Y.J. Zhang
,
X.H. Li
,
S. Wang
,
K.Y. He
金属学报(英文版)
At different annealing temperatures, the saturation magnetostrictions and the correlation between the permeability μi and the temperature T(μi-T curves) of the Co66Fe4Mo2Si16B12 alloy were investigated using a small-angle magnetization tester and core tester. The experimental results showed that the μi-T curves had different shapes at different ranges of annealing temperature; the permeability μi of the alloy improved with increasing the annealing temperatures below 460℃; when the alloy was annealed above 480℃, the poor magnetic properties were considered to be caused by larger saturation magnetostriction.
关键词:
Co66Fe4Mo2Si16B12 alloy
,
null
,
null
ZHANG Lei WANG Peixuan TAO Rong MA Ruzhang ZHANG Guoguang University of Science and Technology Beijing
,
Beijing
,
China professor
,
Department of Materials Physics.University of Science and Technology Beijing.Beijing 100083
,
China
金属学报(英文版)
Nucleation and growth of He bubbles at different annealing temperatures T≤1023 K in stain- less steels HR-2 and SS321,implanted with He~+(40-70 keV.1×10~(16)-6× 10~(17) He~+/cm~2),were ohserved under TEM.T=0.45T_m seems to be a transition temperature.The He bubbles continue mainly their nucleation at 0.3T_m< T<0.45T_m,and grow predominantly at T≥0.45T_m,due probably to migration and coalescence by surface diffusion of metal atoms around the bubbles.The apparent activation energies for the growth are found to he 0.41 and 0.31 eV for HR-2 and SS321 respectively.The bubble density in HR-2 is greater than that in SS321 within whole measuring temperature range,and the onset temperature of rapid swelling is also higher.It is believed that the resistance of HR-2 to He is superior to that fo SS321.
关键词:
stainless steel
,
null
,
null
,
null
,
null
于萍
,
王亚权
腐蚀科学与防护技术
研究了添加0.1mass%稀土Y的铸造K38G高温合金在1000℃的恒温氧化行为.结果表明,较之不含Y的合金，含Y铸态K38G合金的氧化速率显著降低； 氧化时形成双层的外氧化膜，表层为以Cr2O3和TiO.2为主的混合氧化物层，内层为连续的Al2O3层；没有内氧化和内氮化，没有氧化膜的剥落，加入稀土Y有效地提高了氧化膜的粘附性能.
关键词:
高温氧化
,
null
,
null
,
null
于萍
,
王亚权
腐蚀科学与防护技术
doi:10.3969/j.issn.1002-6495.2007.03.010
研究了添加0.1 mass%稀土Y的铸造K38G高温合金在1000℃的恒温氧化行为.结果表明,较之不含Y的合金,含Y铸态K38G合金的氧化速率显著降低;氧化时形成双层的外氧化膜,表层为以Cr2O3和TiO2为主的混合氧化物层,内层为连续的Al2O3层;没有内氧化和内氮化,没有氧化膜的剥落,加入稀土Y有效地提高了氧化膜的粘附性能.
关键词:
高温氧化
,
K38G
,
高温合金
,
稀土元素
,
Y
Journal of Nuclear Materials
Due to its inert reactivity with almost elements, He-3 produced from tritium decay has extremely detrimental effects on the tritide. To refrain from this He-3-induced damage, an efficient way is to increase the stability of He-3 in metal tritide by alloying. Using a first-principles discrete variational method in two cluster models, one for a low He-3 concentration and the other for a high He-3 concentration, the authors study the alloying effect of 3d and 4d transition metals on the stability of He-3 in TiT2 system. It is found that the preferring and metastable sites of He-3 are affected by He-3 concentration : He-3 prefers to stay at original tetrahedral interstitial site when He-3 concentration is low but moves to octahedral site when He-3 concentration is high enough. A criterion of alloying effect is proposed, according to which Nb, Y, Zr, Pd, Ru, Tc, Rh, Cr, Mo and Ag are suggested to be the beneficial alloying elements for increasing the stability of He-3 in the alloyed TiT2 with a low He-3 concentration and Y, Nb, Mo, Zr, Cr, Tc, Ru, Rh and Cu for that with a high He-3 concentration. Our results of alloying effect are supported by the positron annihilation spectroscopy (PAS) measurements for He-implanted Ti, TiMoYAl and TiZrYAl films. (c) 2006 Elsevier B.V. All rights reserved.
关键词:
electronic population analysis;molecular wave functions;hydrogen;storage alloys;intermetallic hydride;bubble formation;iron clusters;helium;tritides;lcao;overlap
于萍
,
王亚权
,
王文
腐蚀科学与防护技术
对加入0.05mass%～0.5mass%稀土Y铸造的K38G高温合金800 ℃恒温的氧化行为进行了研究.结果表明,含Y铸态K38G合金的氧化动力学曲线偏离了抛物线规律，接近于立方规律；Y有效抑制了该合金的内氧化；当Y含量达0.5mass%时，该合金中析出富Y相，降低了其氧化抗力.
关键词:
高温氧化
,
null
,
null
金玉花
,
韩萍花
,
李常锋
,
寇生中
材料工程
doi:10.11868/j.issn.1001-4381.2016.03.008
采用高真空电弧熔炼炉熔炼,制备了K418镍基高温合金.借助SEM对合金的组织进行观察,用EDS对合金中的相成分进行分析,研究了稀土元素Y,Ce对合金中气孔缺陷、γ'相以及(γ+γ')共晶相等的影响.结果表明:添加稀土元素明显减少了合金中的气孔缺陷,提高了合金的致密度,细化了合金枝晶组织.组织中碳化物的形态由大块状变为链状和小块状,γ'相尺寸变小且颗粒数目增多.Y元素的加入能使合金中的(γ+γ')共晶相数目增加.但同时加入Y,Ce两种稀土元素后共晶相数目的增加更为显著.
关键词:
K418合金
,
稀土元素
,
γ'相
,
共晶相
谢莎
,
邓爱红
,
王康
,
王玲
,
李悦
,
王勇
,
汪渊
材料研究学报
用磁控溅射方法制备纳米多晶钨膜,采用x射线衍射(XRD),扫描电子显微镜(SEM),弹性反冲探测(ERD)和慢正电子束分析(SPBA)等手段研究了在高能He+和H+依次对其辐照后He相关缺陷对H滞留的影响.结果表明,注He+钨膜在退火后从β型钨向α型钨转变；钨膜中的He含量随着退火温度的提高而减少,在873 K退火加剧钨膜中He原子的释放,且造成钨膜空位型缺陷的增加和结构无序度的提高；钨膜中的H滞留总量随着He滞留总量的减少略有下降.
关键词:
金属材料
,
磁控溅射钨膜
,
慢正电子束分析
,
H
,
He
