PEI Zhong-ye
,
HAN Wei
,
ZHAO Gang
,
CHEN Xing-fu
,
LI Jun-tao
,
TIAN Yan-wen
钢铁研究学报(英文版)
K465 superalloy, as a material for production of turbine nozzle, shows high mechanical properties as well as microstructure stability in critical and severe service conditions. The alloy gains its appropriate microstructure and strength through solid solution strengthening mechanism. Heat treatment parameters such as: time and temperature of homogenization, partial solution and aging temperatures, and cooling rate from solid solution affect the microstructure of the alloy. Among these parameters cooling rate from solid solution is the most effective. Therefore, in this study the effect of cooling rate on microstructure and mechanical properties (tensile and stress properties) were investigated. For this purpose, three different cooling rates were applied on the cast K465 specimens after solution treatment at 1210℃ for 4 h. Microstructures of the specimens then were studied using optical and electron microscopy. Also, tensile tests were performed at room temperature and stress rupture tests were performed under the condition of 975℃ and 230 MPa. It was found out that with increasing cooling rate the size of the γ' precipitates decreases and the mechanical properties of specimens increases. Also, it was shown that the shape and volume fraction of primary γ' particles are largely influenced by the cooling rate following solution treatment at 1210℃ for 4 h.
关键词:
cast superalloy;solution heat treatment;cooling rate;microstructure;mechanical properties
刘文鹏
,
张庆礼
,
杨华军
,
周鹏宇
,
孙敦陆
,
高进云
,
谷长江
,
罗建乔
,
王迪
,
殷绍唐
量子电子学报
doi:10.3969/j.issn.1007-5461.2011.02.018
采用固相反应法制备了Bi3+、Eu3+、Tb3+掺杂的Lu3TaO7.测量了样品的X射线衍射谱、激发和发射光谱及荧光衰减曲线.三种离子掺杂的Lu3TaO7均呈现出强的荧光发射,其中Bi3+具有峰位在431 nm处的一强发射宽带,衰减寿命为16.8μs,Eu3+、Tb3+则表现出稀土离子的特征锐发射峰,衰减寿命分别为1.26 ms和1.20 ms.因此,它们均是具有潜在应用前景的重闪烁体材料.
关键词:
材料
,
闪烁体
,
Lu3TaO7
,
发光
李志宏
,
柳卫平
,
白希祥
,
郭冰
,
连钢
,
颜胜权
,
王宝祥
,
陆昀
,
曾晟
,
苏俊
原子核物理评论
doi:10.3969/j.issn.1007-4627.2005.01.006
利用8Li次级束测量了质心系能量7.8 MeV 2H(8Li, 9Li)1H反应的角分布, 导出了8Li(d, p)9Li反应的天体物理S因子及9Li→8Li+n虚衰变的渐近归一化系数.
关键词:
8Li(d,p)9Li反应
,
角分布
,
天体物理S因子
,
渐近归一化系数
HUANG Jianshun CHEN Junming Shanghai Institute of Metallurgy
,
Academia Sinica
,
Shanghai
,
China Research Associate
,
Shanghai Institute of Metallurgy
,
Academia Sinica
,
Shanghai 200050
,
China
金属学报(英文版)
Crystal structure of γ-Li_xFe_2O_3,inserted Li electrochemically,was studied by Moss- bauer spectroscopy together with X-ray diffraction,XPS and electrochemical method,On the insertion of Li at low current density,the crystal structure is keeping original spinel; while at higher current density or by thermal activation,owing to violent movement of Li~+ ions,part of crystal structure transforms into rock type similar to face-centered cubic structure of ferrous oxide.The transition channels during insertion of Li~+ ions and limitation of Li~+ ions inserted were discussed.
关键词:
null
,
null
,
null
Journal of Materials Research
The effect of Li(3)N additive on the Li-Mg-N-H system was examined with respect to the reversible dehydrogenation performance. Screening Study with varying Li(3)N additions (5, 10, 20, and 30 mol%) demonstrates that all are effective for improving the hydrogen desorption capacity. Optimally, incorporation of 10 mol% Li(3)N improves the practical capacity from 3.9 wt% to approximately 4.7 wt% hydrogen at 200 degrees C, which drives the dehydrogenation reaction toward completion. Moreover, the capacity enhancement persists well over 10 de-/rehydrogenation cycles. Systematic x-ray diffraction examinations indicate that Li(3)N additive transforms into LiNH(2) and LiH phases and remains during hydrogen cycling. Combined structure/property investigations suggest that the LiNH(2) "seeding" should be responsible for the capacity enhancement, which reduces the kinetic barrier associated with the nucleation of intermediate LiNH(2). In addition, the concurrent incorporation of LiH is effective for mitigating the ammonia release.
关键词:
complex hydrides;improvement;mixtures;imides;amide;h-2
MANG Weishi WANG Guozhi ZHANG Yongchang HU Zhuangqi SHI Changxu Institute of Metal Research
,
Academia Sinica
,
Shenyang
,
China Yongchang Associate Professor
,
Institute of Metal Research
,
Academia Sinica
,
Shenyang 110015
,
China
金属学报(英文版)
A rapidly solidified microcrystalline Al-Li-Cu-Mg-Zr alloy and its superplasicity have been investigated.An optimum tensile elongation of 585% was obtained at 540℃ and strain rate 1.67×10~(-2)s~(-1).The superplastic Al-Li alloy is manufaetured using thermomechanical pro- cessing:solution,overaging,warm rolling and recrystallization.Microstructural changes in thermomechanical processing and cavitation occurred during superplastic deformation have been observed.The superplastic failure of alloy may be caused mainly by nucleation and growth of cavities as well as the linkage around grains.
关键词:
superplasticity
,
null
,
null
,
null
