XU Yourong ZHANG Henghua CHEN Darning XIE Fuchun XU Mingyu Shanghai University of Science and Technology
,
Shanghai
,
ChinaCHEN Lanying SU Baorong QIAN Hongbin Shanghai Optics and Fine Mechinery Research Institute
,
Academia Sinica
,
Shanghai
,
China XU Yourong
,
professor
,
Department of Materials Science and Engineering
,
Shanghai University of Science and Technology
,
Shanghai 201800
,
China
金属学报(英文版)
Effect of laser scanning speed on phase constitution,microstructure,microhardness and wear resistance of laser-cladding hard facing alloy Stellite 12 has been investigated by means of a cross-flow-type CO_2 laser of 1.5 kW.The laser-cladding layer on the alloy consists of ma- trix phase of suppersaturated solid solution γ(Co,Cr)and complex hexagonal carbide M_7C_3.Under certain condition,at higher laser scanning speed,the suppersaturated solubility of elements increases in γ(Co,Cr),and the precipitation of the complex carbtde M_7C_3 de- creases,so the microhardness increases and the wear resistance decreases.But at slower laser scanning speed,more complex carbide M_7C_3 may precipitate,and the wear resistance may be improved.Therefore,it is believed that the principal factor in improving wear resistance is the precipitation of carbide M_7C_3,while increment of microhardness is the suppersaturated solu- bility of elements in matrix phase γ(Co,Cr).
关键词:
laser-cladding
,
null
,
null
,
null
MA Zongyi YAO Zhongkai Harbin Institute of Technology
,
Harbin
,
China
金属学报(英文版)
The SiC_w/Al composite prepared by squeeze casting has a combination of superior room temperature specific strength and modulus together with excellent thermal properties.The extrusion can make an improvement on the strength and ductility of the composite from 582 MPa as squeeze casted up to 639 MPa,and on the transformation from isotropic to the anisotropic structure.This seems to be explained by the orientation of whiskers and the densification of dislocations in matrix.TEM observation indicates that the stacking fault is the usual planar defect on the SiC_w surface. composite;;SiC whisker;;Al alloy;;microstructure
关键词:
composite
,
null
,
null
,
null
陆振华
,
许宝建
,
金庆辉
,
赵建龙
功能材料与器件学报
doi:10.3969/j.issn.1007-4252.2008.03.015
PDMS是制作微流控芯片的主要材料.PDMS芯片制作的主要方法是模塑法,模塑法要求有良好的塑性成型模具.SU-8以其良好的微加工特性,目前已广泛应用于微机械结构的制作,也用于PDMS塑性成型的模具.本文根据模具的特殊性,如平整、无裂纹、可多次使用等要求,研究了影响SU-8模具结构与基底材料硅片的黏附性和形成裂纹的因素,优化了SU-8微模具加工工艺,在以0.5℃/min进行升降温、210 mJ/cm2的曝光剂量、200℃条件下硬烘30min条件下得到较好的SU-8模具,提供了一种快速、复用性高、低成本的PDMS微芯片塑性成型的SU-8模具的制作方法.
关键词:
PDMS
,
塑性成型
,
SU-8模具
,
黏附性
刘俊
,
常梦洁
,
杜慧玲
高分子材料科学与工程
doi:10.16865/j.cnki.1000-7555.2016.04.023
利用静电纺丝和紫外光刻技术直接制备了不同结构的SU-8光刻胶纳米纤维薄膜及图案阵列.通过光学显微镜和扫描电子显微镜表征了纳米纤维的形貌、尺寸及结构.结果表明,通过改变SU-8光刻胶的黏度可形成不同直径和形貌的纤维结构,其中用SU-8 3010和SU-8 3050光刻胶制备的纳米纤维具有最优的形貌,其平均直径分别为470 nm和610nm.利用带有长方形缺口的铝箔和同轴电纺的方法分别制备了平行趋向和空心结构的纳米纤维.通过紫外光刻过程,可将SU-8纳米纤维加工成点阵、条状等不同形貌的图案阵列或结构,有望用作细胞培养研究的功能基底材料.
关键词:
静电纺丝
,
纳米纤维
,
SU-8光刻胶
,
纤维图案
张金娅
,
陈迪
,
朱军
,
李建华
,
方华斌
,
杨斌
功能材料与器件学报
doi:10.3969/j.issn.1007-4252.2005.02.027
采用新型SU-8光刻胶在UV-LIGA技术基础上制备了各种高深宽比MEMS微结构,研究了热处理和曝光两个重要因素对高深宽比微结构的影响,解决了微结构的开裂和倒塌等问题;优化了SU-8胶工艺,从而获得了最大深宽比为27:1的微结构.
关键词:
UV-LIGA技术
,
SU-8胶
,
高深宽比微结构
黄纯青
,
万广仁
量子电子学报
doi:10.3969/j.issn.1007-5461.2005.01.009
构造了激发双模SU(2)相干态|M,ξ;m〉=AMξma+mb+m|M,ξ〉,并用数值方法研究其非经典特性.结果表明,在双模SU(2)相干态的两场模同时增加光子后,两模光场仍然保持反关联特性,而且可以使光场对Cauchy-Schwartz不等式的破坏程度、光场的反聚束效应以及光子统计亚泊松分布等非经典特性得到加强.
关键词:
量子光学
,
非经典特性
,
激发
,
双模SU(2)相干态
