L. P. Karjalainen (Department of Mechanical Engineering
,
University of Oulu
,
Oulu
,
Finland)
金属学报(英文版)
Modelling has become a more and more valuable tool in the design, control and development of steel processing. Empirical regression equations, physically based approachs, artificial neural networks and hybrid models are being theied in computer modelling. In all cases, relevant data are necessary, which can be most economically obtained by physical simulation. Physical simulation with a Gleeble simulator has been used in a large number of tasks at the University of Oulu for ten years in cooperotion with the Finnish metals industry. Some examples of these will be described and discussed below, such as the optimization of the recrystallization controlled rolling process, the improvement of the hot strength model for the control of coiling tension and the optimization of continuous strip annealing schedules.Finally,brief remarks will be then on a couple of projects now under way.
关键词:
physical simulation
,
null
,
null
,
null
,
null
SONG Ren-bo
,
XIANG Jian-ying
,
HOU Dong-po
钢铁研究学报(英文版)
A comparative study on mechanical properties and microstructure of 316L austenitic stainless steel between solution treated specimen and hot rolled specimen was conducted. After a specimen was subjected to solution treatment at 1050 ℃ for 6 min, its mechanical properties were determined through tensile and hardness tests. Based on the true stress vs true strain and engineering stress vs engineering strain flow curves, the work hardening rate has been explored. The results show that the solution treated specimen has an excellent combination of strength and elongation, and that this steel is easy to work-hardening during deformation. Optical microscope, scanning electron microscope, transmission electron microscope and X-ray diffraction examinations were conducted, these reveal that twins in 316L austenitic stainless steel can be divided into suspended twin and transgranular twin which have different formation mechanisms in growth, and that the deformation induced martensite nucleated and grown in the shear band intersections can be observed, and that the fracture surfaces are mainly composed of dimples and exhibit a tough fracture character.
关键词:
316L
,
mechanical property
,
twin
,
martensite
,
fracture morphology
高健
,
康健
,
吴学玲
,
徐競
,
李邦梅
,
邱冠周
中国有色金属学报
以分离于江西某铜矿的嗜铁钩端螺旋菌(L. ferriphilum YSK)菌株为研究对象,报道不同Fe2+浓度对 L. ferriphilum生长活性的影响.结果表明,YSK菌株生长最适宜的Fe2+浓度约为0.1 mol/L.当初始Fe2+浓度为0.4 mol/L时,进入对数生长期前很明显需要一个较长的延迟期,表明该Fe2+浓度对细胞的生长产生较强的抑制作用;当初始Fe2+浓度为0.6 mol/L时,YSK菌株的生长完全受到抑制.尽管高浓度的Fe2+抑制细胞的生长,但受到抑制而不生长繁殖的YSK细胞仍然具有氧化Fe2+的能力.
关键词:
L.ferriphilum YSK菌株
,
Fe2+
,
生长活性
Mehdi Ebrahimian-Hosseinabadi Fakhredin Ashrafizadeh Mohammadreza Etemadifar Subbu S. Venkatraman
材料科学技术（英文）
In this paper, preparation of nano-biphasic calcium phosphate (nBCP), mechanical behavior and load-bearing of poly (lactide-co-glycolide) (PLGA) and PLGA/nBCP are presented. The nBCP with composition of 63/37 (w/w) HA/β-TCP (hydroxyapatite/β-tricalcium phosphate) was produced by heating of bovine bone at 700°C. Composite scaffolds were made by using PLGA matrix and 10-50 wt% nBCP powders as reinforcement material. All scaffolds were prepared by thermally induced solid-liquid phase separation (TIPS) at -60°C under 4 Pa (0.04 mbar) vacuum. The results of elastic modulus testing were adjusted with Ishai-Cohen and Narkis models for rigid polymeric matrix and compared to each other. PLGA/nBCP scaffolds with 30 wt% nBCP showed the highest value of yield strength among the scaffolds. In addition, it was found that by increasing the nBCP in scaffolds to 50 wt%, the modulus of elasticity was highly enhanced. However, the optimum value of yield strength was obtained at 30 wt% nBCP, and the agglomeration of reinforcing particles at higher percentages caused a reduction in yield strength. It is clear that the elastic modulus of matrix has the significant role in elastic modulus of scaffolds, as also the size of the filler particles in the matrix.
关键词:
Scaffold
Materials Science & Engineering C-Biomimetic Materials Sensors and Systems
Bamboo, one of the strongest natural structural composite materials, has many distinguishing features. It has been found that its reinforcement unit, hollow, multilayered and spirally-wound bast fiber, plays an extremely important role in its mechanical behavior. In the present work, on the basis of the study on bamboo bast fiber and wood tracheid, a biomimetic model of the reinforcing element, composed of two layers of helically wound fiber, was suggested. To detect the structural characteristics of such a microstructure, four types of macro fiber specimens made of engineering composites were employed: axially aligned solid and hollow cylinders, and single- and double-helical hollow cylinders. These specimens were subjected to several possible loadings, and the experimental results reveal that only the double-helical structural unit possesses the optimum comprehensive mechanical properties. An interlaminar transition zone model imitating bamboo bast fiber was proposed and was verified by engineering composite materials. In our work, the transition zone can increase the interlaminar shear strength of the composite materials by about 15%. These biomimetic structural models can be applied in the design and manufacture of engineering composite materials.
关键词:
bamboo;bast fiber;biomimetics;engineering composites
Science
Strengthening materials traditionally involves the controlled creation of internal defects and boundaries so as to obstruct dislocation motion. Such strategies invariably compromise ductility, the ability of the material to deform, stretch, or change shape permanently without breaking. Here, we outline an approach to optimize strength and ductility by identifying three essential structural characteristics for boundaries: coherency with surrounding matrix, thermal and mechanical stability, and smallest feature size finer than 100 nanometers. We assess current understanding of strengthening and propose a methodology for engineering coherent, nanoscale internal boundaries, specifically those involving nanoscale twin boundaries. Additionally, we discuss perspectives on strengthening and preserving ductility, along with potential applications for improving failure tolerance, electrical conductivity, and resistance to electromigration.
关键词:
strain-rate sensitivity;stacking-fault energy;nano-scale twins;cu-al;alloys;nanocrystalline metals;mechanical-properties;activation;volume;copper;deformation;behavior
