H. Yu
,
Z.X. Lin and Y.H. Zhou 1) Department of Materials Engineering
,
Nanchang Institute of Aeronautical Technology
,
Nanchang 330034
,
China 2) The State Key Laboratory of Solidification Processing
,
Northwestern Polytechnical University
,
Xi'an 710072
,
China
金属学报(英文版)
Based on the principle of infiltration mechanics in porous medium, high Reynolds number infiltration of liquid aluminum in porous medium has been investigated. Combined with the test results of hydraulic simulation, the mathematical model of the high Reynolds number infiltration of liquid aluminum in porous medium has been established, and it is found that infiltration is characterized by its second order nonlinear. The calculated results based on the model are in good agreement with those of the hydraulic simulation and the aluminum alloy infiltration. The way of high speed infiltration under medium pressure has been put forward to fabricate porous aluminum alloy with thin holes of 0.4mm diameter.
关键词:
infiltration
,
null
,
null
Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
The microstructural evolution during solidification and subsequent solid-state transformation of AISI 304 stainless steel is studied by directional solidification and quenching methods in this paper. The phase transformation sequence in the steel directionally solidified is that the precipitation of primary ferritic dendrites, ferrite-austenite eutectic reaction, and the direct formation of austenite occur in sequence during the directional solidification of the austenitic stainless steel. At the eutectic reaction stage, plenty of columnar and cellular eutectic colonies composed of the coupled growth of lamellar ferrite and austenite take place. During the course of subsequent solid-state transformation, austenite grows into ferrite gradually, resulting in the disappearing of eutectic colonies and thinning of primary ferritic dendrites, and dendrite cores of primary ferrite are retained as the final skeletal ferrite in the final microstructure. (c) 2006 Elsevier B.V. All rights reserved.
关键词:
austenitic stainless steel;directional solidification;eutectic colony;austenitic stainless-steel;cr-ni alloys;sequence;welds
Wenjing Yao
材料科学技术（英文）
The liquid-solid transitions of (Co2Si+CoSi) and (CoSi+CoSi2) eutectic alloys were realized in drop tube and the rapid eutectic growth mechanism of intermetallic compounds was examined. The experimental and calculated results indicate that with increasing Co content, the intermetallic compound prefers nucleating primarily. The eutectic microstructures experience the transitions of `lamellar-anomalous-divorced' eutectic with undercooling. In undercooled state, the growth of CoSi intermetallic compound always lags behind others, and no matter how large the undercooling is, this intermetallic compound grows under the solutal diffusion control. The calculated coupled zone demonstrates that (Co2Si+CoSi) eutectic can form within certain undercooling regime, when the composition is in the range from 23.6% to 25.4% Si. And the calculated coupled zone of (CoSi+CoSi2) covers a composition range from 40.8% to 43.8% Si.
关键词:
Liquid-solid transition
Xiaoli WANG
,
Lucun GUO
材料科学技术（英文）
The relationship between processing route and suspension stability in ZrO2-H2O-PANH4 system was investigated through rheology study. The work showed that two suspensions with identical PANH4 concentration and final solution condition but prepared by different routes differed greatly in stability. This behavior is attributed to their different distribution state of PANH4 on ZrO2 surface that is determined by the adsorption affinity depending on pH condition in solution. High affinity at pH 5.0 induces a nonuniform distribution of soluble PAA－ (polyacrylicacid) on particle surface, which can flocculate the suspension strongly, while low affinity at pH 9.0 induces an uniform distribution of polymer so that the higher stabilization can be achieved. A simple mathematical model was used to account for the observed results.
关键词:
Zirconia
,
制备途径
,
稳定性
,
流变性
Yang LUO
材料科学技术（英文）
Due to continued growth in key markets, a broadening of application base and performance improvements, the market demands of NdFeB magnet increased steadily in 1998, and the global output of sintered NdFeB magnet exceeded 10,000 t, in spite of the economic recession in Asia. In 1998 China produced 3,850 t sintered NdFeB block magnet, with an annual growth rate of +22% over the output in 1997.
关键词:
