刘欣艳
,
赵煜娟
,
夏定国
功能材料
LiNi0.8Co0.2O2是锂离子电池界公认的最有希望取代商业化正极材料LiCoO2的新型正极材料之一.本文所研究的复合正极材料LiNi0.8Co0.2O2是由细小的晶粒构成的球形颗粒,单一相,属于R3m空间群.对复合材料LiNi0.8Co0.2O2的Co-K和Ni-K的XANES分析可知,在600～850℃范围温度对于钴元素的影响不明显,而对于镍元素的影响比较显著,随着Ni-K边位置向高能量移动LiNi0.8Co0.2O2正极材料的放电容量升高.复合材料LiNi0.8Co0.2O2和LiNiO2的Ni-K边XANES相似,表明少量钴的引入对晶体结构的改变不是太多,但是峰的强度较高和峰的位置向高能量移动,表明钴Co对Ni的局域结构进行了调制.
关键词:
LiNi0.8Co0.2O2
,
XANES
,
正极材料
,
局域结构
JIN Zhanpeng DU Yong Central-south Technological University
,
Changsha
,
China.
材料科学技术（英文）
The interaction parameters for various phases in the Ti-W and Pd-W systems were calcula- ted using phase diagram information by means of a numerical procedure.The approach differs significantly from the trial and error method and has the advantage of being very robust in the sense that one can make full use of the accurate experimental phase diagram data and deal with situations which are difficult or even impossible for the trial and error method. Using calculated parameters and lattice stability values for Ti,W and Pd given in literature, the diagrams of the above systems were recalcula- ted.The results are in good agreement with experimental information.
关键词:
optimization
,
null
,
null
,
null
Haiwu ZHENG
,
Junjie ZHU
,
Zhuxi FU
,
Bixia LIN
,
Xiaoguang LI
材料科学技术（英文）
3C-SiC films have been deposited on Si (111) substrates by the low-pressure vertical chemical vapor deposition (LPVCVD) with gas mixtures of SiH4, C3H8 and H2. The growth mechanism of SiC films can be obtained through the observations using field emission scanning electron microscope (FESEM). It is found that the growth process varies from surface control to diffusion control when the deposition temperature increases from 1270 to 1350℃. The X-ray diffraction (XRD) patterns show that the SiC films have good crystallinity and strong preferred orientation. The results of the high resolution transmission electron microscopy (HRTEM) image and the transmission electron diffraction (TED) pattern indicate a peculiar superlattice structure of the film. The values of the binding energy in the high resolution X-ray photoelectron spectra (XPS) further confirm the formation of SiC.
关键词:
3C-SiC films
,
null
,
null
吴运军
,
张武
,
马怀柱
稀土
doi:10.3969/j.issn.1004-0277.2003.06.004
采用Schlenk技术,在干燥纯氩气保护下,用无水三氯化稀土LnCl3与2-苯基茚以1∶2的摩尔比在THF中反应,得到8种新配合物:(2-ph-Ind)2LnCl (A)[Ln=La(1), Pr(2), Nd(3), Sm(4), Gd(5), Dy(6), Yb(7), Y(8)].再用(A)和LiN(TMS)2在THF中反应,得到两种新的二(2-苯基茚)稀土有机配合物:(2-ph-Ind)2LnN(TMS)2 (B)[Ln=Y(1), Sm(2)].所有配合物都经元素分析、红外和质谱鉴定.配合物(B)在甲基丙烯酸甲酯(MMA)的聚合反应中显示出一定的活性.
关键词:
稀土合成
,
配合物
,
聚合
,
2-苯基茚
贺慧
,
程璇
,
张颖
,
杨勇
功能材料
利用溶胶-凝胶预处理固相方法合成了锂离子电池正极材料LiM0.9Ti0.1O2(M=Ni,Co),通过XRD对合成的材料进行结构分析,并将其组装成电池进行了电化学测试,对两种材料LiN0.9Ti0.1和LiCo0.9Ti0.1进行了比较.结果发现,LiCo0.9Ti0.1O2的结构和性能要好于LiNi0.9Ti0.1O2,根据实验结果对其原因进行了初步的分析.
关键词:
锂离子电池
,
正极材料
,
电化学性能
李红生
,
雷天民
,
冯谦
,
郑春蕊
,
葛莉玲
,
刘守智
人工晶体学报
doi:10.3969/j.issn.1000-985X.2005.02.026
本文以Na2S·9H2O和SnCl2·2H2O为反应源物,采用超声辅助液相合成法制备SnS纳米粉.用XRD、TEM和TED等方法对粉体样品进行了表征,检测结果表明粉体样品为具有斜方晶体结构的SnS纳米微粒,其平均晶粒尺寸约为15～25nm.论文还简要讨论了超声波对SnS纳米粉形成的影响,分析认为超声辅助手段的加入有利于多晶SnS纳米粉的形成.
关键词:
多晶SnS
,
纳米粉
,
超声
,
液相合成
常照荣
,
郁旭
,
汤宏伟
,
王超楠
,
魏文强
功能材料
利用低共熔组成的0.38LiOH " H20-0.62LiN03混合锂盐体系与共沉淀合成的前躯体Ni1/3Co1/3Al1/3 (OH)2简单混合,经三阶段温度烧结制备出锂离子电池正极材料LiNi1/3 CO1/3 A11/3 O2,该法工艺简单,成本低,无需研磨即可以使物料在低共熔点温度上达到均匀混合的目的.经X粉末射线衍射(XRD)分析表明,合成的LiNili 1/3 CO1/3 Al1/3 O2具有典型的a-NaFeO2六方层状结构,其特征衍射峰I(003) /I(104)的峰强比值高达1.73.电性能测试表明,在5 5 0C,电压范围为2.8-4.3V,充放电倍率为0.2C的条件下,首次充放电比容量为156.4mAh/g,30次循环后容量保持率为94.1%,l和2C倍率放电容童仍可达到143.2和127.9mAh/g,其电性能均优于常温下的性能.
关键词:
锂离子电池
,
低共熔盐
,
掺杂
,
LiNi1/3CO1/3Al1/3O2
