LI Yu-gui
,
YE Quan
,
FAN Fei
,
BAO Ye
,
HUANG Qing-xue
钢铁研究学报(英文版)
Blade clearance is an important technical parameter of the shear, which determines the shear quality of plate. The finite element method was used to simulate shearing process which is in the different specifications and blade clearances, and the impact on blade section and shearing force of blade clearance was analyzed. Comparing with traditional experience formulas and measured values, the limitations of the experience formulas were proved. And by contrasting with the shearing force data collected from Linfen Iron and Steel Company, the reliability of the finite element method was further proved. The simulated results show that the simulated values controlled by ductile fracture criterion and measured values are very close, and the deviation value is in the range of 4.8%-20.8%. For the same steel, if the plate is thicker, the blade clearance will be greater, and thickness and blade clearance are approximately linear. The difference between numerical simulation of the maximum shearing force and the measured results is 7.7% to 12.0%, and the simulation results are close to facts. With the increase of blade clearance and the thickness, the shearing force was increased to some degree.
关键词:
blade clearance
,
finite element method
,
experience formula
,
shearing section
,
shearing force
Superconductor Science & Technology
In this paper we report the transport properties of c-axis-oriented superconducting La(1.44)Nd(0.4)Sr(0.16)CuO(4) films on LaSrAlO(4) substrates with different thicknesses in various magnetic fields parallel and perpendicular to the c axis of the films. It is found that with decreasing film thickness there is a crossover from the parallel shift to fan-shape broadening in the resistive transitions. Moreover, for both field configurations, the flux pinning potential U(0)(H) of the film shifts upward with an order of magnitude with increasing in-plane compressive strain. These results indicate that the compressive epitaxial strain and strain-induced destabilization of the static charge stripes are important aspects for the promotion of superconducting transition temperature as well as the flux pinning potential.
关键词:
high-temperature superconductors;crystal thin-films;flux motion;la2-xsrxcuo4;strain;insulator;dependence;behavior
JIANG Qichuan LI Zhang WANG Shoushi HE Zhenming Jilin University of Technology
,
Changchun
,
China
金属学报(英文版)
The majority of Ti is found to be preferentially precipitated in the form of TiC from medium manganese steel melt.The TiC may contribute to the heterogeneous nuclei of fine austenite crystallization,to the retardation of dislocation movement as well as to pile-up and proliferate the dislocations,thus,the matrix of the as-cast steel will be effectively strength- ened.It was also found that the TiC can be acted as the heterogeneous nuclei of the nodular eutectic carbide formation and caused the dispersion o fan abundance of the carbide in the interstices between austenite dendrite arms.
关键词:
TiC
,
null
,
null
D.R.Huang
,
T.F.Ying
,
L.T.Kuo
,
S.J.Wang
,
H.C.Huang
,
C. Y.Huang
材料科学技术（英文）
A single phase brushless spindle motor with innovative design has been developed for application in a DVD drive. The methods used to reduce the cogging torque and to improve the dynamic performance of this new design motor are proposed in this paper. The single phase brushless spindle motor is usually applied for cooling fan, pump and blower before the performance is improved by the reengineering process. The stator configuration and the drive circuit have been remodeled in order to meet the requirements of the spindle motor used in the DVD applications.
关键词:
Xiang XUE
,
Zhiliang NING
,
Bide ZHOU
,
Chunhui ZHANG
材料科学技术（英文）
In this study, the Solidworks was used as pre-processor, which performed the three- dimensional solid construction and automatic enmeshment. The COSMOS was adopted as post- processor to display the temperature distribution and further to simulate the thermal stress distribution of dies. A software package for three-dimensional temperature fields of complicated die casting and its dies was developed and the temperature distributions of a fan cover casting were simulated by the software.
关键词:
陈云传
,
刘晓亚
,
熊万斌
,
陈明清
,
李华伟
材料保护
doi:10.3969/j.issn.1001-1560.2003.11.008
以酚醛型环氧树脂为原料,合成出低粘度环氧丙烯酸酯(EA)树酯,讨论了环氧树脂类型、催化剂用量等因素对反应及产物性能的影响,并用柔性单体--己内酯改性丙烯酸酯(FAn)替代通常的单官能度单体,对树脂产物进行了涂料配方的研究.
关键词:
紫外光(UV)固化
,
罩光涂料
,
环氧丙烯酸树脂
,
应用
Journal of Physics D-Applied Physics
A large magnetoresistance (MR) is observed in a double helical CoMnSi compound over the entire temperature region from 5 K to the maximum measuring temperature of 380 K, with the largest MR ratio of -18.3% at 245 K and the smallest MR ratio of -5.5% at 85 K at 5 T. This phenomenon is ascribed to two different mechanisms in different temperature regions. The suppressed spin fluctuations of the double helical structure are responsible for the MR below 110 K. However, in consideration of the natural multilayer superstructure of CoMnSi, the larger MR above 110 K is ascribed to the decrease in K-space restrictions when the change in magnetic structure from double helical order to fan order occurs.
关键词:
giant magnetoresistance;magnetic-structure;crystal;metals
Haihua LIU
金属学报(英文版)
doi:10.1016/S1006-7191(08)60120-9
A novel method was reported to measure the remnant magnetic field in Lorentz mode in a FEI Tecnai F20 transmission electron microscope equipped with a Lorentz lens. The movement of the circle Bloch line of the cross-tie wall in Permalloy is used to measure the remnant magnetic field by tilting the specimen and adjusting the objective lens current. The remnant magnetic field is estimated to be about 17 Oe, in a direction opposite to that of the objective lens magnetic field. The remnant magnetic field can be compensated by adjusting the value of the objective lens current.
关键词:
Lorentz electron microscopy
,
Lorentz lens
,
remnant magnetic field
,
Permalloy
,
cross-tie walls
