LIU Xiong
,
DING Xing-ping
,
HE Yan-lin
,
et al
钢铁研究学报(英文版)
Aging treatments at the temperature range of 1000-1200 ℃ for different time intervals (10, 30, 60min) in a solution-treated 2205 duplex stainless steel(DSS) are carried out respectively. The migration of γ/α interface boundary after different ageing treatments is measured by optical metallography and calculated by DICTRA software. The agreement of the calculation and experimental results is satisfied. The migration of γ/α interface boundary with increased keeping time depends on the chemical potential of chromium in each phase. At the aging temperature of 1100℃, the back diffusion effect of chromium results in the opposite direction migration of γ/α interface, therefore, the ferrite volume fraction gets lower at first and then gets higher after 1800s diffusion
关键词:
杨文虎
,
易冉
,
徐阳
,
惠思思
,
曹晓珑
绝缘材料
doi:10.3969/j.issn.1009-9239.2012.01.014
研究了不同外施工频电压下环氧树脂绝缘中的电树枝结构、生长的特性,并用Ding等提出的模型解释了电树枝的发展过程,模拟了其生长曲线.结果表明:在同一电压下,环氧树脂中电树枝的生长速度基本为恒定值,随外施电压的升高,电树枝分枝变少,生长速度基本呈指数增加,且利用模型模拟的生长曲线与实验测试的结果吻合,最后讨论了模型的物理基础.
关键词:
电树枝
,
环氧树脂
,
劣化
,
动力学
,
模型
,
模拟
Journal of Physics-Condensed Matter
This research purposes to investigate the atomic and electronic structures of the Al/TiC(001) interface with lattice misfit using the ab initio pseudopotential approach. A detailed analysis of the relaxed atomic structure reveals that the atoms over the initial unfavourable sites relax to the favourable sites along the lateral plane. The properties of the semicoherent interface can be taken as averages over the different coherent sites. In addition, the interface atoms in relatively favourable regions are dragged near to the interface, while those in unfavourable regions are pushed away from the interface. Therefore, a large war-ping near the interface is made perpendicular to the lateral plane. The calculated adhesions explain the different wetting results from the viewpoint of structural transition. The subsequent analysis of electronic properties demonstrates that adhesions dominate mainly via the strong Al-C covalent bond.
关键词:
first-principles;1st principles;adhesion;surfaces;misfit;1st-principles;wettability;al
X. Q. Yang
,
L. X. Huo
,
Y. F. Zhang and J. X. Yan (School of Material Science and Engineering
,
Tianjin University
,
Tianjin 300072
,
China)
金属学报(英文版)
The buckling formation and influence factors during welding thin - plated structures were investigated based on finite element methods, An engineering treatment method for prdicating the buckling distor- tion was proposed in here. It was used the equivalent applied thermal - load to simulate the welding residual stress,therefore the calculation of complex welding distoriton can be transformed into 3D elas- tic structural applied- load analyses, which can reduce the quantities of calculating works effectively. The validation of the method was verified by comparison of the numerical simulation and experimental results. The simulation of buckling distorition for side - walled structrues of paseenger train was per- formed and the calculation was in agreement with measuring results in general. It was shown that the main factors for producing the buckling were the intermittent fillet and ping the during welding the stiffened beams and columns to the panel.The existence of the free edge of panels would reduce the crit- ical buckling stress and enlarge the deflection obviously,but the continuous weld in closed frames didn' t degrade the buckling situation.
关键词:
welding buckling distortion
,
null
,
null
陈伟亮
,
张宁
,
唐昭辉
,
丁学勇
材料研究学报
将Miedema模型与实验数据相结合得到适于Miedema模型的O和S的参数(O:电负性7.04、电子密度6.03、摩尔体积4.59;S:电负性5.8、电子密度3.24、摩尔体积6.97),计算了141种O的二元化合物和145种S的二元化合物生成焓其平均绝对误差(MAPE)分别为36.8％、32.4％.结合Ding导出的三元系相互作用系数计算模型,计算了1873 K时Fe基熔体中O和S与其它元素之间的相互作用系数.与实验数据的比较表明,除个别元素外,计算值与实验值之间误差不大且变化趋势比较一致.将误差较大的Nb、Ag、Pt的电负性参数由原来的4.05、4.35、5.65修正为4.31、4.17、5.57,使用Miedema模型的计算精度有很大的提高.
关键词:
材料科学基础学科
,
Miedema模型
,
含O和S熔体与合金
,
相互作用系数
,
参数的修正
Z.L. Ding
,
Y.C. Fan
,
H.B. Qi
,
D.L. Ren
,
J.B. Guo and Z.Q. Jiang Shijiazhuang Railway Institute
,
Shijiazhuang 050043
,
China
金属学报(英文版)
The SiC_p/Al-alloy composite front broke rotors designed for SHANGHAI SANTANA cars were prepared by semi-solid stirring+liquid for ping process. The properties of the composite rotors were examined. The composite brake rotors were subjected to dynamometer tests on a SCHENCK broke testing system, referring to TLll0 standard of VOLKSWAGEN Company. The friction coefficient and thermal response during fade testing and the wear performance of the composite rotors were studied as the function of various parameters, such as braking pressures, initial speeds, initial temperatures, torque and decelerations, and compared with that of conventional cast iron rotors. The results showed that the properties of SiC_p,/Al-alloy composite rotors can achieve the requirements of commercial cast iron rotor.s. The results also suggested that the friction coefficients of composite rotors under different broking conditions are within the deviation band specified by the TLll0 standard, and the temperature rise of the composite rotors at the cud of each fade stop is lower than that of the cast iron rotors. The wear resistance of composite rotors was higher than that of cast iron rotors. The friction and wear mechanism are analyzed.
关键词:
SiC_p/Al-alloy composite
,
null
,
null
,
null
钱鹏
,
李兴华
量子电子学报
doi:10.3969/j.issn.1007-5461.2015.06.008
基于量子信道加密原理,结合Ping-Pong协议控制模式和信息模式的概念,提出了一个量子安全直接通信协议.在此协议中,发送者和接收者用n对Bell态作为量子信道,发送者用controlled-Not操作将单粒子纠缠入量子信道,接收者用controlled-Not操作将单粒子与量子信道解纠缠.通信双方依次执行控制模式和信息模式,控制模式检测窃听,信息模式发送秘密信息.控制模式和信息模式均不会对已建立的量子信道造成破坏,因此建立量子信道的过程仅需执行一次,此后通信双方可以反复进行控制模式和信息模式,从而不断进行窃听检测和秘密信息传输.
关键词:
量子光学
,
量子安全直接通信
,
信道加密
,
窃听检测
刘守平
,
周上祺
,
王佳眉
,
任勤
腐蚀科学与防护技术
用金相显微镜、扫描电镜、X射线衍射仪和X射线能谱仪对天然气井油管悬挂器腐蚀失效进行了检测分析，并对天然气井油管悬挂器用35CrMo钢进行了盐雾试验，结果表明，天然气中的水和CO2是引起腐蚀的主要介质，腐蚀产物主要是FeCO3，高速天然气冲刷和钢中的非金属夹杂加剧了腐蚀的速度.
CORROSION FAILURE ANALYSIS OF AN OIL TUBE USED IN NATURAL GAS WELL
LIU Shou-ping,ZHOU Shang-qi,WANG Jia-mei,REN Qin
Chongqing University
A failed oil tube used in natural gas well was examined by optical microscope,scanning electron microscope ,X-ray diffractometer and X-ray spectrometer.Corrosion behavior of 35CrMo steel samples of the oil tube were investigated by means of salt spray tests in the laboratory.The results show that CO2 and H2O are primary factors in the corrosion of oil tube.The corrosion product is FeCO3,non-metallic inclusions in the steel and erosion of natural gas fluid played an important role in accelerating the corrosion.
oil tube;
natural gas well；
35CrMo steel；
failure analysis；
corrosion
关键词:
悬挂器
,
null
,
null
,
null
但永平
,
彭红涛
,
王东云
,
刘芳华
液晶与显示
doi:10.3788/YJYXS20132801.0099
在图像处理中图像数据交换量大,图像数据传输是图像采集处理系统的关键环节.EDMA是DSP中用于实现数据快速交换的重要技术,具有独立于CPU的后台批量数据传输的能力.文章基于TI公司TMS320DM642芯片的图像采集处理系统,利用EDMA的数据传输方式实现视频数据信号高速实时传输.介绍了DSP的外部存储器接口与FPGA的FIFO存储器有机结合进行数据传输,分析了其设计的整体结构与逻辑控制的功能,并着重分析了基于EDMA Ping-Pong数据传输方式的原理及其应用.另外,EDMA中断服务程序调用CPU对已搬移完成的图像数据块进行处理,不仅提高了数据的传输效率,而且节约了CPU资源,使DSP的高性能得到了充分发挥,从而为视频信号处理的实时性奠定了基础.
关键词:
EDMA
,
DSP
,
FIFO
,
数据传输
,
Ping-Pong
