欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(2431)
  • 图书()
  • 专利()
  • 新闻()

Mechanism of Metal Transfer in DE-GMAW

Kehai Li

材料科学技术(英文)

Modification of conventional gas metal arc welding (GMAW) process is of great potential to achieve high productivity with low cost and strong usability. Double-Electrode GMAW (DE-GMAW) is such a modified arc welding process which is formed by adding a bypass torch (gas tungsten arc welding torch) to a conventional GMAW system. The mechanism of metal transfer in DE-GMAW was proposed and verified in this paper. Experiments show that the critical current is decreased so that spray transfer can be obtained at a lower current level in DE-GMAW. Analysis of this significant change in metal transfer phenomena is conducted, and explanation is given out. It is found that the bypass arc in DE-GMAW lifts the anode point on the droplets such that the electromagnetic force becomes larger and squeezes the droplets so that spray transfer can take
place under welding current lower than that in conventional GMAW.

关键词: Metal transfer , null , null

两种组织的Ren80高温合金的蠕变裂纹扩展行为

孙坚 , 张源虎 , 胡赓祥

金属学报

研究了定向凝固和普通铸造的Ren80合金在1123K静载荷下的蠕变裂纹扩展行为结果表明,Ren80合金蠕变裂纹扩展速率,可用应力强度因子较好地关联定向凝固合金蠕变裂纹与扩展速率较低,其应力强度因子指数约为普通铸造合金的1/2

关键词: 高温合金 , directional solidification , stress intensity factor , creep crack propagation , null

PM René 95合金涡轮盘等温锻造工艺的模拟式设计

张麦仓 , 董建新 , 曾燕屏 , 谢锡善 , 罗子健

金属学报

利用热力耦合有限元程序FORMT,对PM René 95合金中等尺寸(外径尺寸约为630 mm)涡轮盘的等温锻造工艺进行了模拟式设计.结果表明,采用TZM钼基合金模具,在1050℃以接近10-3s.的应变速率进行闭式模锻和开式模锻,模具材料均能满足使用要求,且开式模锻设备最大载荷不超过31×103kN;采用K21合金模具,在1000℃以相同条件等温成形,模具材料因变形热效应及边界摩擦引起温升而失效且所需设备吨位相对较大.

关键词: PM , null , null , null

PM René 95合金涡轮盘等温锻造工艺的模拟式设计

张麦仓 , 董建新 , 曾燕屏 , 谢锡善 , 罗子健

金属学报 doi:10.3321/j.issn:0412-1961.2002.10.022

利用热力耦合有限元程序FORMT,对PM René 95合金中等尺寸(外径尺寸约为630 mm)涡轮盘的等温锻造工艺进行了模拟式设计.结果表明,采用TZM钼基合金模具,在1050℃以接近10-3s.的应变速率进行闭式模锻和开式模锻,模具材料均能满足使用要求,且开式模锻设备最大载荷不超过31×103kN;采用K21合金模具,在1000℃以相同条件等温成形,模具材料因变形热效应及边界摩擦引起温升而失效且所需设备吨位相对较大.

关键词: PM René 95合金,等温锻造,热力耦合有限元,模拟式工艺设计

Properties of ZnO : Al films on polyester produced by de magnetron reactive sputtering

Materials Letters

High preferred (002) orientation Al-doped ZnO (ZAO) films have been prepared by de magnetron reactive sputtering of an alloy target (98.5 wt.% Zn-1.5 wt.% Al) onto polyester substrates. The structural, mechanical, electrical and optical properties were investigated. The ZAO film has a sheet resistance of as low as 47.5 Omega/square and an average visible transmittance of about 70%. An average IR reflectance of about 70% in the region of 2.5-25 mum also has been obtained. (C) 2001 Elsevier Science B.V. All rights reserved.

关键词: Al-doped ZnO (ZAO);polyester;mechanical;IR reflectance;thin-films;optical-properties;oxide-films;electrical-properties;rf;temperature;orientation;parameters;deposition;substrate

Formation of Al-doped ZnO films by de magnetron reactive sputtering

Materials Letters

Highly preferred (002) orientation transparent conductive Al-doped ZnO (ZAO) films were successfully prepared by de magnetron reactive sputtering from a Zn target mixed with Al of 2.0 wt.%. The film has a resistivity of 4.80 X 10(-4) n cm and a visible transmittance of as high as 90%. XPS analysis indicates Al-enrichment on the film surface. The asymmetry of Al 2p(3/2) XPS peak is resolved into two components: one centering at 72.14 eV attributed to metallic Al and the other having a binding energy of 74.17 eV due to oxidized Al. (C) 2001 Elsevier Science B.V. All rights reserved.

关键词: Al-doped;ZnO;XPS;Al-enrichment;oxide thin-films;optical-properties;electrical-properties;rf;dc;transparent;deposition

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共244页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词