LI Hiaogang
,
MENG Qinghai
,
CHEN Hua
,
CHEN Jinwei
,
YAO Zhiming
,
KE Wei(State Key Laboratory of Corrosion Science
,
Institute of Corrosion and Protection of Metals
,
Chinese Academy of Sciences
,
Shenyang 110015
,
China)(Fushun Petroleum Institute
,
Fushun 113001
,
China)
金属学报(英文版)
Hydrogen attack occurred in low carbon steel and steel 25CrMo which had been exposed in hydrogen under 18MPa at 450 and 500℃ for 240,480 and 720 h.The methane bubbles and microcracks grow along grain boundaries.The degree of hydrogen attack increases with increasing exposure time and temperature.Magnetic acoustic emission(MAE) was used to detect the degree of hydrogen attack.The results show that the characteristics of MAE for samples of low carbon steel and steel 15CrMo with hydrogen attack have changed obviously comparing to the samples without hydrogen attack,and the MAE signals was sensitive to the degree of hydrogen attack at the last stage of hydrogen attack.The magnetic detection way,as a new method of nonrestrictive testing of hydrogen attack,can be used to detect the hydrogen attack in practice.
关键词:
:magnetic acoustic emission
,
null
,
null
,
null
Corrosion Science
The early stages of the evolution of atmospheric corrosion of carbon steels exposed in both a laboratory simulated and a natural atmosphere environment in Shenyang have been observed by in situ scanning electron microscopy. In the case of laboratory cyclic wet-dry tests, even though the chloride content level is very low, filiform corrosion is initiated in the early stage. The filiform corrosion grows in random directions, forming a network of ridges. White nodules nucleate and grow on the ridges during continued corrosion and eventually connect with each other to form the initial corrosion scale. Pits were also found on the surface beneath corrosion products. In the case of a natural atmospheric environment, both filiform corrosion and other localized corrosion, such as pitting and inter-granular attack take place in the initial stage. It is obvious that there is variety of localized corrosion in the initial stage of atmospheric corrosion. (C) 2007 Elsevier Ltd. All rights reserved.
关键词:
steel;atmospheric corrosion;initial stage;localized corrosion;in-situ;iron;electrolyte;thickness
Materials Chemistry and Physics
The corrosion behaviour of CortenA weathering steel has been investigated using a laboratory accelerated test that involved cyclic wet/dry conditions in Qinghai salt lake water diluted 30 times The characteristics of the rust layers on tested samples were observed by SEM and EPMA analyzed by IRS and XRD and studied by polarization and EIS measurements The weight loss was almost linear indicating that the rust layer had no retarding effect on the corrosion process The crystalline components of the rust layers consisted primarily of beta-FeOOH magnetite (Fe(3)O(4)) and gamma-FeOOH As the corrosion proceeded the amount of beta-FeOOH decreased while that of magnetite and gamma-FeOOH increased XRD EDAX and EPMA indicated that the complex corrosion products magnesioferrite (MgFe(2)O(4)) and iowaite (Mg(4)Fe(OH)(8)OCl 4H(2)O) probably existed in the rust layer in which case they will have had an important Influence on the protectiveness of the rust layer The results of electrochemical measurements showed that the rust layer exhibited high reduction reactivity which facilitated the corrosion of weathering steel in the wetting process The large rust capacitance and small rust resistance indicated that the rust layer had a loose and porous structure which provided poor protection (c) 2010 Elsevier B V All rights reserved
关键词:
Elements;Corrosion test;Electrochemical techniques;Electron probe;low-alloy steels;atmospheric corrosion;carbon-steel;electrochemical;impedance;room-temperature;rust layers;iron;mechanism;products;environment
Surface & Coatings Technology
Using a halide-activated pack-cementation method but at a temperature (600 degrees C) noticeably lower than normal, an eta-Fe(2)Al(5) coating and two delta-Ni(2)Al(3) coatings with and without dispersions of CeO(2) nanoparticles were developed respectively on a low-carbon steel and the steel pretreated with an electrodeposited film of Ni or Ni-CeO(2). The erosion-corrosion (E-C) performance of the three aluminide coatings during 100 h exposure at similar to 600 degrees C in a coal-firing laboratory-scale fluidized-bed combustor (FBC) was investigated, by mounting the aluminized samples onto a rig which maintained rotation for accelerating the relative impacting speed of flying solid particles (mainly SiO(2) bed materials). The eta-Fe(2)Al(5) and the CeO(2)-free delta-Ni(2)Al(3) coatings experienced an unacceptable recession rate. Compared to the two CeO(2)-free aluminide coatings, the CeO(2)-dispersed delta-Ni(2)Al(3) coating offered profoundly improved E-C resistance, because the latter coating was not only strengthened by the CeO(2) dispersion and grain refinement, it also could grow a more adherent alumina scale. (C) 2011 Elsevier B.V. All rights reserved.
关键词:
Erosion-corrosion;CeO(2)-dispersion-strengthening;Aluminizing coating;Grain refinement;Hardening;Reactive element effect;oxidation resistance;reactive elements;alloy-steels;water-vapor;power-plant;nickel;combustion;mechanisms;additions;behavior
QIAO Lijie LIU Rui XIAO Jimei University of Science and Technology Beijing
,
Beijing
,
China
金属学报(英文版)
The effects of stress components on nucleation sites and propagation directions of stress cor- rosion cracks in brass were investigated with specimens under mode Ⅱ and mode Ⅲ loadings. The results indicated that under mode Ⅱ loading,stress corrosion cracks nucleated on the site with maximum normal stress component and propagated along the plane perpendieular to the maximum normal stress,under mode Ⅲ loading,the stress corrosion crack was not evident on the 45°plane due to the general corrosion in aqueous solution with high NH_4OH concentra- tion,while stress corroded in aqueous solution with low NH_4OH concentration, numerous cracks with spacings of 10—150μm were found on the 45°plane with maximum normal stress and no stress corrosion cracks was observed on the plane with maximum shear stress.
关键词:
stress corrosion cracking
,
null
,
null
,
null
材料科学技术（英文）
The effects of surface state and applied stress on the stress corrosion cracking (SCC) behaviors of thermally treated (TT) Alloy 690 in 10 wt% NaOH solution with 100 mg/L litharge at 330 degrees C were investigated using C-ring samples with four kinds of surface states and two different stress levels. Sample outer surfaces of the first three kinds were ground to 400 grit (ground), shot-peened (SP) and electro-polished (EP) and the last one was used as the as-received state. Two samples of every kind were stressed to 100% and 200% yield stress of Alloy 690TT, respectively. The results showed that the oxide film consisted of three layers whereas continuous layer rich in Cr was not found. The poor adhesive ability indicated that the oxide film could not protect the matrix from further corrosion. Lead was found in the oxide film and the oxides at the crack paths and accelerated the dissolution of thermodynamically unstable Cr in these locations and also in the matrix. The crack initiation and propagation on Alloy 690TT were effectively retarded by SP and EP treatments but were enhanced by grinding treatment, compared with the cracks on the as-received surface. The cracking severity was also enhanced by increasing the externally applied stress. The accelerated dissolution of Cr and the local tensile stress concentration in the near-surface layer caused by cold-working and higher applied stress reduced the SCC-resistance of Alloy 690TT in the studied solution.
关键词:
Alloy 690TT;Surface state;Applied stress;Stress corrosion cracking;environmentally assisted cracking;short-circuit diffusion;high-temperature water;chromium depletion;pressurized-water;steam;initiation;oxidation;mechanism;nickel
Journal of Alloys and Compounds
La1-xSrxCrO3 (x=0.0 similar to 0.5) samples were prepared by the sol-gel method. The crystal structures of La1-xSrxCrO3 at room temperature all are of the othorhombic perovskite GdFeO3-type. XPS analysis indicates that chromium ions are in mixed valence state. The introduction of Sr2+ into the lattice is compensated by the oxidation from Cr3+ to Cr6+ With x increasing, the amount of Cr6+ increases. The presence of the Cr6- is one of the key factors that affect the electric conductivity of La1-xSrxCrO3. (C) 2000 Elsevier Science S.A. All rights reserved.
关键词:
rare earth;perovskite La1-xSrxCrO3;high-temperature conductivity;interconnector;XPS
Wear
This paper presents the results of a series of tests under liquid-solid erosion conditions using a modified rotating disk rig. The aim of the study was to assess the effect of the sea mud of Zhoushan area in China on erosion-corrosion behaviors of carbon steel and low alloy steel under laboratory conditions. The results showed that the critical flow velocity for 3C carbon steel and 10CrMoAl low alloy steel in 2.4% NaCl solution without sea mud was 3 and 4 m/s, respectively. With the increasing of sea mud (6.6 mu m) content, the erosion-corrosion rate of test steels decreased. In contrast, if silica sand (38 mu m) was used, the erosion-corrosion rate increased with the increasing of sand content. The possible reasons for the abnormal phenomenon were discussed. Hence, it should be very careful if the rotating disk rig is used to do the erosion-corrosion experiment with very fine sea mud. Corrosion played a dominant role for material removal in sea mud containing solutions under the erosion-corrosion condition and the erosion effect of the sea mud was not significant. Therefore, how to improve the corrosion resistance rather than erosion resistance of materials is the key to prolong the lifetime of flow-handling components operated in the sea of Zhoushan area in China. (c) 2007 Elsevier B.V. All rights reserved.
关键词:
erosion-corrosion;carbon steel;low alloy steel;2.4% NaCl solution;sea mud;rotating disk rig;slurry erosion;n80 steel;size;performances;sand
