Sen YANG
,
Yunpeng SU
,
Zhenxia LIU
,
Weidong HUANG
,
Yaohe ZHOU
材料科学技术（英文）
Cellular spacing selection of Cu-27.3 wt pct Mn alloy has been investigated by laser surface rapid resolidification experiments. The experimental results show that there exists a wide distribution range in cellular spacing under ultra-high temperature gradient and rapid solidification conditions and the average spacing decrease with increase of the growth rate. The experimental results are compared with the current KGT model for rapid cellular/dendritic growth, and a reasonable agreement is found.
关键词:
Sen YANG
,
Yunpeng SU
,
Wenjin LIU
,
Weidong HUANG
,
Yaohe ZHOU
材料科学技术（英文）
The detailed laser surface remelting experiments of Cu-31.4 wt pct Mn and Cu-26.6 wt pct Mn alloys on a 5 kW CO2 laser were carried out to study the effects of processing parameters (scanning velocity, output power of laser) on the growth direction of microstructure in the molten pool and cellular spacing selection under the condition of ultra-high temperature gradient and rapid directional solidification. The experimental results show that the growth direction of microstructure is strongly affected by laser processing parameters. The ultra-high temperature gradient directional solidification can be realized on the surface of samples during laser surface remelting by controlling laser processing parameters, the temperature gradient and growth velocity can reach 106 K/m and 24.1 mm/s, respectively, and the solidification microstructure in the center of the molten pool grows along the laser beam scanning direction. There exists a distribution range of cellular spacings under the laser rapid solidification conditions, and the average spacing decreases with increasing of growth rate. The maximum, λmax, minimum, λmin, and average primary spacing, , as functions of growth rate, Vb, can be given by, λmax=12.54 , λmin=4.47 , =9.09 , respectively. The experimental results are compared with the current Hunt-Lu model for rapid cellular/dendritic growth, and a good agreement is found.
关键词:
Laser surface remelting
,
null
,
null
,
null
Guanghui MENG
,
Xin LIN
,
Weidong HUANG
材料科学技术（英文）
Based on the Jackson and Hunt’s analysis, the selection of lamellar spacing in regular eutectics was reexamined at low velocity. The isothermal assumption was released and the effective interface undercooling was determined by the weighted average of the eutectic phases. It is found that the lamellar spacing minimized the effective interface undercooling depends only on the intrinsic characteristics of a given system at a fixed velocity. In addition, the selection of lamellar spacing is related to the relationship between the average interfacial undercoolings of the eutectic phases and the lamellar spacing. The selected lamellar spacing obviously deviated from that predicted by the Jackson and Hunt’s analysis if the variation of the average interfacial undercoolings of the solid phases with the lamellar spacing was markedly different at a constant growth rate.
关键词:
Solidification
,
null
,
null
,
null
