Y.S.Shi
,
S.C.Chen
,
X.L.Lu
,
S.H.Huang
金属学报(英文版)
How to directly fabricate metallic functional parts with selective laser sintering (SLS) process is a potential technique that scientists are researching. Existent problems during directly fabricating metal part by use of SIS are analyzed. For the sake of solving the problems, a new idea of adding self-propagating high-temperature synthesis (SHS) material into metallic powder material to form new type of SIS metallic powder material is put forward. This powder material can release controllable amount of heat during its interaction with the laser beam energy to reduce the requirement to laser power during directly sintering metallic part, to prolong the time of metallic liquid phase existing, and to improve the intensity and accuracy of SIS part. For this reason, SHS material's interaction with the CO2 laser beam energy is researched, which proves that CO2 laser beam energy may instantly ignite SHS reaction. On the basis of the above-mentioned researches, the effect of sintering the metal powder material mixing SHS material with CO2 laser is also researched,which shows: there is an optimal blending ratio of various material in the new metallic powder material. Under the optimal blending ratio and SIS process parameters, this new metallic powder material can indeed release amount of heat and SHS reaction may be controlled within the laser sintering. This research result makes it possible that the metallic part is directly sintered with small CO2 laser (less than 50W), which may greatly reduce the volume, cost and running expenditure of SIS machine, be propitious to application.
关键词:
selective laser sintering (SLS)
,
null
陈树东
,
项建明
,
王晓翠
,
洪笑
硅酸盐通报
以Ca(OH)2、SiO2、Fe2O3、Al2O3化学纯为原料,分别掺入不同质量分数的Ba(OH)2制备不同矿物相组成的熟料相,运用化学分析、XRD、SEM、水化热测试方法,研究掺Ba(OH)2后熟料相中硅酸三钙-硅酸二钙(C3S-C2S)混合相组成、晶型、新相生成的变化规律.结果表明:Ba(OH)2一定程度上削弱C3S形成,且稳定β-C2S形成效应明显,矿物相体系中α'-C2S、α-C2S量减少并转换为β-C2S,掺量大于2.5%后有新相Ba0.48 Ca1.52SiO4形成;Ba(OH)2掺入促使矿物相中C2S相明显增多,晶粒整体尺寸变小,边界变圆润;随Ba(OH)2掺量递增,熟料样的水化速率呈持续减小的趋势变化.
关键词:
C3S相
,
β-C2S
,
水化速率
,
水化
姜奉华
,
徐德龙
硅酸盐通报
doi:10.3969/j.issn.1001-1625.2004.06.006
通过研究Q相与C2S和Q相与C4AF的共存条件,构造Q相-C2S-C4AF水泥系统,对此系统水泥形成条件进行研究.研究表明:Q相与C2S和Q相与C4AF能够共存,可以组成Q相-C2S-C4AF-C12A7水泥系统.在Q相-C2S-C4AF-C12A7水泥系统中,Q相在1270℃开始生成,随着温度的升高,Q相的生成量逐渐增大;采用V2O5对β-C2S具有较好的稳定作用.随着C4AF量的增加,Q相的量也在增加,同时,烧成温度降低.
关键词:
Q相
,
Q相-C2S-C4AF水泥
,
形成条件
,
抗压强度
管宗甫
硅酸盐通报
用工业原料在不同温度预合成C2S(2CaOSiO2)为主要矿物的前导物,并以该前导物为基础,补入适量的钙,在不同温度下二次烧成水泥熟料.结果显示:采用1250℃、1300℃和1350℃预合成的C2S前导物配料二次烧方法,有利于熟料在低温下烧成,在1350℃左右实验熟料样品中游离氧化钙即可小于1.0%.相应C3S在熟料体系中的表观形成活化能相比不同配料烧成的对比组明显降低,而不同温度制备的前导物配料,C3S在熟料体系中的形成活化能相差无几.
关键词:
C2S前导物
,
二次烧成
,
水泥熟料
,
硅酸三钙
,
活化能
李开明
,
李亚洲
,
冯维贵
,
林长
量子电子学报
doi:10.3969/j.issn.1007-5461.2007.05.014
采用非线性反馈控制,用附加了带参数的正弦项对Chen系统进行了有效的控制.随着参数k的逐渐增大,系统的动力学行为呈现出一系列的变化.数值研究结果表明:随控制参数的增大,驱动信号的强度渐大,混沌系统由混沌运动到周期轨道,最终到一相点.
关键词:
混沌
,
Chen系统
,
不动点
,
Lyapunov指数
,
反馈控制