SUN Wenqiang
,
CAI Jiuju
,
MAO Hujun
,
GUAN Duojiao
钢铁研究学报(英文版)
As the largest energy consuming manufacturing sector and one of the most important sources of carbon dioxide (CO2) emissions, the China′s iron and steel industry has paid attention to the study of changing trend and influencing factors of CO2 emissions from energy use. The logarithmic mean Divisia index (LMDI) technique is used to decompose total change in CO2 emissions into four factors: emission factor effect, energy structure effect, energy consumption effect, and steel production effect. The results show that the steel production effect is the major factor which is responsible for the rise in CO2 emissions; whereas the energy consumption effect contributes most to the reduction in CO2 emissions. And the emission factor effect makes a weak negative contribution to the increase of CO2 emissions. To find out the detailed relationship between change in energy consumption or steel production and change in CO2 emissions, the correlation equations are also proposed.
关键词:
CO2 emissions
,
energy use
,
LMDI technique
,
steel production
,
energy consumption
王君
,
邹家桂
,
陈政标
,
高建武
,
刘彦坤
,
张杰元
,
宋莎
绝缘材料
为解决苯乙烯和甲基苯乙烯在VPI浸渍树脂应用于风力发电机中的不足，采用不饱和聚酯亚胺、引发剂和无挥发活性稀释剂研制出116HU聚酯亚胺无挥发浸渍树脂，并对其各项性能进行了研究。结果表明：116HU聚酯亚胺无挥发浸渍树脂的常规性能满足风力发电机的要求，其耐热等级可达H级。用该树脂浸渍的风电模拟线棒具有优异的介电性能、耐湿热交变和高低温循环冲击性能及耐盐雾性能等，能满足风力发电机在极端环境运行的要求。
关键词:
聚酯亚胺
,
无挥发
,
VPI
,
风力发电机
,
耐湿热
,
耐盐雾
Applied Surface Science
A novel kind of micro-arc oxidation (MAO) coating was prepared on magnesium alloy surface coated with rare earth conversion film (RE-film) in an alkaline aluminum oxidation electrolyte by AC power source. Inspection of scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) microspectroscopy, the structure and composition of MAO coating formed on AZ91D with RE-film under different applied voltages were investigated and the performance of the optimized MAO coating compared with the MAO coating directly formed on magnesium alloy. As the pretreatment of magnesium alloy with RE-film, the cerium oxides can be incorporated into the MAO coatings, reduce porosity of the MAO coating surface and enhance the thickness of MAO coating. These structure features and the cerium oxides incorporated into the MAO coating result in greatly improved corrosion resistance. Base on electrochemistry impedance spectroscopy (EIS) measurement, the electronic structure and composition analysis of the MAO coating, a double-layer structure, with a compact inner layer and a porous outer layer, of the coating was proposed for understanding its corrosion process. (C) 2010 Elsevier B.V. All rights reserved.
关键词:
Magnesium alloy;Rare earth conversion film;Micro-arc oxidation;Porosity;az31 magnesium alloys;micro-arc oxidation;mg-al alloys;electrolyte;resistance;cerium;phosphate
Science China-Technological Sciences
Product/metal ratio (PMR) was introduced as a novel criterion for the evaluation of electrolytes on micro-arc oxidation (MAO) of Mg and its alloys. The criterion initially sprang from Pilling-Bedworth ratio (PBR), focused on the roles of electrolytes for the compactness of the fabricated coatings, and took attention on properties of reactants/products during MAO. Meanwhile, based on our experiments as well as the results from literatures, the effects of electrolyte additives on morphologies and compositions of the fabricated MAO coatings of Mg alloys were exploited for verification and supplement of the initial criterion. In combination of the initial PMR criterion and experimental verification, PMR could be represented by special mode (PMR (s)=V (oxide products)/V (alloy substrates)) and general mode (PMR (g)= PMR (s)+ PMR (d)). The ideal PMR (s) should be between 1 and 2, while PMR (d) is related to the coating deposition during MAO. PMR (d) is a supplement to PMR (s) when the effect of the overlaying property (O) of the coatings and the effective deposition (D) of electrolyte composites are considered (PMR (d)=f(O, D). O is related to the melting point (MP) and boiling point (BP) of the MAO products. D is related to the effective reactions between alloy substrates and electrolytes during MAO.
关键词:
micro-arc oxidation;Mg alloys;Pilling-Bedworth ratio;product/metal;ratio;az91d magnesium alloy;electrochemical corrosion behavior;silicate-containing electrolytes;ceramic coatings;potassium fluoride;resistance;films;surface;microstructure;technology
Electrochimica Acta
Protective composite coatings were prepared on magnesium alloy AZ91D by micro-arc oxidation (MAO) treatment plus a top coating with sealing agent using multi-immersion technique under low-pressure conditions. The corrosion resistance of AZ91D alloy with composite coatings was superior evidently to that with merely MAO film. SEM observations revealed that the sealing agent was integrated with MAO film by physically interlocking; therewith covered uniformly the surface as well as penetrated into pores and rnicro-cracks of MAO film. The anti-corrosion properties in 3.5% NaCl solution of the composite coatings were evaluated by using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. Based on the results of chronopotentiometric (E similar to t) and EIS measurements for long time immersion in 3.5% NaCl solution, appropriate equivalent circuits for the composite coatings system were proposed. It follows that due to the blocking effect of the sealing agent in pores and cracks in MAO film, the composite coatings can suppress the corrosion process by holding back the transfer or diffusion of electrolyte and corrosion products between the composite coatings and solution during immersion. (c) 2005 Elsevier Ltd. All rights reserved.
关键词:
composite coatings;MAO film;sealing;magnesium alloy AZ91D;EIS;micro-arc oxidation;impedance spectroscopy;interfacial factors;phosphate coatings;alkaline-solutions;aluminum-alloys;nacl solution;anodic films;mg alloys;part 2
Materials and Corrosion-Werkstoffe Und Korrosion
A rapid and convenient anodization technology with AC power source to obtain the MAO films formed on magnesium alloy AZ91D in phosphate bath (base electrolyte + Na3PO4) with or without aluminate and silicate was studied. The corrosion resistance of the anodic films was studied by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques and the microstructure and composition of films were examined by SEM and XRD. The results show that Na3PO4 can promote the occurrence of sparking during the MAO process, while abundant heat generated by sparking might enhance the formation of the glassy phase of the compound when the electrolyte contains the additives of NaAlO2 and Na2SiO3 simultaneously. The optimized MAO film is ivory-white smooth by naked eye, while presents porous and microcracks in microscopic scale. The anodic film formed in the alkaline solution with optimized parameters possesses superior corrosion resistance by electrochemical test. The XRD pattern shows that the components of the anodized film consist of MgO, MgAlO2, and MgSiO3. No oxide crystal with P element can be found.
关键词:
micro-arc oxidation;electrochemical impedance spectroscopy;koh-aluminate solutions;corrosion protection;ceramic coatings;alloys;anodization;parameters;resistance;behavior
杨巍
,
汪爱英
,
柯培玲
,
代伟
,
张学谦
材料工程
doi:10.3969/j.issn.1001-4381.2012.04.019
采用线性离子束沉积技术于AZ80镁合金微弧氧化(MAO)陶瓷层表面沉积不同厚度的类金刚石碳(DLC)膜,形成DLC/MAO复合膜层.对比研究4种膜基系统的表面结构特征、力学性能以及摩擦学性能差异.结果表明:随DLC膜厚度增加,复合膜层表面微孔数量减少,孔径减小,但凹凸不平趋势增加,且DLC膜表面颗粒特征更加明显,表现为DLC-80min/MAO/AZ80膜基系统具有最小的表面粗糙度,最大的硬度H、弹性模量E及H/E值；不同厚度DLC/MAO/AZ80膜基系统平均摩擦因数较MAO/AZ80显著降低；DLC膜厚度增加导致3种复合膜基系统的表面微观结构改变,使得摩擦因数与磨痕形貌存在差异；各膜基系统表面磨痕处均形成了Fe的转移层,由于表层DLC膜“裸露”的大量C对磨损界面具有很好的润滑作用,而使得镁合金基体获得有效保护.
关键词:
镁合金
,
微弧氧化
,
类金刚石碳膜
,
微观结构
,
性能
刘永明
,
贺晓慧
,
陈义旺
,
伍青
催化学报
采用双-(β-酮萘胺)镍(Ⅱ)为主催化剂,以甲基铝氧烷(MAO)为助催化剂,在甲苯溶剂中进行了苯乙烯聚合实验,并考察了聚合温度、Al/Ni摩尔比、单体浓度和聚合时间等因素对聚合反应的影响. 结果表明,双-(β-酮萘胺)镍(Ⅱ)/MAO催化剂显示出很高的催化活性,可催化苯乙烯聚合得到中等分子量和分子量分布较窄(Mw/Mn＜1.6)的聚苯乙烯. 采用核磁共振氢谱、核磁共振碳谱、傅里叶变换红外光谱、差示扫描量热法和广角X射线衍射技术对聚合产物进行了表征. 结果表明,所得聚合物为无规聚苯乙烯.
关键词:
镍
,
络合物
,
后过渡金属催化剂
,
苯乙烯
,
聚合
,
聚苯乙烯
聂玉静
,
孙俊全
,
王临才
材料科学与工程学报
doi:10.3969/j.issn.1673-2812.2007.04.001
合成了β-酮亚胺和苯氧基亚胺杂配钛配合物5.以MS,1HNMR表征了配体及配合物.配合物5经MAO(甲基铝氧烷)活化,在甲苯中成功催化乙烯聚合.在25℃,铝/钛摩尔比为2000,0.1MPa下,催化活性达3.2×105 g PE/(mol·Ti·hr).所得聚乙烯粘均分子量可达1.4×105 g/mol,分子量分布为2.95.反应压力从0.1MPa提高到0.6MPa时,催化体系活性增加1倍,聚乙烯粘均分子量下降.
关键词:
杂配钛配合物
,
乙烯聚合
,
β-酮亚胺
,
苯氧基亚胺
