HUANG Zhu-cheng
,
WU Kai
,
HU Bing
,
PENG Hu
,
JIANG Tao
钢铁研究学报(英文版)
The microwave heating characteristics of the mixture with oxidized pellet and coal was studied, and the non-isothermal reduction dynamics is discussed. The results show that, the slow-heating stage of the temperature rising process can be segmented into two heating temperature curves approximately that have good linear relationship. They can be seen as temperature programming. In the first stage, between 827 and 1073 K, the reaction mechanism obeys diffusion controlled model. In the second stage, between 1093 and 1323 K, the reaction mechanism also obeys diffusion controlled model. The apparent activation energies are found to be 7513 kJ/mol for the first stage and 5317 kJ/mol for the second stage. That is lower than the apparent activation energy under conventional heating. The microstructure of the reduced pellets shows that microwave can improve the kinetics of the reduction. Microwave has anxo-action to the reaction obviously.
关键词:
microwave
,
oxidized pellet
,
non-isothermal kinetics
LONG Hongming
,
FAN Xiaohui
,
JIANG Tao
,
DAI Linqing
钢铁研究学报(英文版)
An expert system skeleton tool of sintering process was constructed using objectoriented method, which can actualize two functions, ie, the shell function and the program function. The skeleton tool offered a platform to build a prototype system, to program class code, and to develop the expert system. Four branch expert systems were developed using the skeleton tool including the control of chemical composition, the control of sintering process state, the control of expended energy, and the diagnosis of abnormity. It is found that the performance of all systems is satisfactory in practice.
关键词:
sintering process;expert system;skeleton tool;knowledge base;illation engine
FAN Jian-jun
,
QIU Guan-zhou
,
JIANG Tao
,
GUO Yu-feng
,
CAI Mei-xia
钢铁研究学报(英文版)
Investigation was conducted on roasting properties of pellets with an iron concentrate of complex mineral composition. The results indicated that the pellets of complex mineral composition concentrate required higher preheating temperature and longer preheating time than that of single magnetite concentrate. Therefore, it is difficult for preheated pellets to withstand the mechanical collision in the roasting process in rotary kiln. It was found that after the iron concentrate being subjected to high pressure roll grinding, the specific surface area reached 2029.1 cm2/g. Consequently, the preheating and roasting temperature of pellets were decreased by 70 and 50 ℃ and preheating and roasting time were decreased by 2 and 4 min, respectively. Meanwhile, the compression strength of preheated and roasted pellets were increased by 200 N for a pellet and 220 N for a pellet, respectively. The mechanism lied in that the increase of specific surface area activated thermal reaction and promoted formation of iter-grain bridge.
关键词:
pellet
,
iron concentrate
,
high pressure roll grinding (HPRG)
,
specific surface area
HAN Gui-hong
,
JIANG Tao
,
ZHANG Yuan-bo
,
HUANG Yan-fang
,
LI Guang-hui
钢铁研究学报(英文版)
By means of isothermal oxidation and chemical analysis, great importance was attached to the parameters that made effects on the oxidation degree of vanadium, titanium-bearing magnetite pellet in high-temperature processing (1073-1323 K). Based on the experimental data, oxidation kinetics of pellet was analyzed according to shrinking unreacted-core model subsequently. Experiment results display that the oxidation degree of pellet increases with increasing of oxidation time, oxidation temperature and oxygen content, as well as shrinking of pellet diameter. Under the condition of oxidation time 20 min, oxidation temperature 1223 K, oxygen content 15%, and pellet diameter 12 mm, oxidation degree of pellet reaches 92.92%. The analysis of oxidation kinetics indicates that oxidation process of pellet is controlled by chemical reaction with activation energy 68.64 kJ/mol at a relatively lower temperature (1073-1173 K). Oxidation process of pellet is mixed-controlled by chemistry reaction and diffusion with activation energy 39.66 kJ/mol in the temperature range of 1173-1273 K. When oxidation temperature is higher than 1273 K, the limited link of oxidation reaction is the diffusion control with the activation energy 20.85 kJ/mol. These results can serve as a reference to the production of vanadium, titanium-bearing magnetite pellet.
关键词:
vanadium
,
titanium-bearing magnetite
,
oxidation degree
,
pellet
,
shrinking unreacted-core model
,
oxidation kinetics
刘文鹏
,
张庆礼
,
杨华军
,
周鹏宇
,
孙敦陆
,
高进云
,
谷长江
,
罗建乔
,
王迪
,
殷绍唐
量子电子学报
doi:10.3969/j.issn.1007-5461.2011.02.018
采用固相反应法制备了Bi3+、Eu3+、Tb3+掺杂的Lu3TaO7.测量了样品的X射线衍射谱、激发和发射光谱及荧光衰减曲线.三种离子掺杂的Lu3TaO7均呈现出强的荧光发射,其中Bi3+具有峰位在431 nm处的一强发射宽带,衰减寿命为16.8μs,Eu3+、Tb3+则表现出稀土离子的特征锐发射峰,衰减寿命分别为1.26 ms和1.20 ms.因此,它们均是具有潜在应用前景的重闪烁体材料.
关键词:
材料
,
闪烁体
,
Lu3TaO7
,
发光
季振国
,
周荣福
,
毛启楠
,
霍丽娟
,
曹虹
无机材料学报
doi:10.3724/SP.J.1077.2009.09217
利用反应磁控溅射法制备了半导体锡锑氧化物薄膜 (TAO). 根据霍尔效应测试结果,当Sn/Sb 原子比处于0.22~0.33范围内时,TAO薄膜是p型导电的,在此范围之外,TAO薄膜是n型导电的. 光学带隙测量结果表明,不同Sn/Sb比的TAO薄膜的禁带宽度基本相同(～3.9eV).构造了一个全透明的PN结,其中n区为Sn/Sb原子比为0.5的TAO薄膜, p区为Sn/Sb原子比为0.33的TAO薄膜.n区TAO的电极用铟锡氧化物(ITO),p区TAO的电极用Cu薄膜.实验结果表明,由于两种导电类型的TAO薄膜具有相同的禁带宽度,上述透明PN结构具有典型的准同质PN结的整流特性.
关键词:
透明半导体薄膜
,
锡锑氧化物
,
PN结
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
