C.G.Hu
,
W.L.Wang
,
K.J.Liao
,
W.Zhu
金属学报(英文版)
The electrochemical behavior of a carboxyl-modified carbon nanotube films was inves-tigated to explore its possibility in electroanalytical applicaton. Cyclic voltammetry of quinone was conducted in 1mol/L Na2SO4, which showed a stable, quasi-reversible voltammetric response for quinone / hydroquinone, and the anodic and the cathodic peak potentials were 0.657V and -0.029V (vs. SCE) at a scan rate of 0.1V.s^-1, re-spectively. Both anodic and cathodic peak currents depended linearly on the square root of the scan rate over the range of 0.01-0.5V.s^-1, which suggested that the process of the electrode reactions was diffusion-controlled. Carboxyl-modified carbon nanotube electrodes made it possible to determine low level of dopamine selectively in the pres-ence of a large excess of ascorbic acid in acidic media using derivative voltammetry.The results obtained were discussed in details. This work demonstrates the potential of carboxyl-modified carbon nanotube electrodes for electroanalytical applications.
关键词:
carbon nanotube
,
null
,
null
C.G.Hu
,
W.L.Wang
,
W.Zhu
金属学报(英文版)
Wide potential windows were found at carbon nanotube film electrodes in neutral solutions after being treated with nitric acid and mixed acid. Electrochemical re-versibility was investigated at carbon nanotube films with different pretreatments for ferri/ferrocyanide and quinone /hydroquinone. Carbon nanotube film electrodes pre-sented quasi-reversible electrochemical behavior for both electrolytes. In the range of scan rate, carbon nanotube film electrodes treated with acids showed heterogeneous electron-transfer properties, which was mainly controlled by its electron state density on the surface of the film. On the whole, the carbon nanotube electrode with nitric acid treatment presented the best electrochemical behaviors, so we chose it as an analytical electrode to determine the trace compound in dilute solution. The results demonstrated that this new electrode material exhibits superior performance characteristics for the detection of azide anion.
关键词:
carbon nanotubes
,
null
,
null
周光明
,
梁中全
,
赵谦
宇航材料工艺
doi:10.3969/j.issn.1007-2330.2004.05.005
研究了C/G(碳/玻)层内混杂单向复合材料的力学性能,对其拉伸、弯曲、层间剪切、振动阻尼等性能进行了实验研究,并与同样铺层的纯C、G复合材料进行了对比分析.研究表明:C/G层内混杂复合材料可充分利用C、G纤维的各自优点,改善单一材料的模量、强度、断裂韧性、振动阻尼特性等力学性能,模量预测值与实验值较为接近,强度因影响因素较多,二者存在一定的差异,力学性能随C、G体积分数的变化符合混合律,说明了实验方法的合理性.通过C、G相对体积分数的合理设计可满足结构的实际要求.
关键词:
层内混杂
,
复合材料
,
力学性能
,
实验
杭祖圣
,
谈玲华
,
黄玉安
,
应三九
,
徐复铭
功能材料
在半封闭系统中采用直接热解三聚氰胺的方法制备了C3N4,XRD、XPS及元素分析的结果证明了产物是类石墨相C3N4(g-C3N4).用热分析(TG/DTG)研究了g-C3N4的热分解过程.通过迭代法计算了热分解反应活化能Ea,采用积分法结合36种动力学函数来判断g-C3N4热分解的机理函数.计算结果表明,g-C3N4的平均热分解活化能Ea为178.59kJ/mol,可能的动力学函数积分形式是g(a)=[-In(1-a)]4,指前因子A为21.67s-1,对应的热分解动力学方程为:dα/dT=(21.67/β)exp(-178.59×103/RT)×1/4(1-α)[-ln(1-α]-3
关键词:
非等温热重法
,
g-G3N4
,
热分解动力学
,
迭代法
Xifeng Lu Qilong Wang Deliang Cui
材料科学技术（英文）
g-C3N4/TiO2 composite were prepared by hydrolysis of Ti(OC4Hn 9 )4 and the precursors of g-C3N4 at room temperature and annealing in nitrogen atmosphere. X-ray diffraction results revealed that all the products were anatase structure. The chemical nature of O, N of the g-C3N4/TiO2 were identified by X-ray photoelectron spectroscopy, presenting N-Ti-O and N-Ti-N doping status of the composite. The g-C3N4/TiO2 composite showed better photocatalytic activity for the UV and visible-light degradation of Rhodamine B.
关键词:
Composite materials
,
Chemical synthesis
,
X-ray photoelectron spectroscopy (XPS)
楚增勇
,
原博
,
颜廷楠
无机材料学报
doi:10.15541/jim20130633
利用光催化剂将太阳能转化为人类可以直接利用的能量，并用其解决地球资源的枯竭和生存环境的恶化是可再生清洁能源研究的一个方向。g-C3N4的独特结构赋予其良好的光催化性能，使之成为光催化领域的研究热点。目前在光催化领域， g-C3N4主要用于催化污染物分解、水解制氢制氧、有机合成及氧气还原。在实际应用中，为进一步提高 g-C3N4的光催化效果，科研工作者开发了多种改进方法，例如物理复合改性、化学掺杂改性、微观结构调整等。本文主要论述了 g-C3N4在光催化领域的应用以及光催化性能的改进方法，简要阐述了光催化和各种改进方法的机理，分析了目前g-C3N4在光催化领域面临的问题和挑战，展望了g-C3N4的应用前景。
关键词:
g-C3N4
,
光催化
,
改进方法
,
综述
郑小刚
,
杜京城
,
李子黎
,
付孝锦
,
由耀辉
,
刘勇
人工晶体学报
采用浸渍法制备不同掺杂量的负载型光催化剂Ni/g-C3N4,并考察其在可见光照下对亚甲基蓝的光降解性能.利用XRD、FT-IR、SEM、TEM、XPS、N2-sorption和ICP-OES等手段表征Ni/g-C3N4样品.研究表明,Ni/g-C3N4催化剂的光催化活性随着金属镍粒子掺杂量的增加而增大,随着亚甲基蓝浓度的增大而减小,其中金属镍掺杂量4.0wt%的样品4-Ni/g-C3N4表现出优异的光催化活性和光降解稳定性.这是由于4-Ni/g-C3N4样品的光降解过程中产生了超氧自由基、羟基自由基和空穴等活性物质,其中超氧自由基起主导作用.金属Ni0离子在光生电子作用下生成Ni2+,O2分子得到电子生成O2·-自由基.这些活性物质的产生有助于光生电子-空穴对的分离和抑制其复合速率,从而实现可见光下高效催化降解亚甲基蓝.
关键词:
Ni/g-C3N4
,
掺杂效应
,
亚甲基蓝
,
光降解性能
Thin Solid Films
The SiO(2)-Al(2)O(3)-ZrO(2)-CaO-ZnO glass-ceramic composite coatings (GC), nanocrystalline NiCoCrAlY coating, and their combinations (bi-layer GC/NiCoCrAlY) were prepared on K38G specimens. The thicknesses of the glass-ceramic coatings and the NiCoCrAlY coatings were about 10 mu m and 20 mu m, respectively. Cyclic oxidation tests were carried out at 1100 degrees C for 120 cycles. Microstructures of the specimens before and after oxidation tests were characterized by SEM, EDS and XRD. The glass-ceramic coatings with or without a NiCoCrAlY intermediate layer improved the isothermal and cyclic oxidation resistance of the Ni-base superalloy K38G at 1100 degrees C, and performed better than the NiCoCrAlY coatings. An alumina layer formed at the glass/metal interfaces of the specimens coated by the glass-ceramic coatings with or without a NiCoCrAlY intermediate layer. The NiCoCrAlY intermediate layer was beneficial to the cyclic oxidation resistance of the glass-ceramic coatings. (C) 2011 Elsevier B.V. All rights reserved.
关键词:
Glass-ceramic coating;NiCoCrAlY;Cyclic oxidation;Magnetron sputtering;resistance;microstructure;scales
王君
,
邹家桂
,
陈政标
,
高建武
,
刘彦坤
,
张杰元
,
宋莎
绝缘材料
为解决苯乙烯和甲基苯乙烯在VPI浸渍树脂应用于风力发电机中的不足，采用不饱和聚酯亚胺、引发剂和无挥发活性稀释剂研制出116HU聚酯亚胺无挥发浸渍树脂，并对其各项性能进行了研究。结果表明：116HU聚酯亚胺无挥发浸渍树脂的常规性能满足风力发电机的要求，其耐热等级可达H级。用该树脂浸渍的风电模拟线棒具有优异的介电性能、耐湿热交变和高低温循环冲击性能及耐盐雾性能等，能满足风力发电机在极端环境运行的要求。
关键词:
聚酯亚胺
,
无挥发
,
VPI
,
风力发电机
,
耐湿热
,
耐盐雾
