LI Chong-wei
,
CHENG Guo-guang
,
WANG Xin-hua
,
ZHU Guo-sen
,
CUI Ai-min
钢铁研究学报(英文版)
A mathematical model in present study has been established to investigate the effect of Rheinstahl Heraeus (RH) blow argon mode on the decarburization rate in ultra-low carbon steel refining based on the RH equipment of Shougang Qian′an Iron and Steel Co Ltd (SQISCO). The calculated results show that the increase of argon flowrate promotes the carbon elimination from argon gas bubble surface, molten steel free surface in vacuum as well as splash droplet surface, while reduces that from the interior of liquid steel. It has been found the critical turning point of flowrate ascension is at the 5th minute and the optimum blow argon flowrate in later stage is 2100 L/min in accordance with the 2 stages argon blow mode, which have been confirmed in the commercial production in SQISCO.
关键词:
RH
,
vacuum
,
mathematical model
,
argon flowrate
,
decarburization
Physics of Life Reviews
Commentaries by Philip W.T. Pong, Nongyue He, S.D. Liang, Tao Song, Yuri Gaididei and Sergey Volkov and Alexander Y. Grosberg on my review article (Pang, 2011 [1]) are answered. The validity of Davydov's mechanism of bio-energy transport, the completeness of theory, outstanding problems, the normalization and validity of wave function of the system in Pang' model as well as other related problems are elucidated in detail. (C) 2011 Elsevier B.V. All rights reserved.
关键词:
biological temperature;3 channels;soliton;model
Scripta Materialia
A recent comment on a previously published paper addressed the invalid explanation of the off diagonal interdiflusion coefficients of the beta-Ni(Al,Cr) phase in the Ni-Cr-Al system according to the symmetric property of the thermodynamic matrix. In this paper, the experimental data presented by Hou et al. was reanalyzed and the interdiffusion coefficient matrix was estimated again. The results of the analysis have been discussed in terms of a brief reply to the comments of Liu and Liang. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
关键词:
Diffusion;Intermetallic compound;Ni-Cr-Al
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
李璟
,
金明
,
田东艳
,
兑关锁
复合材料学报
doi:10.3321/j.issn:1000-3851.2006.04.026
对NiTi形状记忆合金纤维拔出的力学模型进行了探讨.在恒温状态下,考虑纤维和基体间的界面摩擦力,分别用两种本构理论,即Tanaka的指数模型和C.Liang的余弦模型,讨论了形状记忆合金纤维在变轴力作用下的拉伸问题.推导了形状记忆合金纤维拔出量的表达式,并给出数值计算结果.由指数模型和余弦模型得到的结果非常吻合,证明了这种理论方法是正确的.
关键词:
形状记忆合金
,
NiTi纤维
,
拔出
,
本构模型
,
变轴力
吴成宝
,
盖国胜
,
杨玉芬
,
董怀
材料导报
阐述了预测聚丙烯(PP)/无机粒子复合材料弹性模量的复合法则、 Eistein方程及其修正、Kerner方程、Liang方程.从结构因素方面分析了弹性模量的影响因素.分析表明:无机粒子的粒径越小、分布越合理,其填充PP复合材料的弹性模量越大;与球形、方形等其它粒子相比,长径比较大的薄片状无机粒子具有更强的增强复合材料弹性模量的能力;复合材料的弹性模量随无机粒子含量的增加而提高;提高无机粒子-PP树脂的界面黏结强度以及改善无机粒子在树脂中的分散状态可以提高复合材料的弹性模量.最后指出,影响因素的定量表征和多因素分析是今后的主要研究方向.
关键词:
无机粒子
,
聚丙烯
,
复合材料
,
弹性模量
刘建国
,
安振涛
,
张倩
,
杜仕国
,
姚凯
,
王金
材料导报
doi:10.11896/j.issn.1005-023X.2017.04.030
为评估氧化剂硝酸羟胺的热稳定性,使用标准液体铝皿于3 K/min、4 K/min、5 K/min加热速率下进行热分析.借助非等温DSC曲线的参数值,应用Kissinger法和Ozawa法求得热分解反应的表观活化能和指前因子,根据Zhang-Hu-Xie-Li公式、Hu-Yang-Liang-Xie公式、Hu-Zhao-Gao公式以及Zhao-Hu-Gao公式,计算硝酸羟胺的自加速分解温度和热爆炸临界温度,并对热分解机理函数进行了研究.设计了7条热分解反应路径,采用密度泛函理论B3LYP/6-311++G(d,p)方法对硝酸羟胺的热分解进行了动力学和热力学计算.计算结果表明,硝酸羟胺热分解的自加速分解温度TsADT=370.05 K,热爆炸临界温度Te0=388.68K,Tbp0=397.54 K,热分解最可几机理函数的微分形式为f(a) =17×(1-α)18/17.硝酸羟胺热分解各路径中,动力学优先支持路径Path 6、Path 5、Path 4和Path 1生成NO和NO2,其次是Path 2、Path 7和Path 3生成N2和N2O.温度在373 K以下时,Path 1'反应无法自发进行,硝酸羟胺无法进行自发的热分解.从热力学的角度来看,硝酸羟胺在370.05K以下储存是安全的.
关键词:
硝酸羟胺
,
热分析
,
热稳定性
,
热分解机理
,
密度泛函理论
