何静
,
JIANG Wei-Hui
,
江伟辉
,
于云
,
宋力昕
,
胡行方
无机材料学报
doi:10.3321/j.issn:1000-324X.2005.03.032
采用溶胶-凝胶法制备了不同Si/Ti比的TiO2-SiO2双组分膜.用紫外光照射亚甲基蓝的分解实验比较薄膜的光催化性能.通过XRD、FTIR、HRTEM、FE-SEM、AFM以及UV-VS-NIR分光光度计等分析手段对薄膜的结构和光学性能进行了表征.结果表明:适量SiO2的引入,显著提高了TiO2薄膜的光催化活性,Si/Ti比为0.2时薄膜的光催化活性为最佳.SiO2引入TiO2薄膜后,生成了Ti-O-Si玻璃相和无定形SiO2,这两种物相聚集在TiO2晶界周围,有效地阻止了TiO2的晶粒长大,提高了锐钛矿相向金红石相的转变温度,使复合薄膜经过500C热处理后,只有锐钛矿相存在,有利于薄膜的光催化活性的提高.
关键词:
TiO2-SiO2薄膜
,
双组分
,
溶胶-凝胶法
,
光催化性能
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
周萧明
,
胡更开
复合材料学报
doi:10.3321/j.issn:1000-3851.2004.06.026
提出了预测复合材料非线性电位移和电场强度关系的一种解析方法,该方法基于各向材料的割线介电常数,将非线性问题转化成一系列线性问题来求解.该方法适用于任意各向异性复合材料和组分材料的非线性性质,而常用的Stroud和Hui的模型只适用于各向同性复合材料和组分材料的弱线性.证明了本文方法具有Ponte Castaneda提出的变分结构.计算结果表明,当基体非线性较小时,本文模型的预测与Stroud和Hui的模型一致,但当基体非线性系数增大时,本文模型能给出合理的预测结果,而Stroud和Hui的模型则会超出基体和夹杂的性能范围.
关键词:
复合材料
,
介电常数
,
非线性
,
割线方法
X.B. Tian
,
X.F. Wang
,
A.G. Liu
,
L.P. Wang
,
S. Y. Wang
,
B. Y. Tang and P. K. Chu 1)Advanced Welding Production & Technology National Key Laboratory
,
Harbin Institute of Technology
,
Harbin 150001
,
China 2)Department of Physics & Materials Science
,
City University of Hong Kong
,
China
金属学报(英文版)
The research on plasma immersion ion implantation has been conducted for a little over ten years. Much is needed to investigate including processing technlogy, plasma sheath dynamics, interaction of plasma and surface, etc. Of the processing methods elavated temperature technique is usually used in PIII to produce a thick modified layer by means of the thermal diffusion. Meanwhile plasma ion heating is more recently developed by Ronghua Wei et al[1]. Therefore the temeperature is a critical parameter in plasma ion processing. In this paper we present the theoretical model and analysize the effect of imlantation voltage, plasma density, ion mass,etc on the temperature rise.
关键词:
plasma immersion ion implantation
,
null
,
null
夏小建
量子电子学报
doi:10.3969/j.issn.1007-5461.2009.06.010
采用Wei-Norman方法,求出含时变电压源的介观LC电路随时间演化的精确解,应用相空间准概率分布函数,研究了时变电源作用下介观LC电路相干态的量子特性,结果表明此函数是一个二维运动的Gauss波包,其中心电量和磁通呈余弦和正弦变化.
关键词:
量子光学
,
LC回路
,
介观电路
,
相干态
,
量子态演化
,
相空间的准概率分布函数
倪永中
,
徐鸿
材料科学与工程学报
本文提出了一种基于粒子群算法和有限元方法的弹塑性本构方程参数的确定方法,并在此基础上开发了参数自动优化系统CMPI(Constitutive Material Parameter Identification).通过使最小二乘形式的目标函数达到极小值,实现参数的动态寻优;模型参数作为粒子群优化模块的输入,采用应变(应力)控制方法,调用材料非线性有限元模块计算特定参数时的应力(应变)响应,并计算与实验数据的误差,从而实现优化过程.CMPI目前适用于A-F类模型(Chaboehe、Ohno-Wang、Jiang-Sehitoglu)的参数优化,以此为基础,不难扩展到其他材料模型.
关键词:
粒子群
,
材料非线性
,
有限元
,
Ohno-Wang 模型
WEI Jihe Xi'an Institute of Metallurgy and Construction Engineering
,
China.
材料科学技术（英文）
The oxidation of alloying elements during the ESR of stainless steel has been studied. The model previously developed by WEI and Mitchell for the chemical reactions and mass transfer processes during ESR was applied to the remelting of the high Cr steel 1Cr18Ni9(Ti).The laboratory data for the unsteady state A.C.ESR were analyzed and dealt with by the model.When the remelting process reached a steady state,an oxidant(Fe_2O_3 powder)or a deoxidant(Ca-Si powder or metallic Ca)was added to the slag bath.The results showed that this model is applicable to the remelting of stainless steel rather precisely, and it is expected that the model may offer a reliable basis for the control of composition during practical ESR of high alloy steel. Also,the oxidation of Cr in the steel must be noticed when its content is high;but it is entirely possible to adjust the Cr content of ingot within a considerable range,using a special technique by means of the slag-metal reactions during the remelting.
关键词:
ESR
,
null
,
null
,
null
,
null
张剑
,
周储伟
,
雷笑
,
叶见曙
,
卓家寿
复合材料学报
对于混杂CFRP/GFRP筋高性能混凝土(HPC)梁,研究一种新的三维非线性梁壳组合单元,对HPC梁进行了全过程分析.引入实体退化壳单元理论,利用空间梁单元模拟预应力CFRP筋,并根据CFRP筋单元节点线位移和转角位移的协调性,推导CFRP筋单元对梁壳组合单元刚度矩阵的贡献,同时对GFRP筋和HPC梁采用分层壳单元模拟.并运用Jiang屈服准则、Madrid强化准则等描述混凝土的材料非线性,提出一种新的非线性梁壳组合单元,研制相应的三维非线性计算程序.计算结果与试验数据吻合良好,说明本文构造的非线性梁壳组合单元的正确性和研制程序的可靠性,以及混凝土材料非线性描述的合理性;采用组合单元能准确模拟CFRP筋的几何构形,能综合考虑其拉压弯剪性能,利于全面地反映配筋对结构的增强作用.
关键词:
CFRP筋
,
GFRP筋
,
梁壳组合单元
,
HPC梁
,
材料非线性
