Kezhi LI
,
Chuang WANG
,
Hejun LI
,
Gengsheng JIAO
,
Jian WEI
材料科学技术（英文）
The influence of dispersion of carbon fibers in carbon-fiber-reinforced cement-based composites (CFRC) on the mechanical properties of the composites was discussed. The microstructure of the fracture surface of the CFRC samples was observed with a scanning electron microscope (SEM). The electromagnetic interference (EMI) was evaluated indirectly by reflectivity in the Naval Research Laboratory (NRL) testing system. The reflectivity of the electromagnetic radiation by the composites was measured in the frequency range of 8.0–8.2 GHz for different carbon fiber contents of 0.2%, 0.4%, 0.6%, 0.8%, and 1.0% (in wt pct), respectively. The results showed that the reflectivity decreased with the growing fiber content till the percentage of 0.6%. The minimum reflectivity was -23 dB, far less than ¡10 dB, and the composites were strong wave absorbers. After this percentage, the curve increased abruptly as the fiber content proceeded. The electromagnetic waves were gradually reflected. When the fiber content reached 1.0% finally, the maximum reflectivity -7.5 dB appeared and there was stronger reflection. The shielding mechanism includes mainly reflection, absorption, and multiple reflections.
关键词:
Carbon fibers
,
fibers
,
Cement-based
,
EMI
,
Reflectiv
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
盖红星
,
李建军
,
韩军
,
邢艳辉
,
邓军
,
俞波
,
沈光地
,
陈建新
量子电子学报
doi:10.3969/j.issn.1007-5461.2005.01.016
采用Shu Lien Chuang方法计算了AlInGaAs/AlGaAs应变引起价带中重、轻空穴能量变化曲线,在Harrison模型的基础上详细地计算了AlInGaAs/AlGaAs和GaAs/AlGaAs量子阱电子、空穴子能级分布并且进一步研究了这两种材料在不同注入条件下的线性光增益.进一步计算比较可以得出AlInGaAs/AlGaAs应变量子阱光增益特性要优于GaAs/AlGaAs非应变量子阱增益特性,因此AlInGaAs/AlGaAs应变量子阱半导体材料应用于半导体激光器比传统GaAs/AlGaAs材料更具优势.
关键词:
光电子学
,
应变量子阱
,
光增益
,
AlInGaAs
,
半导体激光器
材料科学技术（英文）
The effect of interstitial hydrogen on the cohesion of the Al Sigma=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.
关键词:
hydrogen;grain boundary;Al-Mg alloys;pseudopotentials;1st-principles
Xiaoguang LIU
,
Xiaowei WANG
材料科学技术（英文）
The effect of interstitial hydrogen on the cohesion of the Al ∑=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.
关键词:
Hydrogen
,
null
,
null
Physical Review B
By use of the linear-combination-of-atomic-orbital (LCAO) method for a cluster model, we studied the electronic structure of gamma-from Sigma 11 [1 (1) over bar0](11 (3) over bar) grain boundary doping with N and Mn atoms. The effect of the segregation on the cohesion of the grain boundary is investigated based on the Rice-Wang thermodynamic model. It is found that N could not only largely enhance the cohesion of the grain boundary but also eliminate the detrimental effect of Mn. The cosegregation effect of Mn and N on the cohesion of the grain boundary depends on where they segregate. Nitrogen could be reliably used in alloyed steels as an efficient strengthening element.
关键词:
electronic-structure;phosphorus segregation;stainless-steel;embrittlement;austenite;nitrogen;boron;impurities;fracture;metals
Journal of Physics and Chemistry of Solids
The layered ternary ceramics Ti3SiC2 and Ti3AlC2 are isostructural and can form Ti3Si1-xAlxC2 solid solutions combining the advanced properties of both compounds [H.B. Zhang, Y.C. Zhou, Y.W. Bao, M.S. Li, Improving the oxidation resistance of Ti3SiC2 by forming a Ti3Si0.90Al0.1C2 solid solution, Acta Mater. 52 (2004) 3631-3637; E.D. Wu, J.Y. Wang, H.B. Zhang, Y.C. Zhou, K. Sun, Y.J. Xue, Neutron diffraction studies of Ti3Si0.9Al0.1C2 compound, Mater. Lett. 59 (2005) 2715-2719; J.Y. Wang, Y.C. Zhou, First-principles study of equilibrium properties and electronic structure of Ti3Si0.75Al0.25C2 solid solution, J. Phys.: Condens. Matter 15 (2003) 5959-5968; Y.C. Zhou, J.X. Chen, J.Y. Wang, Strengthening of Ti3AlC2 by incorporation of Si to form Ti3Al1-xSixC2 solid solutions, Acta. Mater. 54 (2006) 1317-1322]. In the present work, the solid solutions of Ti3Si1-xAlxC2 (x = 0, 0.25, 0.33, 0.5, 0.67, 0.75, 1) are investigated by first-principle calculations based on pseudo-potential plan-wave method within the density functional theory framework. The results show that as Al content increases in the solid solution, all the bonds have weakened to certain extents, which lead to an unstable structure both energetically and geometrically. The calculated results are compared and discussed with the reported data for the Ti3Si1-xAlxC2 solid solutions. (c) 2007 Elsevier Ltd. All rights reserved.
关键词:
ceramics;ab initio calculations;electronic structure;electrical;conductivity;oxidation behavior;mechanical-properties;ti3sic2;temperature;ti3alc2;air;si
魏洪亮
,
杨晓光
,
于慧臣
材料工程
doi:10.3969/j.issn.1001-4381.2005.04.011
针对涡轮盘用GH4169合金开展了高温下单调拉伸、对称循环及非对称循环的实验工作,结果表明,该材料具有比较明显的循环软化和平均应力松弛特性.采用带Ohno/Wang修正的Chaboche粘塑性理论本构方程,对其表现出的复杂力学现象进行本构建模,介绍了Levenberg-Marquadt非线性优化算法,结合材料实验数据并通过该算法识别了本构方程参数,将本构方程通过用户子程序嵌入到有限元软件ABAQUS中,对GH4169合金的上述实验现象进行了数值模拟,计算曲线与实验曲线取得了较好的一致性.
关键词:
循环软化
,
平均应力松弛
,
本构方程
,
参数识别
