欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(23615)
  • 图书()
  • 专利()
  • 新闻()

Fatigue Behaviour of Naval Steel Under Seawater Environmental and Variable Loading Conditions

C Gheorghies , L Palaghian , S Baicean , M Buciumeanu , S Ciortan

钢铁研究学报(英文版)

The way to characterize the behaviour of a naval steel grade E36 subjected to the corrosive fatigue process is investigated. The tests were carried out by bending fatigue of plate specimens with thickness of 10 mm in the corrosive environment consisting of an aqueous solution of 35% of NaCl which is similar to seawater. Experimental results show that the principal mechanism of degradation of the superficial layer is based on the pit evolution, evidenced by electrochemical, micro and macro structural timely changes such as evolution of electrode potential, evolution of current density, polarization resistance, anodic and cathodic parameters, and dislocation density evolution.

关键词: naval steel , fatigue , pitting corrosion , structure

超塑性 m-δ关系

刘勤 , 周善佑

材料研究学报

超塑性m-δ关系曲线可以分为m_L=m_(max)和m_L=m_(min)两大类型。均可由下面的C.L.(刘勤)m-σ方程表示:σ(%)=〔cε~(m-m_0)-1〕×100当σ=σ_0=0时,m=m_0≠0,C=C_0=κ_0/κ_0=1。当σ=σ_1(σ_(11),σ_(12),σ_(13),…,)时,m=m_1(m_(11),m_(12),m_(13),…),C=C_1(C_(11),C_(12),C_(13),…)=κ_1(κ_(11),κ_(12),κ_(13),…)/κ_0,当σ=σ_F时,m=m_F,C=C_F=κ_F/κ_0。对C 值进行“规划”,得到的C_1~(σ_O-σ_L)-(m_L=m_(max)),C_2~(σ_F-σ_L)-(m_L=m_(min)),C_3~(m_0-m_L)-(m_L=m_(max)和C_4~(m_F-m_L)-(m_L=m_(min))四种类型的“规划”方程分别对m_L=m_(max)和m_L=m_(min)型m-σ曲线适用。若m-σ曲线属简单的下降式,C 及其“规划”值均可近似地取1。否则,C-σ关系是应加以研究的问题。m 和k 值对σ值的效应可以分为动态(直接)和静态(间接)两种。最后的σ值是两种效应的综合结果。(注:m 和κ值见基本方程σ=κε~m)

关键词:

mM)/m(P)比值对磷酸镁水泥干燥收缩的影响及机理研究?

戴丰乐 , 齐召庆 , 汪宏涛 , 姜自超 , 张时豪 , 丁建华

功能材料 doi:10.3969/j.issn.1001-9731.2016.12.022

研究了m(M)/m(P)比值对磷酸镁水泥干燥收缩行为的影响,采用温度记录仪、压汞仪、X 射线衍射仪、扫描电镜及能谱仪等分析手段探讨了m(M)/m(P)比值对磷酸镁水泥干燥收缩的作用机理。结果表明,随着m(M)/m(P)比值的增大,磷酸镁水泥水化初期的膨胀量以及干燥收缩减小;水化8 h左右水泥开始收缩,龄期达到20 d左右收缩趋于稳定;磷酸镁水泥收缩量的减少,是由于m(M)/m(P)比值的增大导致磷酸镁水泥水化温度降低,孔隙率增大,水化产物MgKPO4?6 H2 O 减少,水化产物结构趋于疏松。

关键词: 磷酸镁水泥 , 干燥收缩 , m(M)/m(P)比值

m(M)/m(P)比值对磷酸镁水泥石自收缩的影响及机理研究

齐召庆 , 汪宏涛 , 薛明

功能材料 doi:10.3969/j.issn.1001-9731.2016.02.010

采用改进的非接触式混凝土收缩测定仪及标靶,研究了m(M)/m(P)比值(MgO与KH2PO4的质量比)对磷酸镁水泥石自收缩行为的影响,运用八通道微量量热仪、压汞仪、X射线衍射仪、扫描电子显微镜及能谱仪等分析手段,分析了m(M)/m(P)比值对磷酸镁水泥石自收缩的作用机理.结果表明,磷酸镁水泥石的自收缩呈现出3个阶段的特征,即早期的迅速收缩阶段、微膨胀阶段、收缩缓慢发展阶段.随着m(M)/m(P)比值的增大,由于磷酸镁水泥石的水化放热量降低,水泥石内部孔隙率增大,水化产物结晶度降低,水泥石结构疏松,所以,自收缩率减小.

关键词: 磷酸镁水泥 , 自收缩 , m(M)/m(P)比值

Deuton-M magnetic tapes and sheets for cards

Tesshu Miyahara

材料科学技术(英文)

Magnetic stripe is one of the major applications of magnetic materials. As a key component of the present card technologies magnetic stripes play reliable components for electronic data interchange in worldwide electronic payment systems such as financial cards, transit tickets and phone cards, etc. Magnetic stripes are available in various coercivity materials, widths, lengths, structures and colors with each types of transferable, lamination and pressure sensitive magnetic tapes of Deuton-M. Manufacturing process, structure and characteristics of Deuton-M magnetic tape and sheet are described.

关键词:

2.6~2.8μm KTP OPO实验研究

卞进田 , 孙晓泉 , 聂劲松

量子电子学报 doi:10.3969/j.issn.1007-5461.2008.02.019

为了得到2.7 μm波段可调谐激光辐射,设计了信号光单谐振荡KTP光参量振荡器(OPO),给出了KTP OPO II(B)类相位匹配方式下的角度调谐曲线、有效非线性系数.KTP晶体切割角为θ=62°,ψ=0°,有效非线性系数为-2.97 pm/V.利用该KTP OPO实现了2.6~2.8 μm波段范围可调谐激光输出,用脉宽为16 ns的基模高斯光束1.064 μm激光泵浦得到了最大能量578 μJ,能量转换效率达1.7%.

关键词: 非线性光学 , 可调谐红外激光 , 单谐振光参量振荡器 , KTP , 角度调谐 , 相位匹配

φ3.2m×3.1m球磨机齿轮轴损坏分析及解决方案

刘险峰

金属世界 doi:10.3969/j.issn.1000-6826.2007.05.020

针对φ3.2m×3.1m球磨机齿轮轴损坏的四种形式,分别进行分析,提出了解决方案.

关键词: 球磨机齿轮轴 , 断裂 , 磨损 , 解决方案

Stable M(2)AlC(0001) surfaces (M = Ti, V and Cr) by first-principles investigation

Journal of Physics-Condensed Matter

We investigated the stable (0001) surfaces of M(2)AlC (M = Ti, V and Cr) using the first-principles plane-wave pseudopotential total energy method. Four possible (0001) terminations were considered by breaking the M-Al and M-C bonds. The corresponding surface energies were calculated and compared. The Al-and M(C)-terminated (0001) surfaces demonstrated better stability than the C- and M(Al)-terminated surfaces by their much lower surface energies. In addition, the stability of surfaces was predicted under various chemical environments as a function of chemical potentials. We further investigated the character of surface relaxations. The electronic structures of the stable Al- and M(C)-terminated surfaces were analyzed.

关键词: ab-initio calculations;ti3sic2 thin-films;electronic-structure;elastic stiffness;al;deposition;cr2alc;simulation;adhesion;solids

580m3高炉开炉实践

王少红 , 刘志勇

金属世界 doi:10.3969/j.issn.1000-6826.2009.01.005

本文主要介绍了承德建龙炼铁厂580m3高炉开炉前的准备工作、开炉方案的确定以及开炉生产实践等.本次开炉采用了热风点火、全焦开炉等当前新方法,通过制订合理的烘炉和开炉方案,高炉开炉取得圆满成功,生产水平快速提高.

关键词: 高炉 , 开炉 , 烘炉 , 效果

KGW晶体1.067μm激光特性研究

邱闽旺 , 涂朝阳 , 李坚富 , 黄奕川 , 汪爱栋 , 唐鼎元 , 王元康

量子电子学报 doi:10.3969/j.issn.1007-5461.2001.04.012

本文报道了我所生长的掺钕钨酸钾钆(KGW)晶体的脉冲激光特性.当用氙闪光灯泵浦时,尺寸为φ3.4 mm×24 mm的KGW激光棒,最大激光输出为每个脉冲358.4mJ,总效率为1.7%,斜率效率为3.3%,波长为1.067μm.实验证明,KGW是一种很有前途的小型激光器工作物质.

关键词: 掺钕钨酸钾钆(KGW)晶体 , 1.067 μm激光

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共2362页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词