{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"通过硬度测试、扫描电镜、透射电镜研究淬火速率对Al-Zn-Mg-Cu-Cr合金挤压棒材组织及硬度的影响.结果表明:淬火速率低于100℃/s时,硬度开始明显下降;2℃/s淬火时,硬度下降了43%.淬火速率低于100℃/s时,随着淬火速率降低,冷却过程中(亚)晶界及晶内弥散粒子处非均匀形核析出η平衡相的数量和尺寸明显增加,时效强化效果明显降低.相同淬火速率时,晶内η平衡相尺寸大于晶界η平衡相尺寸.在所研究的淬火速率范围内建立起硬度值与η平衡相面积分数间的定量关系.","authors":[{"authorName":"韩素琦","id":"ab334e38-c49b-4ddd-b9fb-3240494c4cf3","originalAuthorName":"韩素琦"},{"authorName":"刘胜胆","id":"b2eefff4-9838-4a78-8e5f-50c95d9c5b99","originalAuthorName":"刘胜胆"},{"authorName":"李承波","id":"52c09fa4-f3f8-400f-984d-7eab7bedc071","originalAuthorName":"李承波"},{"authorName":"雷越","id":"bb7fccf4-bd25-4c39-82d9-26d22c0210a2","originalAuthorName":"雷越"},{"authorName":"邓运来","id":"fc9deaed-e092-41a8-855a-9552215c24dd","originalAuthorName":"邓运来"},{"authorName":"张新明","id":"e77e530d-8bdb-41d9-8f9d-ef722d1f1e35","originalAuthorName":"张新明"}],"doi":"10.11868/j.issn.1001-4381.2015.000502","fpage":"9","id":"90d775ed-c1ef-4341-801a-62c3482b81d2","issue":"4","journal":{"abbrevTitle":"CLGC","coverImgSrc":"journal/img/cover/CLGC.jpg","id":"9","issnPpub":"1001-4381","publisherId":"CLGC","title":"材料工程"},"keywords":[{"id":"48ae3904-3591-491a-9b7c-992a562e01f3","keyword":"Al-Zn-Mg-Cu-Cr合金","originalKeyword":"Al-Zn-Mg-Cu-Cr合金"},{"id":"2d8f81a6-48b2-408b-8865-aea9b5c1b68b","keyword":"淬火速率","originalKeyword":"淬火速率"},{"id":"3b28b1b0-3951-43d6-9326-715830b47c0a","keyword":"微观组织","originalKeyword":"微观组织"},{"id":"af0e4717-9cd5-45f3-bde9-12136eef5f80","keyword":"硬度","originalKeyword":"硬度"}],"language":"zh","publisherId":"clgc201704002","title":"淬火速率对Al-Zn-Mg-Cu-Cr合金挤压棒材组织及硬度的影响","volume":"45","year":"2017"},{"abstractinfo":"采用硬度测试、光学显微镜、X-射线衍射、扫描电镜、透射电镜和扫描透射电镜等手段研究了晶粒组织对Al?Zn?Mg?Cu?Cr合金淬火敏感性的影响。结果表明:淬火速率从960°C/s减小至2°C/s时,均匀化及固溶后合金(H-合金)时效后的硬度下降了约33%,而挤压及固溶后合金(E-合金)时效后的硬度下降了约43%。H-合金中有粗大等轴状晶粒,E-合金中有拉长的变形晶粒及亚晶粒。慢速淬火H-合金硬度下降33%是由含Cr弥散粒子引起的;E-合金中(亚)晶界的数量增加了大约一个数量级,导致慢速淬火试样硬度的下降幅度进一步增加了10%,淬火敏感性更高。","authors":[{"authorName":"李承波","id":"f06e7a8c-53a9-4613-9bdb-108c6fe525ab","originalAuthorName":"李承波"},{"authorName":"韩素琦","id":"6f92c3c5-0066-4a06-be5b-6d17a1cf9f65","originalAuthorName":"韩素琦"},{"authorName":"刘胜胆","id":"36c58b35-cc53-44bc-accf-df5d940ff48e","originalAuthorName":"刘胜胆"},{"authorName":"邓运来","id":"2fb74850-317e-481f-97b4-6428e43bdd05","originalAuthorName":"邓运来"},{"authorName":"张新明","id":"b46a9775-2aa0-47bb-924f-4e07d60e5b19","originalAuthorName":"张新明"}],"doi":"10.1016/S1003-6326(16)64319-4","fpage":"2276","id":"0224723b-54ce-46be-a128-dede529aa217","issue":"9","journal":{"abbrevTitle":"ZGYSJSXBEN","coverImgSrc":"journal/img/cover/ZGYSJSXBEN.jpg","id":"757390d2-7d95-4517-96f1-e467ce1bff63","issnPpub":"1003-6326","publisherId":"ZGYSJSXBEN","title":"中国有色金属学报(英文版)"},"keywords":[{"id":"bbdff05f-7201-4fb8-8204-c0873db210fe","keyword":"晶粒组织","originalKeyword":"晶粒组织"},{"id":"3b3c1421-c22b-44aa-bdd1-bce816d20905","keyword":"Al-Zn-Mg-Cu-Cr合金","originalKeyword":"Al-Zn-Mg-Cu-Cr合金"},{"id":"967c5c22-7cc1-43af-8c46-6eb70ce6362d","keyword":"弥散粒子","originalKeyword":"弥散粒子"},{"id":"dd854b92-5bfd-4477-aef2-288f15551b5c","keyword":"淬火敏感性","originalKeyword":"淬火敏感性"}],"language":"zh","publisherId":"zgysjsxb-e201609002","title":"晶粒组织对Al-Zn-Mg-Cu-Cr合金淬火敏感性的影响","volume":"26","year":"2016"},{"abstractinfo":"The hot deformation behaviors and microstructures of Al-Zn-Mg-Cu-Cr aluminum alloy during hot deformation have been studied using thermal stimulation test, optical microscopy and transmission electron microscopy. As a result, the true stress vs. true strain cures and the microstructures of various deformation conditions are obtained; the microstructures gradually incline to dynamic-recrystallization with the deformation temperature rising and the recrystallization grains refine with the decrease of deformation temperature or with raising the strain rates; the quantitative relationship between the Zener-Hollomon parameter (Z) and average recrystallization grain size in the subsequent heat treatment is set up.","authors":[{"authorName":"G.Y. Lin","id":"764ab034-340a-4180-880a-88730aa2842c","originalAuthorName":"G.Y. Lin"},{"authorName":" Z.F. Zhang","id":"deb69376-c0b0-43f4-90e9-d86447e50d5c","originalAuthorName":" Z.F. Zhang"},{"authorName":" H. Zhang","id":"15533c34-2dc0-4fee-91b8-79abaa267033","originalAuthorName":" H. Zhang"},{"authorName":"null","id":"7c385017-ef2f-4265-a59e-dc69145cbb3d","originalAuthorName":"null"},{"authorName":"null","id":"cfaa3d97-3343-4528-9ddb-146e9b1a6de1","originalAuthorName":"null"}],"categoryName":"|","doi":"","fpage":"109","id":"af53924c-d13a-432b-bce4-4c5d393a7b5f","issue":"2","journal":{"abbrevTitle":"JSXBYWB","coverImgSrc":"journal/img/cover/amse.jpg","id":"49","issnPpub":"1006-7191","publisherId":"JSXBYWB","title":"金属学报(英文版)"},"keywords":[{"id":"c9646e16-560e-4447-97f8-d0921b61aa6b","keyword":"Al-Zn-Mg-Cu-Cr aluminum alloy","originalKeyword":"Al-Zn-Mg-Cu-Cr aluminum alloy"},{"id":"a25fb09a-67ea-4f51-a6ae-93a7383f8c94","keyword":"aluminum","originalKeyword":"aluminum"},{"id":"349d3717-239b-4ff9-8e34-49c23d4c91e5","keyword":"alloy","originalKeyword":"alloy"},{"id":"9c281ee7-e0ca-4992-85cf-b8cff7ee6136","keyword":"Hot","originalKeyword":"Hot"},{"id":"73f07555-6119-4930-9966-72265066f026","keyword":"deform","originalKeyword":"deform"}],"language":"en","publisherId":"1006-7191_2008_2_2","title":"Study on the Hot Deformation Dehaviors of Al-Zn-Mg-Cu-Cr Aluminum Alloy","volume":"21","year":"2008"},{"abstractinfo":"The mechanical behavior and microstructures of an Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot deformation were investigated by thermal stimulation test, optical microscopy, and transmission electron microscopy. The true stress vs true strain curves and the microstructure evolution of two hot deformation procedures were gained. The flow stress of the alloy studied decreases with increasing the deforming passes and declining the temperature, and the larger the temperature decline between adjacent stages, the larger the peak stress fall is. The stress-strain behavior mainly result from the dynamic recovery during deformation, the static recovery and re-crystallization in the delay time, and the second phases precipitated from the matrix at high temperature.","authors":[{"authorName":"Gaoyong LIN","id":"c46cf7af-b07f-42f1-b796-8a2c2170a82d","originalAuthorName":"Gaoyong LIN"},{"authorName":"Xiaoyan ZHENG","id":"464d093b-2fb6-4d82-9faa-3953c76c59cd","originalAuthorName":"Xiaoyan ZHENG"},{"authorName":"Wei YANG","id":"c8668f90-f4af-4fe6-b00a-c5db77260c55","originalAuthorName":"Wei YANG"},{"authorName":"Di FENG","id":"9555f5b7-f7cc-46dd-93fc-17bd6080f074","originalAuthorName":"Di FENG"},{"authorName":"Dashu PENG","id":"a0828abf-a6fe-4f79-afc0-f12fee99c2a1","originalAuthorName":"Dashu PENG"}],"categoryName":"|","doi":"10.1016/S1006-7191(08)60077-0","fpage":"110","id":"c6602bf2-e390-47e7-8258-e6905ea82ab8","issue":"2","journal":{"abbrevTitle":"JSXBYWB","coverImgSrc":"journal/img/cover/amse.jpg","id":"49","issnPpub":"1006-7191","publisherId":"JSXBYWB","title":"金属学报(英文版)"},"keywords":[{"id":"f896b1e4-aa0a-4797-8f34-ce04100ab911","keyword":"Al-Zn-Mg-Cu-Cr alloy","originalKeyword":"Al-Zn-Mg-Cu-Cr alloy"},{"id":"034579da-5bd3-4eb2-9a1a-4af14754a200","keyword":"null","originalKeyword":"null"},{"id":"e4bbbb0f-24f0-4e9b-bd93-15d7cae29038","keyword":"null","originalKeyword":"null"},{"id":"d1e85bda-3b3b-44aa-b006-68e0c8ff1a2c","keyword":"null","originalKeyword":"null"}],"language":"en","publisherId":"1006-7191_2009_2_10","title":"Study on the hot deformation behavior of Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot compression","volume":"22","year":"2009"},{"abstractinfo":"研究复合添加稀土元素Yb和过渡元素Zr,Cr对Al-Zn-Mg-Cu超高强合金组织、强韧性和局部腐蚀(晶间腐蚀和剥落腐蚀)性能的影响.结果表明:单独添加Zr和复合添加Cr,Yb的合金均发生了再结晶现象,合金的强度、韧性和腐蚀抗力均较低.而在Al-Zn-Mg-Cu合金中复合添加Zr,Yb,Cr形成大量10 ~ 20 nm、共格的固溶部分Zn,Mg,Cu的(Al,Cr)3 (Zr,Yb)弥散相,这些均匀分布于基体的细小共格弥散相能强烈钉扎位错和亚晶界,抑制基体再结晶,使合金亚晶界上的析出相与晶内近似,晶界无沉淀析出带(PFZs,precipitate-free zones)不明显.复合添加Zr,Yb,Cr的Al-Zn-Mg-Cu合金在保持高强度和塑性的同时,沿晶断裂抗力和局部腐蚀抗力显著提高.T6态Al-Zn-Mg-Cu-Zr-Yb-Cr合金的断裂机制主要为韧窝型断裂,剥落腐蚀等级降至EA.再结晶晶界成为超高强Al-Zn-Mg-Cu合金腐蚀和断裂的优先扩展路径.","authors":[{"authorName":"方华婵","id":"aad16643-9d0f-4246-87e5-7b41d929f48e","originalAuthorName":"方华婵"},{"authorName":"巢宏","id":"07f33334-509b-469c-bb7f-1c561bbf7787","originalAuthorName":"巢宏"},{"authorName":"陈康华","id":"cade5c59-2504-4764-8c38-f1ae4624acef","originalAuthorName":"陈康华"},{"authorName":"张茁","id":"f2d0ae8b-6fe4-422b-a3ea-cb703096a053","originalAuthorName":"张茁"}],"doi":"10.13373/j.cnki.cjrm.2015.08.003","fpage":"686","id":"ae58b7be-4c71-4b94-bebc-603711d01462","issue":"8","journal":{"abbrevTitle":"XYJS","coverImgSrc":"journal/img/cover/XYJS.jpg","id":"67","issnPpub":"0258-7076","publisherId":"XYJS","title":"稀有金属"},"keywords":[{"id":"63c87cfe-2e38-43d5-8ed2-1d606dd1c477","keyword":"稀土Yb","originalKeyword":"稀土Yb"},{"id":"166373dd-72b4-4b24-8127-f5b2531b064e","keyword":"过渡元素","originalKeyword":"过渡元素"},{"id":"946061f8-2a8b-48a8-85ab-99ba7ac7acac","keyword":"弥散相","originalKeyword":"弥散相"},{"id":"0e7243dd-287b-4fed-8b19-4ea3bd89975e","keyword":"再结晶","originalKeyword":"再结晶"},{"id":"b6c0ee7f-91f9-4967-ac36-c05dff308332","keyword":"局部腐蚀","originalKeyword":"局部腐蚀"}],"language":"zh","publisherId":"xyjs201508003","title":"Zr,Yb,Cr对Al-Zn-Mg-Cu合金组织、断裂和局部腐蚀行为的影响","volume":"39","year":"2015"},{"abstractinfo":"在Gleeble-1500热模拟试验机上对Al-6.1Zn-2.8Mg-1.9Cu-0.25Cr铝合金进行高温等温压缩实验,研究该合金在变形温度为300 ~ 500℃、应变速率为0.01~1 s-1条件下的流变行为,建立合金高温变形的本构方程,采用TEM分析变形过程中合金的组织特征.结果表明:合金变形抗力随变形温度的升高而下降,随应变速率升高而增大.在360 ~400℃范围内变形时,合金组织仅发生动态回复,当变形温度高于400℃以后,合金热变形以动态再结晶为主.应变速率在0.01~1 s-1范围内,不影响合金的变形软化机制,但对合金亚结构的影响较大,随应变速率的增加,位错密度增加,亚晶尺寸减少.此合金适宜的变形条件为变形温度380 ~400℃、应变速率0.1 s-1.","authors":[{"authorName":"夏卿坤","id":"aa3e04d9-ccf3-4b2f-a166-c3a6a2bc6877","originalAuthorName":"夏卿坤"},{"authorName":"刘志义","id":"66169b62-7553-4231-91f2-8e767df53d4a","originalAuthorName":"刘志义"},{"authorName":"林亮华","id":"79cb6ee9-9612-4da2-8ef8-05826b80696f","originalAuthorName":"林亮华"},{"authorName":"刘煜","id":"06f8cb46-79db-42b1-a549-c4c5f43521f2","originalAuthorName":"刘煜"},{"authorName":"许晓嫦","id":"308485b5-0363-46a4-ba06-0a3e7bba0cbb","originalAuthorName":"许晓嫦"},{"authorName":"陈旭","id":"c914f65b-288b-412b-916d-d3032831c3b7","originalAuthorName":"陈旭"}],"doi":"","fpage":"108","id":"5218d810-6971-43b3-ab00-d3e287501dda","issue":"2","journal":{"abbrevTitle":"CLRCLXB","coverImgSrc":"journal/img/cover/CLRCLXB.jpg","id":"15","issnPpub":"1009-6264","publisherId":"CLRCLXB","title":"材料热处理学报"},"keywords":[{"id":"896de1c8-72bb-40d8-83df-c6af00943387","keyword":"Al-6.1Zn-2.8Mg-1.9Cu-0.25Cr合金","originalKeyword":"Al-6.1Zn-2.8Mg-1.9Cu-0.25Cr合金"},{"id":"7c6f5d33-2e29-480f-aaa5-4fecf7f1cb2c","keyword":"热压缩变形","originalKeyword":"热压缩变形"},{"id":"f4043bfe-5059-47a2-9dcf-35018c7c32b1","keyword":"本构关系","originalKeyword":"本构关系"}],"language":"zh","publisherId":"jsrclxb201302022","title":"Al-6.1Zn-2.8Mg-1.9Cu-0.25Cr合金的热压缩变形行为","volume":"34","year":"2013"},{"abstractinfo":"研究复合添加微量Cr、Yb、Zr对Al-Zn-Mg-Cu合金的显微组织和断裂特征的影响,分析其对合金韧化的作用机制.结果表明:在Al-Zn-Mg-Cu合金中复合添加Cr、Yb、Zr形成了含Cr、Yb、Zr的球形弥散相,这些均匀分布于基体上的弥散相能强烈钉扎位错和亚晶界,使基体保持形变回复组织,保持小角度晶界,抑制基体再结晶;T6态断裂机制主要为韧窝型穿晶断裂,与仅添加Zr相比,沿晶断裂抗力显著提高;晶界的无沉淀区(PFZs)较宽,且析出相在晶界呈明显不连续分布.","authors":[{"authorName":"方华婵","id":"b1ae414d-788c-45c1-9245-c05901acc2df","originalAuthorName":"方华婵"},{"authorName":"陈康华","id":"290cbcff-32d6-4a3f-89a9-2ff404a75335","originalAuthorName":"陈康华"},{"authorName":"张茁","id":"ec499f4a-ccf3-48aa-a734-4f450fa7932d","originalAuthorName":"张茁"},{"authorName":"刘刚","id":"61576fe4-6204-443d-9459-2cdda01a844f","originalAuthorName":"刘刚"}],"doi":"","fpage":"1960","id":"6bdf3106-1c98-49f7-b419-0cc5356a9103","issue":"11","journal":{"abbrevTitle":"XYJSCLYGC","coverImgSrc":"journal/img/cover/XYJSCLYGC.jpg","id":"69","issnPpub":"1002-185X","publisherId":"XYJSCLYGC","title":"稀有金属材料与工程"},"keywords":[{"id":"abe7447a-b1e3-4958-8bab-ea6cb13ed953","keyword":"Al-Zn-Mg-Cu合金","originalKeyword":"Al-Zn-Mg-Cu合金"},{"id":"33e01102-61b5-4c09-a673-add8f190bf8f","keyword":"Yb","originalKeyword":"Yb"},{"id":"1087d1e3-a65a-4818-b8e1-40ad46cf27d9","keyword":"再结晶","originalKeyword":"再结晶"},{"id":"08acc99d-7f26-401d-a6df-ad0049968069","keyword":"断裂特征","originalKeyword":"断裂特征"},{"id":"4ca3384b-54d9-4ac3-92e2-f2b7704caa2f","keyword":"穿晶断裂","originalKeyword":"穿晶断裂"}],"language":"zh","publisherId":"xyjsclygc200911017","title":"Cr、Yb合金化对Al-Zn-Mg-Cu-Zr合金组织和断裂特征的影响","volume":"38","year":"2009"},{"abstractinfo":"研究了Cr20Ni80耐热合金在Al-7%Si合金中的恒温腐蚀和在Al-Cu-Mg-Zn合金中的热循环腐蚀,分别绘制了两种实验条件下的腐蚀动力学曲线.通过金相显微分析、电子探针微区线扫描和点扫描、X射线衍射等手段分析了反应界面的微观组织、元素浓度变化、相组成等.结果表明,Cr20Ni80合金在700℃的Al-7%Si合金中的腐蚀速率是0.167mm/h;在Al-Cu-Mg-Zn合金中热循环条件下的腐蚀速率较低,且反应生成的界面层并不能明显降低后续腐蚀速率;界面反应过渡层由NiAl和Ni_2 Al_3两相组成.Al-Si-Cu-Mg-Zn合金相变储热材料的腐蚀性主要取决于铝元素含量.镍基合金不宜用作Al-Si-Cu-Mg-Zn合金的容器材料.","authors":[{"authorName":"程晓敏","id":"656f6f88-ec58-4edf-bb69-1caaf1a4d4fd","originalAuthorName":"程晓敏"},{"authorName":"谭永刚","id":"5c485d67-9955-4fae-84c9-4f1e9c8264ae","originalAuthorName":"谭永刚"},{"authorName":"吴兴文","id":"3e709dbe-0380-443c-8373-795740212e27","originalAuthorName":"吴兴文"}],"doi":"","fpage":"134","id":"9a1b4879-41b0-432b-b4e5-4298b74ff7ea","issue":"11","journal":{"abbrevTitle":"CLRCLXB","coverImgSrc":"journal/img/cover/CLRCLXB.jpg","id":"15","issnPpub":"1009-6264","publisherId":"CLRCLXB","title":"材料热处理学报"},"keywords":[{"id":"b3be858e-e0f6-409f-a62e-9f9c51f108bc","keyword":"相变","originalKeyword":"相变"},{"id":"b792d87d-8cdc-49d2-b936-56dfc7870082","keyword":"储热材料","originalKeyword":"储热材料"},{"id":"1b5ed1f2-896a-42d4-a0e6-489374838592","keyword":"腐蚀","originalKeyword":"腐蚀"},{"id":"79d14b3b-4923-4269-97f6-0756319105d1","keyword":"腐蚀动力学","originalKeyword":"腐蚀动力学"}],"language":"zh","publisherId":"jsrclxb201011026","title":"Cr20 Ni80合金在液态Al-Si合金及Al-Si-Cu-Mg-Zn合金中界面腐蚀研究","volume":"31","year":"2010"},{"abstractinfo":"针对Al-Zn-Mg-Cu-Li合金时效早期出现的硬度快速上升现象,用L-J势函数计算了该合金各种原子间、原子与空位间的相互作用势.结果表明:在Al-Zn-Mg-Cu合金中,以Mg/v聚集为主,还有Zn/v,Cu/v,Zn/Mg的复合聚集;加入较高量的Li以后,则以Li/v聚集为主,几乎没有Zn/Mg聚集形式.","authors":[{"authorName":"魏芳","id":"e92f848e-8c7f-49d1-859c-6b3ca619be12","originalAuthorName":"魏芳"},{"authorName":"白朴存","id":"34772253-4b9c-445c-b903-dc8afa0dc384","originalAuthorName":"白朴存"},{"authorName":"周铁涛","id":"d8e4ca3c-f82c-4006-bdb1-7f58da74d830","originalAuthorName":"周铁涛"},{"authorName":"刘培英","id":"2730a8b5-6667-4b22-a3f6-d8432b310711","originalAuthorName":"刘培英"},{"authorName":"张永刚","id":"2f21e625-0cbb-44e5-996a-62ea53b7b00f","originalAuthorName":"张永刚"},{"authorName":"陈昌麒","id":"0386ebf7-d4dc-4ad6-9a64-3872e053a13d","originalAuthorName":"陈昌麒"}],"doi":"10.3969/j.issn.1005-5053.2004.01.006","fpage":"28","id":"de4598f4-0731-4edb-ab6a-e580269851b5","issue":"1","journal":{"abbrevTitle":"HKCLXB","coverImgSrc":"journal/img/cover/HKCLXB.jpg","id":"41","issnPpub":"1005-5053","publisherId":"HKCLXB","title":"航空材料学报"},"keywords":[{"id":"d497dbb2-d145-4f75-bce2-adc204004aac","keyword":"Al-Zn-Mg-Cu-Li合金","originalKeyword":"Al-Zn-Mg-Cu-Li合金"},{"id":"33a884f5-16a8-4ac3-93ca-76f5b063c54a","keyword":"时效早期","originalKeyword":"时效早期"},{"id":"cdfafb11-45f3-47b9-97eb-034a3823f664","keyword":"相互作用势","originalKeyword":"相互作用势"}],"language":"zh","publisherId":"hkclxb200401006","title":"Li对Al-Zn-Mg-Cu系合金时效早期原子聚集行为的影响","volume":"24","year":"2004"},{"abstractinfo":"用透射电镜对Zn-Al-Cu-Mg合金的氧乙焰气焊焊接接头的组织及其形态进行了研究分析,结果表明,熔合区靠近母材的β-Zn和α-Al大多呈颗粒状,焊缝中的β-Zn和α-Al呈条状和颗粒状,α-Al颗粒内存在大量的位错和位错环;在β-Zn与α-Al颗粒内和晶界上主要存在Al4Cu9、β'-CuZn、Al7Cu 3Mg6及CuTi2等.Al4Cu9与β-Zn存在一定的晶格取向关系,[211]A14Cu9∥[212]β-zn,即(011)A14Cu9∥(101)β-zn,(111)A14Cu9∥(120)β-zn.","authors":[{"authorName":"刘秀忠","id":"f0df5a30-9e07-437a-ae53-e656d7a73374","originalAuthorName":"刘秀忠"},{"authorName":"邹增大","id":"f65b3406-638e-41a6-9ab0-14b193f9ce74","originalAuthorName":"邹增大"},{"authorName":"杨德新","id":"ffba3b7c-e299-4ac1-8751-b48f92e59ab2","originalAuthorName":"杨德新"}],"doi":"","fpage":"364","id":"66bd5ec4-8c20-4bff-8ea3-8f0d6a864edc","issue":"z2","journal":{"abbrevTitle":"CLDB","coverImgSrc":"journal/img/cover/CLDB.jpg","id":"8","issnPpub":"1005-023X","publisherId":"CLDB","title":"材料导报"},"keywords":[{"id":"6d2f6fc3-45d1-4cec-9ece-66b2c7c9c01c","keyword":"氧乙炔气焊","originalKeyword":"氧乙炔气焊"},{"id":"19fa1041-627b-430d-9e36-8178fe3cb2ce","keyword":"焊接接头","originalKeyword":"焊接接头"},{"id":"ecef0e2f-03f7-40cb-85c6-2ffc27e21b11","keyword":"透射电镜","originalKeyword":"透射电镜"}],"language":"zh","publisherId":"cldb2004z2112","title":"Zn-Al-Cu-Mg合金气焊接头显微组织的分析研究","volume":"18","year":"2004"}],"totalpage":7071,"totalrecord":70708}