K.M.K. Srivatsa
材料科学技术（英文）
Hexagonally well-faceted microcrystals of ZnO have been grown by thermal evaporation of Zn powder in oxygen ambient at 700 °C under atmospheric pressure. It has been observed that the properties (size and quality) of ZnO microcrystals have a strong dependence on the reactor temperature at which the oxygen gas is admitted into the growth zone. The microcrystals grown with oxygen admittance at 450 °C have a length of 1 ¹m and a diameter of 0.75 μm while that grown with oxygen admittance at 600 °C have a length of 1.5-2 μm and a diameter of 1 μm. Room temperature photoluminescence spectra show a ultraviolet (UV) emission peak at 385 nm with a green band emission at around 500 nm. The UV-to-green band emission ratio for the microcrystals grown with oxygen admittance at 450 °C is observed to be 1.25 and the ratio decreases to 0.45 for the sample grown with oxygen admittance at 600 °C.
关键词:
ZnO microcrystals
K.M.K. Srivatsa
材料科学技术（英文）
High density ZnO nanorods were grown by thermal evaporation of Zn powder at 700°C on Si (100) and sapphire (0001) substrates at atmospheric pressure without adding any catalyst. The nanorods were characterizated in terms of their structural and optical properties. The nanorods grown on Si have a diameter of 350-400 nm and a length of 1.2 μm while those on sapphire have a diameter of 600-800 nm and a length of 2.5 μm. During the structural characterization, it is noticed that the rods grow along the (0002) plane with perfect hexagonal facet. The room temperature photoluminescence spectrum showed a strong UV emission peak at 385 nm with a weak green band emission, which confirms that nanorods have good optical properties. It is observed that the oxygen partial pressure plays an important role to control the shape and size of the nanorods in thermal evaporation growth technique.
关键词:
Thermal evaporation technique
K.M.K. Srivatsa
材料科学技术（英文）
Anatase titania nanostructures have been synthesized at room temperature by plasma enhanced chemical vapor deposition (PECVD) process on silicon (100) substrates using titanium tetraisopropoxide [Ti(OC3H7)4, TTIP] vapor, argon and oxygen mixtures under various deposition pressures. The deposited titania has been characterized for its structural, morphological and chemical composition by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray (EDX) spectroscopy and Fourier transform infrared (FTIR) spectroscopy recordings. With the variation of deposition pressure, titania assumes various nanostructures viz. nanocrystals, nanoparticles, noanorods and comb-like structure. EDX and FTIR measurements show that the deposited titania is of high chemical purity. The possible growth mechanisms for the observed titania nanostructures have been discussed.
关键词:
Nanostructures
刘勤
,
夏锄
,
刘晓东
金属学报
在170,190,210,230,250℃的温度下,采用3.7×10~2,7.4×10~2和1.1×10~(-1)min(-1)的应变速率(平均)对Zn-5%Al共晶合金的m-C-δ(或m-k-δ)关系曲线(简称m-δ关系曲线)进行了测定.所有的曲线均随应变的δ增加而快速上升.俟达到某一定的应变量(极限应变量δ1)后。开始缓慢下降并保持平稳直至断裂.Zn-5%A1共晶合金的m-δ关系曲线不存在k_(?)=k_I(k_(I 1),k_(I 2),k_(I 3),……)=k_F(或C_0=C_I(C_(I 1),C_(I 2),C_(I 3),……)=C_F=1)的简单情况.可应用m-δ方程式[4,5]对曲线上各点C值(包括所有的C_I和C_F值)进行计算.C值随δ值的增加成近似的直线上升.直线的斜率在极限应变(δ1)处突然减小.
关键词:
Materials Letters
Secondary M,C precipitation was investigated in K40S cobalt-base alloy after 100 h aging at 950 degreesC. The results showed that it was closely related to the tungsten-rich zones inherited from the as-cast condition and the degeneration of the primary M7C3 carbide. A direct element reaction, 6M + C --> M6C, in which C comes from the decomposition of the M7C3 carbides, is suggested as the mechanism of secondary M6C precipitation in K40S alloy. (C) 2001 Elsevier Science B.V. All rights reserved.
关键词:
M6C precipitation;aging;M7C3 carbide;superalloy
Ying LI
材料科学技术（英文）
Oxide materials NaCo2O4 and (Na1-yMy)1.6Co2O4 (M=K, 0.05≤y≤0.35; M=Ca, Sr, 0.10≤y≤0.40) were prepared by a sol-gel method. Experimental results indicated that the Seebeck coefficient and the Power-factor of Na Co2O4 were improved by doping Ca and Sr but not by K. The Power-factor of NaCo2O4 is in its maximum, 1.68×10-4 W•m-1•K-2 and 11% bigger than that of the original one when the dopant fraction of Ca was 0.1. Doping Sr makes NaCo2O4 have the biggest Power-factor, 1.68×10-4 W•m-1•K-2 that is 50% bigger than the non-doping oxide. The experimental results indicate that suitable dopants and addition amounts could improve the thermoelectric properties of NaCo2O4 greatly.
关键词:
Thermoelectric materials
,
materials
,
Electric
,
proper
胡标
,
尹明
,
王庆平
,
闵凡飞
,
杜勇
兵器材料科学与工程
基于文献报道的实验数据,采用相图计算(CALPHAD:CALculation of PHAse Diagrams)方法对V-M(M=Li,Na,K,Sc,Ag)5个二元系进行相图热力学研究.通过热力学优化计算获得了一套描述液相、(V)、(Li)、(Na)、(K)、(αSc)、(βSc)和(Ag)相的热力学参数.V-Li、V-Na和V-K体系中的气相视为由组元V、Li、Li2、Na、Na2、K和K2混合的理想气体.与实验相图数据对比表明,获得的热力学参数能够准确地描述实验相平衡数据.
关键词:
V-M(M=Li,Na,K,Sc,Ag)
,
CALPHAD方法
,
相图
,
热力学模型
Journal of Alloys and Compounds
Magnetization measurements on lead- or tin-doped YBa2Cu3O7 have been performed at 4.2 K in magnetic fields up to 29 T. The critical current densities are deduced from the irreversible magnetization and the pinning forces are evaluated. The effect of both lead and tin doping on the critical current density is quite appreciable. In particular, the critical current density of the sample doped with lead is more than twice that of the undoped sample. This effect is thought to be associated with the enhancement of the intergranular coupling of grains through the formation of BaPbO3 phase at the interface of the 123 superconducting phase. The relationship between the critical current density and a micrograph of the tin-doped sample is also discussed.
关键词:
transport critical current;y1ba2cu3ox
Journal of Magnetism and Magnetic Materials
The electron paramagnetic resonance g factors g(parallel to) and g(perpendicular to) for the trigonal Er3+-V-K centers (where V-K denotes K+ vacancy) in KMF3 (M = Mg and Zn) are theoretically investigated from the perturbation formulas of the g factors for a 4f(11) ion in trigonal symmetry. In these formulas, the contributions to the g factors from the second-order perturbation terms and the admixture of various energy levels are taken into account. In the above trigonal centers, the impurity Er3+ resides in the octahedral M2+ site of both crystals, associated with one V-K in the C-3-axis due to charge compensation. By analyzing their g factors, we find that the impurity Er3+ in both centers would move towards the V-K by an amount DeltaZ along the C-3-axis due to electrostatic attraction. The calculated g factors for the Er3+ centers based on the above displacements DeltaZ show good agreement with the observed values. The validity of the results is discussed. (C) 2004 Elsevier B.V. All rights reserved.
关键词:
electron paramagnetic resonance (EPR);defects and impurities;crystal-field and spin hamiltonians;Er3+;KMF3;(M = Mg and Zn);crystal-field;superposition-model;perovskite kmgf3;conversion;parameters;fluorides;kznf3
