WANG Xiao
,
WANG Zuo-cheng
,
WANG Xie-bin
,
WANG Yi-ran
,
GAO Jun-qing
,
ZHAO Xiu-ling
钢铁研究学报(英文版)
Microstructures and critical phase-transformation temperature of boron-nickel added Nb-treated high strength low alloy (HSLA) H-beams cooled at different cooling rate, with different deformation were investigated. Continuous cooling transformation (CCT) diagram of this new type of steel was obtained by using Gleeble 1500 thermomechanical simulator. Microstructures and hardness, especially micro-hardness of the experimental steel were investigated by optical microscopy (OM), scanning electron microscope (SEM), Rockwell and Vickers hardness tests. Phase analysis was also studied by X-ray diffraction (XRD). The results indicated that with increase of cooling rate, microstructures of continuous cooled specimens gradually transformed from polygonal ferrite and pearlite, grain boundary ferrite and bainite, bainite and martensite to single martensite. The CCT diagram revealed that slow cooling was needed to avoid austenite-bainite transformation to ensure toughness of this steel. By plastic deformation of 40%, austenite-ferrite transformation temperature increased by 46 ℃, due to deformation induced ferrite transformation during continuous cooling, but Rockwell hardness has little change.
关键词:
thermomechanical simulation
,
HSLA H-beam
,
microstructure
,
CCT diagram
MAO Weimin University of Science and Technology
,
Beijing
,
100083
,
China.
材料科学技术（英文）
The recrystallization texture in commercially pure Al is investigated after the samples are rolled differently and annealed.The samples with low rol- ling reductions could be generally recovered or recrystallized in situ and characterized by the re- tained G{110}<001>component.This recovery process decreases during annealing with the increase of reduction.The appearance of the B/R{359}. <132>and R{123}<634>components de- pending on the rolling reduction is investigated and the less developed Cube{100}<001>component in commercially pure ahninium is also discussed.
关键词:
recrystallization
,
null
,
null
,
null
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
Europhysics Letters
Noncollinear magnetic investigations of the ground state in PrFeAsO have been performed by the density-functional theory. We calculated the total energy and made structure optimization, and the electronic density of states of PrFeAsO was analyzed. There are three different magnetic structures in PrFeAsO defined by experiments. Based on these magnetic structures, we studied four collinear and four noncollinear cases. The ground state is found to take the ordering proposed by Zhao, in which the FeAs plane is of stripe antiferromagnetism and Pr spins are perpendicular to Fe spins. The electronic density of states indicates that for PrFeAsO the increase of the electron Coulomb interaction leads to a decrease in conductivity. Copyright (C) EPLA, 2011
关键词:
high-temperature superconductivity;phase-diagram;oxypnictides;instability
Ruwei GAO
,
Wei CHEN
,
Jiancheng ZHANG
,
Weicun FONG
,
Wei LI
,
Xiumei LI
材料科学技术（英文）
For both sintered and nanocomposite NdFeB magnets, deltaM(H) of the Henkel plot increases from zero, and reaches a peak, then decreases and changes to the negative values with increasing applied field. This shows that the intergrain interaction changes from the exchange-coup ling type into the magnetostatic interaction type. The magnetic field corresponding to the peak of deltaM(H) is slightly smaller than the coercivity of magnet. The peak of deltaM(H) for aligned sintered magnet is greater than that for misaligned magnet. deltaM(H) peak of the nanocomposite NdFeB magnets increases with decreasing grain sizes. It indicates that the effect of alignment field on the properties of magnet is similar to that of exchange-coupling interaction.
关键词:
TAO Zengyi LUO Jiaming Huazhong University of Science and Technology
,
Wuhan
,
China TAO Zengyi
,
Faculty of Metallic Materials
,
Dept.of Mechanical Engineering No.2
,
Huazhong University of Science and Technology
,
Wuhan 430074
,
China
金属学报(英文版)
The influence of laser surface melting and induction hardening on the surface structure,con- tact fatigue life and failure behaviour of the nodular cast iron has been investigated.The con- tact fatigue life can be improved by both laser treatment and induction hardening,but the fail- ure process and type are different from each other.The former is due to lumpy and deep spal- ling caused by crack propagation between the quenching zone and the substrate,and the latter is due to nubby and surface flaking caused by the oil wedged action into surface cracks.
关键词:
surface hardening
,
null
,
null
,
null
刘云川
,
李志华
,
李爱明
材料导报
在EB-PVD/(NiPt)Al涂层中存在皱曲(Rumpling)现象 ,导致涂层的早期失效.综述了皱曲(Rump-ling)力学模型的研究进展,主要包括3个方面的问题:皱曲的力学模型、数值计算方法研究现状;皱曲的机理及力学模型研究中存在的问题和不足;进一步研究皱曲机理并改进模型的途径.提出了在粘结层晶体尺度内棘轮效应与热扩散间存在耦合作用的设想,并认为这种耦合作用是形成皱曲的根本原因.
关键词:
热障涂层
,
皱曲
,
力学模型
,
棘轮效应
,
循环塑性
LIU Shan LU Deyang HUANG Tao ZHOU Yaohe National Lab of Solidification Processing
,
Northwestern Polytechnical University
,
Xi'an
,
China LIU Shan
,
lecturer
,
National Laboratory of Solidification Processing
,
Northwestern Polytechnical University
,
Xi'an 710072
,
China
金属学报(英文版)
An experimental apparatus,which has a convection generator and an aid-heater,is developed for the study of the effect of stable laminar liquid flow on the directional solidification process by the use of transparent alloy SCN-2wt-% Ace.The flow is perpendicular to primary arms. By in-situ observation and photographing at different specific moments,it has been found that such a flow can cause a great change in primary spacings of constrained columnar crystals:for cells,the spacings become smaller;but for dendrites,they become larger.The former is mainly due to the tilted growth of upstreamside branches,while the latter is mainly due to the coup- ling effect of liquid flow with solutal field around dendrite tips.The faster the liquid flows,the further smaller the cell spacing and the further larger the dendrite spacing.
关键词:
forced liquid flow
,
null
,
null
,
null
刘建国
,
安振涛
,
张倩
,
杜仕国
,
姚凯
,
王金
材料导报
doi:10.11896/j.issn.1005-023X.2017.04.030
为评估氧化剂硝酸羟胺的热稳定性,使用标准液体铝皿于3 K/min、4 K/min、5 K/min加热速率下进行热分析.借助非等温DSC曲线的参数值,应用Kissinger法和Ozawa法求得热分解反应的表观活化能和指前因子,根据Zhang-Hu-Xie-Li公式、Hu-Yang-Liang-Xie公式、Hu-Zhao-Gao公式以及Zhao-Hu-Gao公式,计算硝酸羟胺的自加速分解温度和热爆炸临界温度,并对热分解机理函数进行了研究.设计了7条热分解反应路径,采用密度泛函理论B3LYP/6-311++G(d,p)方法对硝酸羟胺的热分解进行了动力学和热力学计算.计算结果表明,硝酸羟胺热分解的自加速分解温度TsADT=370.05 K,热爆炸临界温度Te0=388.68K,Tbp0=397.54 K,热分解最可几机理函数的微分形式为f(a) =17×(1-α)18/17.硝酸羟胺热分解各路径中,动力学优先支持路径Path 6、Path 5、Path 4和Path 1生成NO和NO2,其次是Path 2、Path 7和Path 3生成N2和N2O.温度在373 K以下时,Path 1'反应无法自发进行,硝酸羟胺无法进行自发的热分解.从热力学的角度来看,硝酸羟胺在370.05K以下储存是安全的.
关键词:
硝酸羟胺
,
热分析
,
热稳定性
,
热分解机理
,
密度泛函理论
