Y Huang
,
H.N Hao
,
Y.L. Chen and B.L.Zhou (1)Department of Materials Science and Engineering
,
Tsinghua University
,
Beijing 100084
,
China 2)Institute of Metal Research
,
Chinese Academy of Sciences
,
Shenyang 110015
,
China Manuscript received 26 August 1996)
金属学报(英文版)
A new way of designing and preparing silicon nitride ceramic composite with high fracture toughness and nacre structure has been proposed. To mimic the laminated structure of nacre, Si_3N_4 matrix ceramic layer can be obtained through compacting rolling method. To mimic the secondary toughening of nacre structure, SiC whisker is added into Si_3N_4 and acts as the secondary toughening phase. Boron nitride (BN)is selected to mimic the organic layer in nacre so as to form the weak interfaces between Si_3N_4 layers. Alumina is added into BN to adjust the bonding strength of the interface.The Si_3N_4 sheets are stacked into the die after coating with BN. After the removal of the organic matter in them, the green body is hot pressed at 1820℃for 1.5 hours under N_2 atmosphere. The fracture toughness of the so-made Si_3N_4 composite at room temperature is 20.36MPa m~(1/2), the three-point bending strength at room temperature is 651.47MPa. The crack spreads and deflects along the interface between BN and Si_3N_4 layer and extends through the BN layer into Si_3N_4 layer. The improvement of the fracture toughness may be due to the staircase-shape-like crack which provides the long crack path, the fracture and deformation of Si_3N_4 layer, and the pullout of SiC whiskers from the Si_3N_4 layer.
关键词:
:secondary toughening
,
null
,
null
,
null
MA Zongyi YAO Zhongkai Harbin Institute of Technology
,
Harbin
,
China
金属学报(英文版)
The SiC_w/Al composite prepared by squeeze casting has a combination of superior room temperature specific strength and modulus together with excellent thermal properties.The extrusion can make an improvement on the strength and ductility of the composite from 582 MPa as squeeze casted up to 639 MPa,and on the transformation from isotropic to the anisotropic structure.This seems to be explained by the orientation of whiskers and the densification of dislocations in matrix.TEM observation indicates that the stacking fault is the usual planar defect on the SiC_w surface. composite;;SiC whisker;;Al alloy;;microstructure
关键词:
composite
,
null
,
null
,
null
B.W. Wang
,
H. Shen
金属学报(英文版)
Ni-Cr System solar selective thin solid films were prepared by d.c. magnetron reactivesputtering under the atmosphere of O2 and N2. Ni-Cr alloy was chosen as targetmaterial and copper sheets as substrate. Using SEM, Spectrophotometer and Talystepto analyze the relations between the selective characteristic and the structure, theformation and the thickness of the thin films. The aim is to obtain good solar selectivethin films with high absorptance and low emittance, which is applied to flat plate solarheat collectors.
关键词:
solar selective thin film
,
null
,
null
,
null
Applied Physics Letters
The dielectric resonance and multiple magnetic resonances which correspond to multiple microwave absorptions in the 2-18 GHz range have been studied in the composite Fe/TiO(2). The Fe grain size is found to have great impact on the dielectric resonance in this metal-semiconductor composite. The polarization mechanism is attributed to interfacial polarization. The multiple magnetic resonances can be ascribed to the natural resonance and exchange resonances, which can be explained by Aharoni's exchange resonance theory. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3496393]
关键词:
ferromagnetic particles;carbon nanotubes;absorption;permeability
Corrosion
This paper introduces the design of a localized corrosion rate monitoring instrument that can monitor and evaluate the maximum and stable localized corrosion rate of a nonpassivable metal in a corrosive environment by measuring the current density in a corrosion sensor with an occluded anode.
关键词:
instrument;localized corrosion rate;monitor
