Author J.H. Lee 1)
,
K.B. Yoon2)
,
Y.J. Kim3)and U.B. Baek4) 1) Engineering Research Department
,
Korea Institute of Nuclear Safety
,
P.O. Box 114
,
Yoosung
,
Taejon 305600
,
Korea2) Department of Mechanical Engineering
,
Chung Ang University
,
221 Huksuk
,
Dongjak
,
Seoul 156756
,
Korea3) Department of Mechanical Engineering
,
Sungkyunkwan University
,
300 Chunchun
,
Jangan
,
Suwon 440746
,
Korea4) Failure Prevention Research Center
,
Korea Research Institute of Standards and Science
,
P.O. Box 102
,
Yoosung
,
Taejon 305600
,
KoreaManuscript received 18 October 1998
金属学报(英文版)
Most of the assessment equations for Ct which is a wellknown fracture parameter characterizing high temperature crack growth rates, have limited applicability to constant load conditions after sudden loading. However, crack growth due to creep can also occur under load varying conditions when load rising time is so long that accumulated creep deformation near the crack tip is not negligible.In this paper, the estimation equation of the Ctparameter which can be applied to the case of slow load rising, i.e., (Ct)r, is explained. And the correlation between (Ct)r at the end of the load increasing period and Ct at the beginning of the succeeding load hold period is discussed. Finite element analyses of several cases with various loading conditions were performed and results were presented to show the effectiveness of the proposed Ct estimation scheme. The general applicability of the equation is also discussed.
关键词:
creep
,
null
,
null
,
null
,
null
,
null
Pan Ting
,
Song Wenjing
,
Cao Xiaodong
,
Wang Yingjun
材料科学技术（英文）
doi:10.1016/j.jmst.2016.01.007
Gelatin/Alginate hydrogels were engineered for bioplotting in tissue engineering. One major drawback of hydrogel scaffolds is the lack of adequate mechanical properties. In this study, using a bioplotter, we constructed the scaffolds with different pore architectures by deposition of gelatin/alginate hydrogels layer-by-layer. The scaffolds with different crosslinking degree were obtained by post-crosslinking methods. Their physicochemical properties, as well as cell viability, were assessed. Different crosslinking methods had little influence on scaffold architecture, porosity, pore size and distribution. By contrast, the water absorption ability, degradation rate and mechanical properties of the scaffolds were dramatically affected by treatment with various concentrations of crosslinking agent (glutaraldehyde). The crosslinking process using glutaraldehyde markedly improved the stability and mechanical strength of the hydrogel scaffolds. Besides the post-processing methods, the pore architecture can also evidently affect the mechanical properties of the scaffolds. The crosslinked gelatin/alginate scaffolds showed a good potential to encapsulate cells or drugs.
关键词:
Bioplotting
,
Tissue engineering
,
Scaffolds
,
Gelatin
,
Alginate
Mehdi Ebrahimian-Hosseinabadi Fakhredin Ashrafizadeh Mohammadreza Etemadifar Subbu S. Venkatraman
材料科学技术（英文）
In this paper, preparation of nano-biphasic calcium phosphate (nBCP), mechanical behavior and load-bearing of poly (lactide-co-glycolide) (PLGA) and PLGA/nBCP are presented. The nBCP with composition of 63/37 (w/w) HA/β-TCP (hydroxyapatite/β-tricalcium phosphate) was produced by heating of bovine bone at 700°C. Composite scaffolds were made by using PLGA matrix and 10-50 wt% nBCP powders as reinforcement material. All scaffolds were prepared by thermally induced solid-liquid phase separation (TIPS) at -60°C under 4 Pa (0.04 mbar) vacuum. The results of elastic modulus testing were adjusted with Ishai-Cohen and Narkis models for rigid polymeric matrix and compared to each other. PLGA/nBCP scaffolds with 30 wt% nBCP showed the highest value of yield strength among the scaffolds. In addition, it was found that by increasing the nBCP in scaffolds to 50 wt%, the modulus of elasticity was highly enhanced. However, the optimum value of yield strength was obtained at 30 wt% nBCP, and the agglomeration of reinforcing particles at higher percentages caused a reduction in yield strength. It is clear that the elastic modulus of matrix has the significant role in elastic modulus of scaffolds, as also the size of the filler particles in the matrix.
关键词:
Scaffold
Materials Science & Engineering C-Biomimetic Materials Sensors and Systems
Bamboo, one of the strongest natural structural composite materials, has many distinguishing features. It has been found that its reinforcement unit, hollow, multilayered and spirally-wound bast fiber, plays an extremely important role in its mechanical behavior. In the present work, on the basis of the study on bamboo bast fiber and wood tracheid, a biomimetic model of the reinforcing element, composed of two layers of helically wound fiber, was suggested. To detect the structural characteristics of such a microstructure, four types of macro fiber specimens made of engineering composites were employed: axially aligned solid and hollow cylinders, and single- and double-helical hollow cylinders. These specimens were subjected to several possible loadings, and the experimental results reveal that only the double-helical structural unit possesses the optimum comprehensive mechanical properties. An interlaminar transition zone model imitating bamboo bast fiber was proposed and was verified by engineering composite materials. In our work, the transition zone can increase the interlaminar shear strength of the composite materials by about 15%. These biomimetic structural models can be applied in the design and manufacture of engineering composite materials.
关键词:
bamboo;bast fiber;biomimetics;engineering composites
Andrej Atrens
材料科学技术（英文）
Corrosion research by Atrens and co-workers has made significant contributions to the understanding of the service performance of engineering materials. This includes: (1) elucidated corrosion mechanisms of Mg alloys, stainless steels and Cu alloys, (2) developed an improved understanding of passivity in stainless steels and binary alloys such as Fe-Cr, Ni-Cr, Co-Cr, Fe-Ti, and Fe-Si, (3) developed an improved understanding of the melt spinning of Cu alloys, and (4) elucidated mechanisms of environment assisted fracture (EAF) of steels and Zr alloys. This paper summarises contributions in the following: (1) intergranular stress corrosion cracking of pipeline steels, (2) atmospheric corrosion and patination of Cu, (3) corrosion of Mg alloys, and (4) transgranular stress corrosion cracking of rock bolts.
关键词:
Stress corrosion cracking
,
null
,
null
Science
Strengthening materials traditionally involves the controlled creation of internal defects and boundaries so as to obstruct dislocation motion. Such strategies invariably compromise ductility, the ability of the material to deform, stretch, or change shape permanently without breaking. Here, we outline an approach to optimize strength and ductility by identifying three essential structural characteristics for boundaries: coherency with surrounding matrix, thermal and mechanical stability, and smallest feature size finer than 100 nanometers. We assess current understanding of strengthening and propose a methodology for engineering coherent, nanoscale internal boundaries, specifically those involving nanoscale twin boundaries. Additionally, we discuss perspectives on strengthening and preserving ductility, along with potential applications for improving failure tolerance, electrical conductivity, and resistance to electromigration.
关键词:
strain-rate sensitivity;stacking-fault energy;nano-scale twins;cu-al;alloys;nanocrystalline metals;mechanical-properties;activation;volume;copper;deformation;behavior
Biomedical Materials
In this work, porous magnesium (Mg) with a three-dimensional open-cellular structure, potentially employed as bone tissue engineering scaffolds, was fabricated by the mechanical perforation method. The influences of porosity, pore size and pore arrangement on compressive behavior and the anisotropy of new porous Mg were analyzed theoretically using orthogonal arrays and the finite element method (FEM). The results showed that the parameters of porosity, pore size and pore arrangement had different effects on the compressive properties. The compressive strength could be improved by optimizing these parameters. The anisotropy of porous Mg was also verified in this study. The theoretical results showed good agreement with the experimental ones before the strain reaches 0.038.
关键词:
unidirectional solidification;pore-size;hydroxyapatite;replacement;cartilage;porosity;matrix
