Fang Geng
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately
controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive β-
tricalcium phosphate (β-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility,
and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties
of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength
similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed
that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the β-
TCP coated porous Mg, which indicates that the β-TCP coated porous Mg is promising to be a bone tissue
engineering scaffold material.
关键词:
Magnesium
,
Bone tissue engineering
,
β-TCP coating
,
Biocompatibility
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive beta-tricalcium phosphate (beta-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility, and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the beta-TCP coated porous Mg, which indicates that the beta-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.
关键词:
Magnesium;Bone tissue engineering;beta-TCP coating;Biocompatibility;simulated body-fluid;mechanical-properties;cancellous bone;foam;scaffolds;magnesium;hydroxyapatite;porosity;bioceramics;fabrication;ph
Hanwei HE
,
Kechao ZHOU
材料科学技术（英文）
A new method for preparation of TaC coating on C/C composite material is reported. The amorphous ethylate tantalum jellied as the precursor is prepared and spread densely on the surface of the C/C composite material so as to form a multilayer film. In a graphitization furnace the multilayer film is transformed into TaC coating at various temperatures. Ethylate tantalum film is characterized by FT-IR (Fourier transform infrared) spectra, XRD (X-ray diffraction) and SEM (scanning electron microscopy) and TaC coating is characterized by XRD and SEM. At 1200℃ the coating contained TaC and Ta¬2O5, and at above 1400℃ only TaC is formed. The coating formed at 1600℃ is a continuous stratum structure, and that formed at 1600℃ is a porous net structure. Analysis on thermodynamics and formation mechanism of TaC indicates that, after ethylate tantalum is decomposed, Ta2O¬5 is first produced and then transformed into Ta2C, and newly formed Ta2C is transformed into TaC by the sufficient C at last.
关键词:
C/C composite
,
composite
,
material
,
TaC
,
coating
,
ethyl
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
张立春
,
何安强
,
叶恒强
,
张永昌
材料研究学报
用HRTEM、TEM及EDAX分析研究了Al─Li—Cu—Mg—Zr合金中的一种新相(暂名H相)和六角Z相的结构,确定H相具有四方点阵,点阵参数为α=2.8nm,c=2.4nm,EDAX分析表明H相和Z相均含Al、Mg、Cu发现H相与Z相的共存取向关系为[100]‖[1120]Z,[1010]H‖[0001]Z。还观察到Z相中一种特有的旋转畴结构
关键词:
Al─Li─Cu─Mg─Zr合金.四方H相
,
tetragonal H phase
,
hexagonal Z phase
Y.G. Cao
,
X.Y. Sun
金属学报(英文版)
J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.
关键词:
FRASTA
,
null
,
null
刘(韦华)
,
矫桂琼
材料科学与工程学报
碳纤维平纹编织物和穿透厚度的碳纤维Z-pins制作的预成型体,通过化学气相渗透工艺制备了Z-pins增强平纹编织C/SiC复合材料.采用双缺口剪切压缩试验测定了Z-pins增强平纹编织C/SiC复合材料的层间剪切强度,通过断口的电镜照片分析了层间剪切的破坏机理.研究了Z-pins个数对层间剪切强度的影响.结果表明:与未增强陶瓷基复合材料相比较,当Z-pins个数达到一定数量时,Z-pins插入能够提高层间剪切强度,层问剪切强度随Z-pins个数的增多而增加.Z-pins插入改变了陶瓷基复合材料的层间破坏机理,使层间织物与基体的脱离变为Z-pins的剪切破坏和层间织物与基体脱离的双重破坏机制.
关键词:
陶瓷基复合材料
,
层间剪切强度
,
双缺口剪切试验
李虎
,
王作成
,
薛长深
,
庄栋栋
,
王晓
,
张思勋
材料热处理学报
为了研究钢中合金元素Nb、B、Ni对低合金高强度H型钢抗层状撕裂能力(Z向性能)的影响,设计了对照试验,通过常温下拉力试验,对其力学性能尤其是断面收缩率进行了测试,使用XRD、SEM、TEM以及EDS对其组织和成分进行了分析.结果表明:微合金元素Nb、B和微量元素Ni对钢材的Z向性能产生了明显的不良影响,含有Nb、B和Ni,经过钢包精炼的Q345E钢的Z向性能显著低于不含Nb、B和Ni,未经钢包精炼且含有较多夹杂物的Q345B钢.其原因主要在于Nb、B、Ni的存在阻碍了钢材变形过程中位错在晶界和晶内的移动.
关键词:
低合金高强度钢
,
Z向性能
,
合金元素
,
夹杂物
,
阻碍位错
姜志进
原子核物理评论
在核吸收与随动者吸收理论的基础上,给出了在有QGP相变情况下高能重离子碰撞中的J/Ψ微分产生截面,并用其讨论了CERN的NA50合作组给出的入射动量为158 AGeV/c的Pb-Pb碰撞中的J/Ψ反常抑制现象。理论较好地解释了实验结果。
关键词:
J/Ψ反常抑制
,
核吸收
,
随动者
