Z. Bian
,
G. He and G.L. Chen (State Key Laboratory for Advanced Metals and Materials
,
University of Science and Technology Beijing
,
Beijing 100083
,
China) J. Lu
,
D.J. Chen
,
G.C. Tu
,
G.J. Chen and X.J. Hu (Shougang Metallurgical Research Institute
,
Beijing 100085
,
China)
金属学报(英文版)
Al80Ni6 Y8 Co4 Cu2 amorphous ribbons were isothermally annealed and a mixed structure consisting of α-Al particle with a size of less than 15nm and Al3Ni compound with a size of about 30nm was obtained. The crystallization kinetics of Al80Ni6 Y8 Co4 Cu2 amorphous alloy shows that the precipitation of α-Al particles is the growth process controlled by diffusion of the solute elements rejected from the growing crystals. By quenching at different cooling rates, a mixed structure consisting of nanoscale α-Al particles and the remaining glass matrix or structure consisting of nanoscale particle (Al phase or Al3Ni compound) with a size of about 100nm was formed. The addition of Co elements and Cu elements to Al-Ni-Y alloy systems increases the glass formation ability of the alloy and the thermal stability of the supercooled liquid region against crystallization, which results from significant difference of atomic size, strong bonding nature among constituent elements and the low diffisivity of the solute elements due to the concentration gradient in the growing front of crystals.
关键词:
a mixed structure
,
null
,
null
,
null
,
null
,
null
,
null
周光明
,
梁中全
,
赵谦
宇航材料工艺
doi:10.3969/j.issn.1007-2330.2004.05.005
研究了C/G(碳/玻)层内混杂单向复合材料的力学性能,对其拉伸、弯曲、层间剪切、振动阻尼等性能进行了实验研究,并与同样铺层的纯C、G复合材料进行了对比分析.研究表明:C/G层内混杂复合材料可充分利用C、G纤维的各自优点,改善单一材料的模量、强度、断裂韧性、振动阻尼特性等力学性能,模量预测值与实验值较为接近,强度因影响因素较多,二者存在一定的差异,力学性能随C、G体积分数的变化符合混合律,说明了实验方法的合理性.通过C、G相对体积分数的合理设计可满足结构的实际要求.
关键词:
层内混杂
,
复合材料
,
力学性能
,
实验
杭祖圣
,
谈玲华
,
黄玉安
,
应三九
,
徐复铭
功能材料
在半封闭系统中采用直接热解三聚氰胺的方法制备了C3N4,XRD、XPS及元素分析的结果证明了产物是类石墨相C3N4(g-C3N4).用热分析(TG/DTG)研究了g-C3N4的热分解过程.通过迭代法计算了热分解反应活化能Ea,采用积分法结合36种动力学函数来判断g-C3N4热分解的机理函数.计算结果表明,g-C3N4的平均热分解活化能Ea为178.59kJ/mol,可能的动力学函数积分形式是g(a)=[-In(1-a)]4,指前因子A为21.67s-1,对应的热分解动力学方程为:dα/dT=(21.67/β)exp(-178.59×103/RT)×1/4(1-α)[-ln(1-α]-3
关键词:
非等温热重法
,
g-G3N4
,
热分解动力学
,
迭代法
Xifeng Lu Qilong Wang Deliang Cui
材料科学技术（英文）
g-C3N4/TiO2 composite were prepared by hydrolysis of Ti(OC4Hn 9 )4 and the precursors of g-C3N4 at room temperature and annealing in nitrogen atmosphere. X-ray diffraction results revealed that all the products were anatase structure. The chemical nature of O, N of the g-C3N4/TiO2 were identified by X-ray photoelectron spectroscopy, presenting N-Ti-O and N-Ti-N doping status of the composite. The g-C3N4/TiO2 composite showed better photocatalytic activity for the UV and visible-light degradation of Rhodamine B.
关键词:
Composite materials
,
Chemical synthesis
,
X-ray photoelectron spectroscopy (XPS)
楚增勇
,
原博
,
颜廷楠
无机材料学报
doi:10.15541/jim20130633
利用光催化剂将太阳能转化为人类可以直接利用的能量，并用其解决地球资源的枯竭和生存环境的恶化是可再生清洁能源研究的一个方向。g-C3N4的独特结构赋予其良好的光催化性能，使之成为光催化领域的研究热点。目前在光催化领域， g-C3N4主要用于催化污染物分解、水解制氢制氧、有机合成及氧气还原。在实际应用中，为进一步提高 g-C3N4的光催化效果，科研工作者开发了多种改进方法，例如物理复合改性、化学掺杂改性、微观结构调整等。本文主要论述了 g-C3N4在光催化领域的应用以及光催化性能的改进方法，简要阐述了光催化和各种改进方法的机理，分析了目前g-C3N4在光催化领域面临的问题和挑战，展望了g-C3N4的应用前景。
关键词:
g-C3N4
,
光催化
,
改进方法
,
综述
李佩
,
周世平
,
刘少斌
,
刘绍虎
,
陈丽华
,
王健
贵金属
doi:10.3969/j.issn.1004-0676.2010.03.003
采用轧制复合法制备AgCuNi/TU1复合带材,使用EDS能谱仪分析不同退火条件下复合界面元素的扩散情况,利用两端不受扩散影响的扩散偶模型和Arrenius关系计算退火温度在550～750℃下Ag在TU1中的扩散系数、扩散常数与扩散激活能.结果显示:退火温度在550～750℃之间,分钟级退火时间下(退火时间<5 min),AgCuNi/TU1复合界面主要发生表面原子扩散,且扩散系数和扩散常数在同一数量级,而扩散激活能有明显差别.
关键词:
金属材料
,
复合材料
,
扩散系数
,
扩散常数
,
扩散激活能
乔勋
,
王健
,
周世平
,
贺晓燕
,
李林修
贵金属
doi:10.3969/j.issn.1004-0676.2009.02.002
用室温固相轧制复合法制备了AgCuCe/TU1层状复合材料,研究了不同扩散退火工艺对AgCuCe/TU1界面结合性能的影响,测定了复合材料复层和基体的硬度,观察了试样的界面微观组织.结果表明:600 ℃/0.5 h扩散退火可以改善界面结合状态和界面附近组织形貌,获得充分的再结晶组织和致密的界面结合状态;700 ℃/0.5 h扩散退火在界面处形成细晶区和孔洞;750 ℃/0.5 h扩散退火使AgCuCe/TU1在界面处形成氧化物夹杂,严重损害界面结合性能.
关键词:
金属材料
,
复合材料
,
扩散退火
,
界面
,
显微组织
郑小刚
,
杜京城
,
李子黎
,
付孝锦
,
由耀辉
,
刘勇
人工晶体学报
采用浸渍法制备不同掺杂量的负载型光催化剂Ni/g-C3N4,并考察其在可见光照下对亚甲基蓝的光降解性能.利用XRD、FT-IR、SEM、TEM、XPS、N2-sorption和ICP-OES等手段表征Ni/g-C3N4样品.研究表明,Ni/g-C3N4催化剂的光催化活性随着金属镍粒子掺杂量的增加而增大,随着亚甲基蓝浓度的增大而减小,其中金属镍掺杂量4.0wt%的样品4-Ni/g-C3N4表现出优异的光催化活性和光降解稳定性.这是由于4-Ni/g-C3N4样品的光降解过程中产生了超氧自由基、羟基自由基和空穴等活性物质,其中超氧自由基起主导作用.金属Ni0离子在光生电子作用下生成Ni2+,O2分子得到电子生成O2·-自由基.这些活性物质的产生有助于光生电子-空穴对的分离和抑制其复合速率,从而实现可见光下高效催化降解亚甲基蓝.
关键词:
Ni/g-C3N4
,
掺杂效应
,
亚甲基蓝
,
光降解性能
Thin Solid Films
The SiO(2)-Al(2)O(3)-ZrO(2)-CaO-ZnO glass-ceramic composite coatings (GC), nanocrystalline NiCoCrAlY coating, and their combinations (bi-layer GC/NiCoCrAlY) were prepared on K38G specimens. The thicknesses of the glass-ceramic coatings and the NiCoCrAlY coatings were about 10 mu m and 20 mu m, respectively. Cyclic oxidation tests were carried out at 1100 degrees C for 120 cycles. Microstructures of the specimens before and after oxidation tests were characterized by SEM, EDS and XRD. The glass-ceramic coatings with or without a NiCoCrAlY intermediate layer improved the isothermal and cyclic oxidation resistance of the Ni-base superalloy K38G at 1100 degrees C, and performed better than the NiCoCrAlY coatings. An alumina layer formed at the glass/metal interfaces of the specimens coated by the glass-ceramic coatings with or without a NiCoCrAlY intermediate layer. The NiCoCrAlY intermediate layer was beneficial to the cyclic oxidation resistance of the glass-ceramic coatings. (C) 2011 Elsevier B.V. All rights reserved.
关键词:
Glass-ceramic coating;NiCoCrAlY;Cyclic oxidation;Magnetron sputtering;resistance;microstructure;scales
