欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(45)
  • 图书()
  • 专利()
  • 新闻()

A New Type of Submerged-Arc Flux-Cored Wire Used for Hardfacing Continuous Casting Rolls

YANG Ke , ZHANG Zhi-xi , HU Wang-qin , BAO Ye-feng , JIANG Yong-feng

钢铁研究学报(英文版)

It is expected that the welding hardfacing of continuous casting rolls has better welding performance and higher wear resistance. A new type of submerged-arc hardfacing flux-cored wire has been developed through nitrogen replacing part of carbon and addition of the nitrogen-fixing elements of niobium and titanium. And microstructure, degree of hardness and high-temperature wear resistance of its deposited metal samples were also investigated. It is found that the microstructure is martensite, residual austenite and carbonitride precipitates. As a result, the hardfacing metal with homogeneous distribution of very fine carbonitride particles had high hardness and excellent wear-resisting property during high-temperature wear, which could significantly extend the service life of continuous casting rolls.

关键词: submerged-arc flux-cored wire , hardfacing , high-temperature wear resistance , continuous casting roll

Two-step magnetization in a spin-chain system on the triangular lattice: Wang-Landau simulation

Physical Review B

The Wang-Landau algorithm is used to study the thermodynamic and magnetic properties of triangular spin-chain system based on two-dimensional Ising model in order to understand the magnetic-order dynamics in Ca(3)Co(2)O(6) compound. The calculated results demonstrate that the equilibrium state of the rigid spins produces the two-step magnetization curve at low temperature even when the random-exchange term is considered. This work indicates that the four-step magnetization behavior observed experimentally must be due to the nonequilibrium magnetization.

关键词: calcium compounds;exchange interactions (electron);Ising model;magnetisation;thermodynamics;one-dimensional ca3co2o6;density-of-states;compound ca3co2o6;phase-diagram;proteins;crystal

116HU聚酯亚胺无挥发浸渍树脂的性能及其在风电上的模拟结构试验

王君 , 邹家桂 , 陈政标 , 高建武 , 刘彦坤 , 张杰元 , 宋莎

绝缘材料

  为解决苯乙烯和甲基苯乙烯在VPI浸渍树脂应用于风力发电机中的不足,采用不饱和聚酯亚胺、引发剂和无挥发活性稀释剂研制出116HU聚酯亚胺无挥发浸渍树脂,并对其各项性能进行了研究。结果表明:116HU聚酯亚胺无挥发浸渍树脂的常规性能满足风力发电机的要求,其耐热等级可达H级。用该树脂浸渍的风电模拟线棒具有优异的介电性能、耐湿热交变和高低温循环冲击性能及耐盐雾性能等,能满足风力发电机在极端环境运行的要求。

关键词: 聚酯亚胺 , 无挥发 , VPI , 风力发电机 , 耐湿热 , 耐盐雾

Reply to "Comment on 'Low-temperature lattice excitation of icosahedral Al-Mn-Pd quasicrystals' "

Physical Review B

In response to the comment by Wang and Qin, we have rewritten our equation (22) following the coordinate system of Dina, et al. [J. Wuhan Univ. (Nature Science Edition) 3, 23 (1992)]. According to the thermodynamic stability condition and the experiment of Capitan et al., we have chosen the new parameters of the phason elastic constants. Based on this, we have recalculated the coefficients of the expressions on the vibrational denty of states and the specific heat of the icosahedral Al-Nin-Pd quasicrystal. Our results are still in agreement with the experimental data measured by Walti et al. [Phys. Rev. B 57, 10 504 (1998)]. It demonstrates that our method is useful for dealing with the low-temperature vibrational excitation of icosahedral quasicrystals.

关键词: quasi-crystals;diffuse-scattering

天然气井油管悬挂器腐蚀失效分析

刘守平 , 周上祺 , 王佳眉 , 任勤

腐蚀学报(英文)

用金相显微镜、扫描电镜、X射线衍射仪和X射线能谱仪对天然气井油管悬挂器腐蚀失效进行了检测分析,并对天然气井油管悬挂器用35CrMo钢进行了盐雾试验,结果表明,天然气中的水和CO2是引起腐蚀的主要介质,腐蚀产物主要是FeCO3,高速天然气冲刷和钢中的非金属夹杂加剧了腐蚀的速度. CORROSION FAILURE ANALYSIS OF AN OIL TUBE USED IN NATURAL GAS WELL LIU Shou-ping,ZHOU Shang-qi,WANG Jia-mei,REN Qin Chongqing University A failed oil tube used in natural gas well was examined by optical microscope,scanning electron microscope ,X-ray diffractometer and X-ray spectrometer.Corrosion behavior of 35CrMo steel samples of the oil tube were investigated by means of salt spray tests in the laboratory.The results show that CO2 and H2O are primary factors in the corrosion of oil tube.The corrosion product is FeCO3,non-metallic inclusions in the steel and erosion of natural gas fluid played an important role in accelerating the corrosion. oil tube; natural gas well; 35CrMo steel; failure analysis; corrosion

关键词: 悬挂器 , null , null , null

Ion sputter erosion in metallic glass-A response to "Comment on: Homogeneity of Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass" by L-Y. Chen, Y-W. Zeng, Q-P. Cao, B-J. Park, Y-M. Chen, K. Hono, U. Vainio, Z-L. Zhang, U. Kaiser, X-D. Wang, and J-Z Jiang J. Mater. Res. 24, 3116 (2009)

Journal of Materials Research

The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.

关键词: room-temperature

SAR图像目标识别新方法

王丽 , 魏巍 , 吴林钢 , 王灿进

液晶与显示 doi:10.3788/YJYXS20142903.0429

提出一种SAR图像目标识别新方法.首次引入BM3D方法,用于滤除原始图像中的相干斑噪声,BM3D结合了空间域和变换域去噪的优势,滤波性能优异.在特征提取步骤,将低阶Hu矩与高阶Zernike矩组合,Hu矩描述目标的粗略信息,高阶Zernike矩描述目标的细节信息,因此组合矩能够更加全面而细致地表达目标特性.使用组合矩特征训练SVM分类器,对含噪的SAR图像进行识别实验.实验结果表明:本文方法的识别率高达98.90%,优于已有的SAR目标识别方法.

关键词: SAR图像 , 目标识别 , BM3D滤波 , 组合矩

硝酸羟胺的热稳定性评估及热分解机理研究

刘建国 , 安振涛 , 张倩 , 杜仕国 , 姚凯 , 王金

材料导报 doi:10.11896/j.issn.1005-023X.2017.04.030

为评估氧化剂硝酸羟胺的热稳定性,使用标准液体铝皿于3 K/min、4 K/min、5 K/min加热速率下进行热分析.借助非等温DSC曲线的参数值,应用Kissinger法和Ozawa法求得热分解反应的表观活化能和指前因子,根据Zhang-Hu-Xie-Li公式、Hu-Yang-Liang-Xie公式、Hu-Zhao-Gao公式以及Zhao-Hu-Gao公式,计算硝酸羟胺的自加速分解温度和热爆炸临界温度,并对热分解机理函数进行了研究.设计了7条热分解反应路径,采用密度泛函理论B3LYP/6-311++G(d,p)方法对硝酸羟胺的热分解进行了动力学和热力学计算.计算结果表明,硝酸羟胺热分解的自加速分解温度TsADT=370.05 K,热爆炸临界温度Te0=388.68K,Tbp0=397.54 K,热分解最可几机理函数的微分形式为f(a) =17×(1-α)18/17.硝酸羟胺热分解各路径中,动力学优先支持路径Path 6、Path 5、Path 4和Path 1生成NO和NO2,其次是Path 2、Path 7和Path 3生成N2和N2O.温度在373 K以下时,Path 1'反应无法自发进行,硝酸羟胺无法进行自发的热分解.从热力学的角度来看,硝酸羟胺在370.05K以下储存是安全的.

关键词: 硝酸羟胺 , 热分析 , 热稳定性 , 热分解机理 , 密度泛函理论

Effect of interstitial hydrogen on cohesive strength of Al grain boundary with Mg segregation

材料科学技术(英文)

The effect of interstitial hydrogen on the cohesion of the Al Sigma=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.

关键词: hydrogen;grain boundary;Al-Mg alloys;pseudopotentials;1st-principles

Effect of Interstitial Hydrogen on Cohesive Strength of Al Grain Boundary with Mg Segregation

Xiaoguang LIU , Xiaowei WANG

材料科学技术(英文)

The effect of interstitial hydrogen on the cohesion of the Al ∑=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.

关键词: Hydrogen , null , null

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共5页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词