-13 wt pct Si casting alloys and the effect of trace addition of boron or strontium on it have been investigated using thermal analysis and microstructural characterization. In unmodified alloy, dual eutectic structure has been observed. The coarse eutectic (dendrite-like Al+ coarse Si flakes) is formed above the equilibrium temperature of eutectic (Al+Si) reaction (577°C). The coarse eutectic (CE) grains nucleate from the primary silicon particles formed earlier due to local enrichment of silicon solute and grow in a divorced mode between the dendritic Al phase and large silicon flakes. The fine eutectic (FE) grains nucleate later on other potential sites activated by melt undercooling and grow in coupled-growing mode with the silicon crystals as fine flakes. The formation of the FE grains is favored in the alloys containing boron because of a great number of potential nucleation sites being added from boron-containing particles. Addition of strontium to the alloys restrains completely the formation of primary silicon particles and hence limits the nucleation of the CE. This is because the eutectic point has moved far enough to make the alloy, at this composition (Al-13 wt pct Si), hypo-eutectic. Local cooling rate during solidification has an important influence on competition formation of these two eutectics.
关键词:
Al-Si alloy
,
eutectic
,
solidification
,
dual eutectic grains
,
grain refinement
