Zhuang Li Di Wu
材料科学技术（英文）
The machinability tests were conducted by using a YD-21 dynamometer on a CA6161A lathe. The experiments were conducted to determine the effect of free-cutting additives on machining characteristics of austenitic stainless steels. The conventional austenitic stainless steel 1Cr18Ni9Ti (steel A) and the free cutting austenitic stainless steel (steel B) were prepared. The results have shown that machinable inclusions were composed of MnS and CuO, and they might be also Ti4C2S2. The presence of Bi in the inclusion was detected by the atom map and electro-probe microanalysis (EPMA), which might be one of the most important factors to improve the machinability of austenitic stainless steels. The cutting forces for steel B were lower than those of steel A at various cutting speeds; the abrasion depth of theflank of the tool for steel B was less than that of the steel A under the same cutting conditions. The machinability of austenitic stainless steel was visibly improved by adding free-cutting additives, such as S, Cu and Bi. Ultimate tensile, yield strength, and total elongation values of the free cutting austenitic stainless steel were improved due to the addition of these free-cutting additives.
关键词:
Austenitic stainless steel
,
free-cutting additives
,
bismuth
,
machining characteristics
,
the mechanical properties.
Zhuang Li Di Wu
材料科学技术（英文）
The machinability tests were conducted by using a YD-21 dynamometer on a CA6161A lathe. The experiments were conducted to determine the effect of free-cutting additives on machining characteristics of austenitic stainless steels. The conventional austenitic stainless steel 1Cr18Ni9Ti (steel A) and the free cutting austenitic stainless steel (steel B) were prepared. The results have shown that machinable inclusions were composed of MnS and CuO, and they might be also Ti4C2S2. The presence of Bi in the inclusion was detected by the atom map and electro-probe microanalysis (EPMA), which might be one of the most important factors to improve the machinability of austenitic stainless steels. The cutting forces for steel B were lower than those of steel A at various cutting speeds; the abrasion depth of theflank of the tool for steel B was less than that of the steel A under the same cutting conditions. The machinability of austenitic stainless steel was visibly improved by adding free-cutting additives, such as S, Cu and Bi. Ultimate tensile, yield strength, and total elongation values of the free cutting austenitic stainless steel were improved due to the addition of these free-cutting additives.
关键词:
Austenitic stainless steel
,
free-cutting additives
,
bismuth
,
machining characteristics
,
the mechanical properties.
李铂
,
周建江
,
夏伟杰
,
吴连慧
液晶与显示
doi:10.3788/YJYXS20142904.0605
直线是机载座舱显示画面中最基本的图元,其显示质量对于整个画面的显示效果影响较大,尤其是小角度下直线显示的“麻花”现象一直是影响显示效果的关键问题之一.为了提高小角度下直线的显示效果,本文提出了一种基于Wu算法的亮度渐变改进算法.该算法通过渐进地展现直线从轴方向上的亮度变化过程,减少亮度畸变,有效地改进了显示效果.通过Matlab仿真和FPGA实现,验证了该算法反走样后的小角度直线显示效果明显优于其他算法,而且结合中点画线法后,绘制时间与Wu算法相当.同时该算法还可改善大角度直线和圆弧的显示效果,消除了大角度直线的边缘锯齿,解决了圆弧在小角度部分的虚化问题.因此本文算法可用于对实时性和显示效果要求高的机载座舱显示系统,以缓解飞行员的视觉疲劳.
关键词:
座舱显示
,
反走样
,
改进Wu算法
,
小角度
,
FPGA实现
吴连慧
,
周建江
,
夏伟杰
,
陈雅雯
液晶与显示
doi:10.3788/YJYXS20153001.0163
对于光栅化的三角形,其边缘存在明显的锯齿现象,因此需要进行反走样处理.基于Wu直线反走样算法的思想,考虑了水平直线外侧直接添加插值点的算法和三角形三边外侧反走样的算法.综合两者的优点,在绘制光栅化的三角形的同时,边缘叠加Wu反走样直线,并考虑背景像素灰度值的作用.结果表明,改进的三角形光栅化的边缘反走样算法有效提高了三角形光栅化后边缘的显示效果,该算法计算量小,便于FPGA实现,可用于对图形显示质量要求很高的机载显示系统.
关键词:
反走样
,
Wu算法
,
光栅化
,
FPGA
Journal of Materials Research
Deformation-induced gamma -> DI-alpha(2) phase transformation was verified to occur in the twin-intersection region of a Ti-45Al-8Nb (at.%) alloy compressed at room temperature. High-resolution image observations of the deformation-induced DI-alpha(2) phase suggested that the orientation relationship between the DI-alpha(2) and gamma phases remained the typical one: (0001)(DI-alpha 2)//{111}(gamma), [11 (2) over bar0](DI-alpha 2)//< 101]gamma. The conversion of stacking sequence from ordered face-centered tetragonal to ordered nonequilibrium hexagonal close-packed structure was accomplished by the movement of a/6 < 11 (2) over bar] Shockley partial dislocations on every other {111}(gamma) plane. Compositional analysis based on energy dispersive spectra revealed that the DI-alpha(2) phase had the same composition as the matrix gamma phase. No compositional diffusion Occurred because the plastic deformation was carried out at room temperature. The strong stress concentration in the intersection region was the major force to induce the gamma -> DI-alpha(2) phase transformation in the process of room-temperature compression.
关键词:
titanium aluminides;mechanical-properties;room-temperature;microstructure;intermetallics;microscopy;nb
徐江华
,
李山青
上海金属
DI材是宝钢的重要产品,主要用于碳酸饮料罐和啤酒罐.DI材沿宽度方向的厚度均匀性要求十分严格.为了减少DI材的横向厚差,开发了横向厚差自动控制系统并应用在某冷连轧机上.该控制系统使用了基于鲁棒性能指标(robustness specification)的横向厚差自动控制算法,从而使厚度0.229 mm以下的DI材的横向厚差被控制在±4μm以内.
关键词:
DI材
,
冷轧
,
横向厚差
,
自动控制
Hu Wang Juan Xie Kangping Yan Ming Duan
材料科学技术（英文）
Different morphologies of zinc oxide (ZnO), including microrods, hexagonal pyramid-like rods and flower-like rod aggregates, had been synthesized, respectively, on glass substrates by controlling the reaction conditions (such as precursor concentration, reaction time and pH value) of hydrothermal method. The morphologies of the as-obtained ZnO were observed with scanning electron microscopy and transmission electron microscopy.
Also, the crystalline natures of di®erent ZnO crystals were analyzed with X-ray diffraction. The possible growth mechanism of ZnO crystals with di®erent morphologies was discussed.
关键词:
Zinc oxide
胡跃鑫
,
冯玉林
,
姜伟
应用化学
doi:10.3724/SP.J.1095.2011.00521
采用不同尺寸的碳酸钙粒子增韧高密度聚乙烯,研究了不同温度下共混体系的临界粒子间距与碳酸钙粒子尺寸和含量之间的关系,确定了温度是Wu氏增韧理论临界粒子间判据适用性的重要影响因素.结果表明,在17℃下,临界粒子间距与碳酸钙粒子的尺寸和含量无关,该条件下Wu氏增韧理论临界粒子间距判据是适用的;而随着温度的升高,发现临界粒子间距依赖于碳酸钙粒子的尺寸,表明高温条件下,Wu氏增韧理论临界粒子间距判据不再适用.
关键词:
聚合物增韧
,
粒子间距
,
脆韧转变
Y.B. Hou
金属学报(英文版)
In this paper, the PMMA films doped with N,N'-diphenyl-N,N'-di(m-tolyl)-benzidineand rubrene were fabricated by spin coating, and the effect of photooxidation onthe photoluminescence of the doped PMMA thin films was investigated. The resultsshowed that under the irradiation of 350nm UV light, N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine can sensitized rubrene and results in the enhancement in the photooxrationof rubrene. The effect of photooxidation on the photoluminescence from rubrene w asmore obvious. Both lifetime measurement and in situ measurement of photolumines-cence showed that rubrene molecules exist in two chemical surroundings.
关键词:
photoluminescence
,
null
