D M DIMIDUK(Wright-Laboratory
,
Materials Directorate
,
WL/MLLM
,
Wright-Patterson AFB
,
OH45433-7817
,
USA)P R SUBRAMANIAN and M G MENDIRATTA (UES
,
Inc.
,
Dayton
,
OH 45432
,
USA)
金属学报(英文版)
Since the late 1980's there have been a number of research efforts aimed at exploring and developing the refractory intermetalllic materials for service at temperatures which compete with the nickel-based superalloys in structural applications. These efforts have documented the physical and mechanical properties of a broad set of compositions. However, only in the last three years have these efforts yielded sufficient experimental results on single selected systems to suggest that damage tolerance, creep resistance and oxidation resistance may be obtained and controlled simultaneously. These findings led to alloy development concepts and approaches which are currently under investigation and are expected to lead to research focused on a smaller set of alloys. An overview of selected alloy development strategies and resulting structural properties is presented herein.
关键词:
: refractory intermetallics
,
null
,
null
D.Eylon
,
S.R.Seagle
材料科学技术（英）
The state of Ti research, development and industry is reviewed in this article. The fifty-year anniversary of Ti technology commercialization in the USA provides an opportunity for a historical perspective. Incorporation of "information-age" tools into alloy development, processing, and production invigorates the technology. Consolidation, diversification and globalization have been transforming the Ti industry in the recent years.
关键词:
Solid State Communications
Samples with composition R2Fe14M3 (M = Ga and Si; R = Y, Nd, Sm, Gd, Tb, Dy, Ho, Er and Tm) have been prepared by are-melting. Crystal-structure studies have shown that the prepared samples are single phase with the rhombohedral Th2Zn17 and/or the hexagonal Th2Ni17 structure. Substitution of Ga for Fe in R2Fe17 leads to an increase of the unit-cell volume, whereas Si substitution reduces the unit-cell volume. The Curie temperatures of the R2Fe14Ga3 and R2Fe14Si3 compounds are much larger than those of the corresponding R2Fe17 compounds. The Fe moment decreases upon Ga or Si substitution. The compounds R2Fe14Ga3 and R2Fe14Si3 With R = Er and Tm exhibit a spin-reorientation transition at low temperature. (C) 1997 Elsevier Science Ltd.
关键词:
neutron-diffraction;solid-solutions;substitution;anisotropy;nd2fe17
马敬翙
,
刘光明
,
曾潮流
,
杜楠
,
赵晴
表面技术
doi:10.3969/j.issn.1001-3660.2006.04.005
采用电化学方法、扫描电镜、能谱分析等技术,研究了常温下镍基高温合金M17和M38G在NaCl溶液和含S2O2-3的NaCl溶液中的腐蚀行为.结果表明,在含质量分数为3.5% NaCl的溶液中,M17和M38G均会遭受严重的点腐蚀;向NaCl溶液(NaCl质量分数为3.5%)添加Na2S2O3(Na2S2O3质量分数为1.5%)后,由于溶液中的S2O2-3在试样表面活性点与Cl-竞争吸附并与H+结合,使两种合金的点蚀均受到抑制;M38G中存在微量的Nb、Ta、Mo等元素使得M38G合金在NaCl溶液中的耐腐蚀性能明显优于M17合金.
关键词:
镍基
,
高温合金
,
点蚀
,
电化学方法
,
腐蚀行为
张洪生
,
张玥
,
郭卫红
,
王晓光
,
李滨耀
,
吴驰飞
高分子材料科学与工程
通过红外光谱证明在加工过程中,SEBS-g-MA的酸酐基团与PET的端羟基发生反应生成了共聚物,研究了SEBS-g-MA用量对共混物的流动性和动态力学性质的影响,MFR分析结果表明,随着SEBS-g-MA用量增加,共混物的流动性呈现先升高后降低趋势,DMA分析结果表明,SEBS-g-MA用量为10%(质量分数)时,共混物的储能模量和损耗模量与未添加SEBS-g-MA的共混物的结果接近,且SEBS-g-MA用量对共混物的tanδ无影响.
关键词:
回收对苯二甲酸二乙酯
,
线性低密度聚乙烯
,
SEBS-g-MA
,
动态力学性质
齐召庆
,
汪宏涛
,
薛明
功能材料
doi:10.3969/j.issn.1001-9731.2016.02.010
采用改进的非接触式混凝土收缩测定仪及标靶,研究了m(M)/m(P)比值(MgO与KH2PO4的质量比)对磷酸镁水泥石自收缩行为的影响,运用八通道微量量热仪、压汞仪、X射线衍射仪、扫描电子显微镜及能谱仪等分析手段,分析了m(M)/m(P)比值对磷酸镁水泥石自收缩的作用机理.结果表明,磷酸镁水泥石的自收缩呈现出3个阶段的特征,即早期的迅速收缩阶段、微膨胀阶段、收缩缓慢发展阶段.随着m(M)/m(P)比值的增大,由于磷酸镁水泥石的水化放热量降低,水泥石内部孔隙率增大,水化产物结晶度降低,水泥石结构疏松,所以,自收缩率减小.
关键词:
磷酸镁水泥
,
自收缩
,
m(M)/m(P)比值
林水东
,
丁马太
功能材料
用示差扫描量热法(DSC)考察了聚丙烯(PP)、聚丙烯/云母(PP/M)和聚丙烯/聚(丙烯-g-甲基丙烯酸甲酯)/云母复合材料(PP/PP-g-MMA/M)的非等温结晶过程.用Avrami方程和Ozawa方程对上述过程进行分析,n、t1/2、F(T)、Tp等参数表明,M和PP-g-MMA,特别是PP-g-MMA的掺入改变了PP的结晶成核和生长机理.用Dobreva方法分析填料的成核活性,ε数值表明,M有较强的成核活性,PP-g-MMA的掺入又进一步增强其成核活性,从而使结晶温度明显提高.Kissinger方法的计算结果表明,添加M可使PP的结晶活化能减小,再添加PP-g-MMA又使PP/M复合体系的结晶活化能进一步减小.
关键词:
聚丙烯
,
聚(丙烯-g-甲基丙烯酸甲酯)
,
云母
,
复合材料
,
非等温结晶动力学
