李翱
,
江波
,
许澍华
,
岳巍
高分子材料科学与工程
通过混炼三要素的分析,对自行开发研制的串联式磨盘螺杆挤出机的混炼机理进行了研究,以聚合物/纳米无机物体系混炼为结合点,与同向平行双螺杆混炼挤出机的混炼效果进行了对比,实验结果表明,该机种具有极好的混炼性能,在高聚物混炼加工领域中具有十分广阔的应用前景.
关键词:
串联式磨盘螺杆挤出机
,
混炼机理
,
混炼效果
陈祖良
,
李兆龙
,
王华明
,
岳巍
,
章月红
,
谢裕颖
人工晶体学报
应用1.4 MeV电子束对单向可控硅晶圆芯片进行固定注量率辐照，通过触发电流和少子寿命表征辐照效应，研究了退火工艺对辐照效应的影响。结果表明：电子辐照缩短单向可控硅少子寿命，增大触发电流。经350℃退火后触发电流恢复到辐照前水平，少子寿命虽有一定恢复，但远比辐照前短。在试验的注量范围内k系数为常数，退火后k系数与注量相关，小注量时较小。常温存放对辐照效应有较大影响，长时间存放不利于200℃退火而有利于300℃退火。
关键词:
单向可控硅
,
电子辐照
,
触发电流
,
少子寿命
,
退火工艺
王延东
,
杨笑宇
,
洪伟
,
贾平
,
晁宇
表面技术
doi:10.3969/j.issn.1001-3660.2009.01.029
通过对涂层的形成原理及失效方式、耐腐蚀寿命、结合力、涂装施工工艺和防腐涂层维护5个方面进行对比,分析了油漆和电弧喷铝涂装方案的特点.针对荆岳大桥所处的腐蚀环境,指出在钢箱梁防腐蚀施工中,电弧喷铝比油漆重防腐方案具有更优秀的防腐蚀效果,进而说明电弧喷铝防腐涂装能够更广泛地应用到钢结构防腐施工中.
关键词:
大桥
,
钢箱梁
,
油漆重防腐
,
电弧喷铝
工程热物理学报
根据《吴仲华奖励基金章程》（吴奖[2008]01号），经各高等院校、中国工程热物理学会和中国科学院工程热物理研究所认真评选和推荐，吴仲华奖励基金理事会评审并确定授予青年学者戴巍、罗坤、唐桂华“吴仲华优秀青年学者奖”，授予程雪涛等10位同学“吴仲华优秀学生奖”。
关键词:
基金
,
奖励
,
评选
,
获奖者
,
中国科学院
,
青年学者
,
物理研究所
,
高等院校
火时中
,
翁端
,
唐纯义
腐蚀学报（英文）
<正> 孔蚀形态主要包括孔蚀产物在孔口与孔内的聚集状况,孔口及孔内側壁的形状与尺寸芯靠资葱翁哂欣砺垡庖搴褪涤眉壑怠T诳资葱翁矫娴难芯肯喽岳此狄傩R丫?孔蚀生长初期的形态主要与金属晶体结构和蚀孔所处的位置有关。Vetter和strehblow发现,当蚀孔位于不同的晶粒上时。其边缘具有不同的晶向,处
关键词:
金属学报(英文版)
桑危郑牛樱裕桑牵粒裕桑希巍。希啤。龋伲模遥希牵牛巍。桑危模眨茫牛摹。模眨茫裕桑蹋拧。拢遥桑裕裕蹋拧。裕遥粒危樱桑裕桑希巍。桑巍。罚保罚怠。粒蹋眨停桑危眨汀。粒蹋蹋希?##2##3##4##5INVESTIGATIONOFHYDROGENINDUCEDDUCTILEBRITTLETRANSITIONIN7175ALUMINUMALLOY$R.G.Seng:B.JZhong,MG.ZengandP.Geng(DepartmentofMaterialsScierce,ScienceCollege,NorthearsternUniveisity,Shenyang110006,ChinaMaruscriptreceived4September1995inrevisedform20April1996)Abstrac:Effectsofhydrogenonthemechanicalpropertiesofdifferentlyaged7175aluminumalloyswereinvestigatedbyusingcathodicH-permeation,slowstrainratetensionandsoon.Theresultsindicatethatboththeyieldstressandthepercentagereductionofareadecreasewithincreasinghydrogenchargingtime,andthedegreeofreductiondecreasesasagingtimeincreasesforthesamehydrogenchargingtime.Keywords:hydrogeninducedductile-brittletransition,7175aluminumalloy,mechanicalproperty,cathodicH-permeation1.IntroductionForalongtimehydrogenembrittlementproblemwasthoughttobeabsentinhighstrengthaluminiumalloybecausethesolutiondegreeofhydrogeninaluminumatcommontemperatureandpressureisverysmall.However,hydrogenembrittlementphenomenonwasfoundinaluminumalloyduringtheinvestigationofstresscorrosionandcorrosionfatigue[1-5].Therehavebeenonlyafewreportsofhydrogeninducedsofteningandhardening.Inthispaper,theeffectsofhydrogenonmechanicalpropertiesof7175aluminumalloywereinvestigatedbyusingcathodicalchargingwithhydrogenandslowtensiontests.2.ExperimentalProcedureTheexperimentalmaterialwas7175aluminumalloyforgingintheformofa43mminthicknessandwithcomposition(wt%).5.41Zn,2.54Mg.1.49Cu,0.22Cr,0.1Mn.0.1Ti,0.16Fe.0.11Si,balancedbyA1.Alloyplateof1.5mminthicknesswasobtainedbyhot(465℃)andtoldrollingto83%reductioninthickness.Thelongaxisofhydrogenchargedspecimensisalongtherollingdirection.Allspecimensweresolidsolutionedat480℃for70min,followedtyimmediatequenchinginwaterandthenagedat140℃for6h(A),16h(B)and98h(C).Thetreatmentof6hiscorrespondingtotheunderagedstate.16hthefirstpeak-agedstateand98hthesecondpeak-agedstate.Thespecimenswerepolishedsuccessivelyusingemerypaperbeforehydrogencharging.Thetensilespecimenswerecathodicallychargedina2NH_2SO_4solutionwithasmallamountofAs_2O_3forpromotinghydrogenabsorption,andwithacurrentdensityof20±1mA/cm￣2atroomtemperature.ThehydrogencontentanalysiswascarriedoutonanLT-1Amodelionmassmicroprobeafterthesputteringdepthreached8nm.Theioncurrentsofhydrogenandaluminuminvariousagedstateswererecordedunderthesamecondition.ThetensiletestswereperformedonanAG-10TAmodeltestmachinewhichwascontrolledbycomputer.3.ExperimentalResultsTheratioofioncurrentstrengthofhydrogentoaluminumisrelatedtohydrogenconcentrationinhydrogenchargedspecimen.TheresultswereshowninTable1Thehydrogencontentincreaseswiththeincreaseincharingtime.Ofthethreeagedstates,theunderagedspecimenhasthehighesthydrogencontent.Theratioofyieldstrengthofhydrogenchargedandunchargedspecimenschangeswithhydrogenchargingtime,asshowninFig.1Itcanbeseenthattheyieldstrengthofhydrogenchargedspecimendecreasewithincreasinghydrogenchargingtime.Atthesamechargingtime,theyieldstressdecreasestheleastinthesecondpeak-agedstate,anddecreasesthemostintheunderagedstate.Itindicatesthattheunderagedspecimenismostsensitivetohydrogeninducedsoftening,whichisconsistentwiththeresultsofanotherhighstrengthaluminumalloy[6].TherelativechangesoftheradioofreductionofareawithhydrogenchargingtimearesummarizedinFig.2,whereΨ￣0andΨ￣Harethepercentagereductionofareaofthesamplewithoutandwithhydrogenchargingrespectively.Theradioofreductionofareareduceswhenhydrogenchargingtimeincreases,andthedecreasingdegreeofreductionofareaincreaseswithincreasingagingtime,ie,,theunderagedstateisthemostsensitivetohydrogenembrittlement.4.DiscussionItisknownfromtheresultsabovethatcathodicalchargingwithhydrogenleadstotheobviousdecreaseinthetensilestrengthandplasticityThisisbecausealargeamountofsolidsolutionhydrogenentersthespecimenintheprocessofhydrogenchargingSolidsolutionhydrogenisliabletoenterthecentreofdislocationundertheactionofdislocationtrap,henceraisingthemovabilityofdislocation.Thereforethedislocationsinhydrogenchargedspecimenmoveeasierthaninunchargedspecimen.soresultinginthereductionofyieldstrength[7].Whendislocationstartstomove,thecrystallatticeresistance(P-Nforce)whichitmustovercomeisgivenby:whereμismodulusofshear,visPoissonratio,aisspanofslipplane,bisatomspanofslipdirection.Moreover.theotherresistanceofdislocationmotionmayarisefromtheelasticinteractionofdislocation,theactionwithtreedislocationandetc.,itcanbeexpressedasfollows:whereαisconstant,XisdislocationspanSotheresistanceofdislocationmotioncanbewrittenasfollows:Becausehydrogenatomsreducetheatombondingstrengthafterhydrogencharging,shearmodulusμdecreasesandresultsinthereductionoff,therebytheyieldstressdecreases.Asthecentreofdislocationistheseriousdistortionzoneoflattice.thestresscanberelaxedafterhydrogenatomstuffing,andthesystemenergydecreases.Thusthecentreofdislocationisastrongtrapofhydrogen[8].Therefore,amovabledislocationcaptureshydrogenandmigratestograinboundaries.phaseboundariesorsurfaceofthespecimen,promotingthecrackiesformationandgrowth,thuscausingthelossofplasticity.Sincethelocalenrichmentofhydrogenisrealizedbydislocationtransporting(inthestageofdeformation),thelargerthereductionofyieldstress.theearlierarehydrogenatomstransportedtotheplaceofenrichment.Inaddition,thedamageofatombondingstrengthinducedbyhydrogenmakesthefracturestressdecrease[9]:whereCHishydrogenconcentration.σ_thisfracturestrengthbeforehydrogenchargingandisfracturestrengthafterhydrogencharging.Eq.(4)showsthatthematerialsmaybefracturedatalowerstraini.e.,brittlefractureoccurs.5.Conclusions(1)Hydrogencontentofdifferentlyagedspecimensincreaseswithincreasinghydrogenchargingtimethecapabilityofthealloytoabsorbhydrogeninunderagedstateisthestrongest.(2)Theyieldstressaswellasthepercentagereductionofareaof7175aluminumalloydecreaseashydrogenchargingtimeincreasesundervariousagedstates.(3)Underagedstateismostsensitivetohydrogeninducedsofteningandhardening.(4)Anexplanationwasofferedforthephenomenonofhydrogeninducedsofteninginthestageofdeformation,andhardeninginthestageoffracture.REFERENCES｜｜1G.KKock,Corrosion35(1979)73.2M.K.TsengandH.LMarcus,Scr.Metall.15(1981)427.3PSFao.M.GaoandR.P.Wei,Scr.Metall.19(1985)265.4R.G.SongandM.K.TsengJ.NortheasternUniversity15(1994)5(inChinese).5R.K.Viswanadham,T.S.sunandJ.A.S.Green,Metall.Trans.11A(1980)85.6J.Liu,M.KTsengandB.R.Liu.NonferrousMiningandMetallrgy5(1989)33(inChinese).7LChen,WXChen,ZHLiuandZ.Q.Hu,InFrocofthe1stNationalConfonAl-LiAlloys(Sheryang.China,1991)p.328(inChinese).8Z.HLiuL.ChenW.XChenY.X.ShaoandZ.Q.Hu,InProc.ofthe1stNationalConfonAl-LiAlloys(Shenyang,China,1991)p.334(inChinese).9R.A.OrianiandF.H.Josephic,ActaMetall.22(1974)1065.##61G.KKock,Corrosion35(1979)73.2M.K.TsengandH.LMarcus,Scr.Metall.15(1981)427.3PSFao.M.GaoandR.P.Wei,Scr.Metall.19(1985)265.4R.G.SongandM.K.TsengJ.NortheasternUniversity15(1994)5(inChinese).5R.K.Viswanadham,T.S.sunandJ.A.S.Green,Metall.Trans.11A(1980)85.6J.Liu,M.KTsengandB.R.Liu.NonferrousMiningandMetallrgy5(1989)33(inChinese).7LChen,WXChen,ZHLiuandZ.Q.Hu,InFrocofthe1stNationalConfonAl-LiAlloys(Sheryang.China,1991)p.328(inChinese).8Z.HLiuL.ChenW.XChenY.X.ShaoandZ.Q.Hu,InProc.ofthe1stNationalConfonAl-LiAlloys(Shenyang,China,1991)p.334(inChinese).9R.A.OrianiandF.H.Josephic,ActaMetall.22(1974)1065.##A##BINVESTIGATION OF HYDROGEN INDUCED DUCTILE BRITTLE TRANSITION IN 7175 ALUMINUM ALLOY$$$$R.G.Seng: B.J Zhong, MG. Zeng and P. Geng(Department of Materials Scierce, Science College,Northearstern Univeisity, Shenyang 110006, China Maruscript received 4 September 1995 in revised form 20 April 1996)Abstrac:Effects of hydrogen on the mechanical properties of differently aged 7175 aluminum alloys were investigated by using cathodic H-permeation, slow strain rate tension and so on. The results indicate that both the yield stress and the percentage reduction of area decrease with increasing hydrogen charging time, and the degree of reduction decreases as aging time increases for the same hydrogen charging time.
关键词:
:hydrogen induced ductile-brittle transition
,
null
,
null
,
null
中国材料进展
2011年8日下午，何梁何利基金2011年度颁奖大会在京举行。我国高性能计算机领域杰出科学家、国防科技大学杨学军教授荣获“科学与技术成就奖”，丁伟岳等35人获“科学与技术进步奖”，吴朝晖等15人获“科学与技术创新奖”。中共中央政治局委员、国务委员刘延东向大会发来贺信，全国人大常委会副委员长桑国卫、全国政协副主席万钢出席会议并为获奖代表颁奖。何梁何利基金评选委员会主任朱丽兰向大会作工作报告。
关键词:
科学家
,
基金
,
中共中央政治局
,
全国人大常委会
,
突出
,
国防科技大学
,
计算机领域
,
科学与技术
李亚江
,
王娟
,
尹衍升
,
马海军
金属学报
doi:10.3321/j.issn:0412-1961.2005.02.008
对Fe3Al/18-8钢扩散焊界面附近元素的分布进行计算并通过电子探针(EPMA)进行实验测定,结果表明,界面附近靠近18-8钢一侧,其Al,Ni元素的计算值和实测值有所差别,Fe,Cr元素分布的计算值和实测值较为接近.加热温度1333 K时,Cr元素在Fe3Al/18-8钢界面附近扩散距离增加至80μm,Ni元素扩散距离增加至140μm.Fe3Al/18-8钢扩散焊界面过渡区宽度为x2=7.5×102exp(-75.2/RT)(t-t0).在一定加热温度下,保温时间超过60 min以岳界面过渡区宽度不再明显增加.
关键词:
Fe3Al金属间化合物
,
扩散焊
,
界面
,
元素扩散
金属学报(英文版)
粒裕希停桑谩。疲希遥茫拧。停桑茫遥希樱茫希校佟。希拢樱牛遥郑粒裕桑希巍。希啤。停粒牵危牛裕遥希巍。樱校眨裕裕牛遥牛摹。粒蹋眨停桑危眨停樱桑蹋桑茫希巍。粒蹋蹋希佟。疲桑蹋停?##2##3##4##5ATOMICFORCEMICROSCOPYOBSERVATIONOFMAGNETRONSPUTTEREDALUMINUM-SILICONALLOYFILMSJ.W.Wu,J.H.FangandZ.H.Lu(NationalLaboratoryofMoleculeandBiomoleculeElectronics,SoutheastUniversity,Nanjing210096,ChinaManuscriptreceived27October1995)Abstrcat:Twodifferentsurfacemorphologycharacteristicsofmagnetronsputteredaluminumsilicon(Al-Si)alloyfilmsdepositedat0and200℃wereobservedbyatomicforcemicroscopy(AFM).Oneisirregularlyshapedgrainsputtogtheronaplane.TheotherisirregularlyshapedgrainsPiledupinspace.Nanometer-sizedparticleswithheightsfrom1.6to2.9nmwerefirstobserved.Onthebasisoftheseobservationsthegrowthmechanismofmagnetronsputteredfilmsisdiscussed.Keywords:magnetronsputtering,Al-Sialloy,surfacemorphology,atomicforcemicroscopy,filmgrowthmechanism1.IntroductionTheuseofaluminumalloys[1,2],inparticularAl-Si,isacommonfeatureinmanysinglelevelandmultilevelinterconnectionschemesadoptedinthemanufactureofmicroelectronicdevicesbecauseofseveraldesirableproperties.TheAl-Sigrainmorphology(size.geometryanddistributionofgrainsisassociatedwithstepcoverage[3],electromigration[4]andinterconnectsresistivity[5]etc..Thus,characterizationofAl-Sialloysurfacemorphologyisveryimportant,especiallywhenintegratedintensityincreasesandlinewidthsof0.3to0.5μmbecomecommon.Inthepasttwentyyears,theAl-Sialloysurfacemorphologywhichaffectsthereliabilityofmicroelectronicdeviceshasbeenwidelyinvestigatedbyscanningelectronmicroscopy(SEM),transmissionelectronmicroscopy(TEM)etc.[5-7].However,SEMandTEMhavetheirlimitationorinconvenience,forexample,theverticalresolutionofSEMisnothighandTEMneedscomplexsamplepreparation.Recently,anewgrainboundaryetchingmethodwasproposed￣[8]whichalsoneedstroublesomechemicaletching.Atomicforcemicroscopy(AFM),sinceitsemerging,hasbecomemoreandmoreusefulinphysics,chemistry,materialsscienceandsurfacescience,becauseofitshighresolution,easeofsamplepreparationandrealsurfacetopography.Recently,discussion[9,10]waspresentedonhowAFMwillplayaroleinsemiconductorindustry.Asaresponsetothisdiscussion,weusedAFMtoinvestigateAl-SialloysurfacemorphologyandhaveobtainedsomeresultswhichcannotberevealedbySEMorTEM.ThisindicatesthatAFMisagoodcharacterizationtoolinsemiconductorindustry.2.SamplePreparationInourexperiments,aluminumwith30ppmsiliconwassputteredonsiliconsubstrateinbatchdepositionmodeAllthreefilmswiththicknessof1.6μmweredepositedusinganargonsputteringpressureof4.2×10￣-3Pa.TheotherdepositionparametersaredescribedinTable1.Thesubstratewascleanedusingstandardpremetallizationcleaningtechniquespriortofilmdeposition.3.ExperimentalResultsandDiscussionTheAFMmeasurementswereperformedonacommercialsystem(NanoscopeIII,DigitalInstruments,SantaBarbara).Thetipismadeofmicrofabricatedsiliconnitride(Si_3N_4)Itisattachedtoa200μmcantileverwithaforceconstantofabout0.12N/m.Beforethesurfaceofsamplewasexamined.agoodtipwithananometer-sizedprotrusionatitsendwasselectedbeforehand,whichcanbeobtainedbyimagingtheatomicstructureofmicasubstrateandagoldgrid.AtypicaloperatingforcebetweenthetipandAl-Sisamplesurfaceisoftheorderof10￣-8Nandallimagesweretakenatroomtemperatureinair.AtypicaltopographicviewoftheAl-SifilmsisshowninFig.1(allimagescansizeis5by5μma,bandcarerespectivelyforsample1,2,and3).FromFig.la,itcanbeseenthatirregularlyshapedgrainstiltinginvaryingdegreespileupinspace,andgroovesamongtheirregularlyshapedgrainsaredifficulttodecideatacertainarea(wedefineitascharacteristicA).Toourknowledge,onreportsonthesurfacemorphologyhavebeenpresentedbefore.InFig1b,however,irregularlyshapedgrainsassembleonaPlaneandgroovesamongtheirregularlyshapedgrainsareeasytodecide(wedefineitascharacteristicB),whichisinagreementwithmanypreviousreports[5-7].InFig.1c,bothcharacteristicA(arrowA)andcharacteristicB(arrowB)wereobserved.IndoingAFMexperiments,weselectedfivedifferentscanareastobeimagedforeachsampleandfoundthatallimagesofeachsamplearerespectivelysimilartoFig.1a,bandc.Also,wenotedthatthesurfaceofinFig.1a.WethinkthatdepositionparameterswillinfluenceAl-Sisurfacemorphology,andthetiltedgrainsmaybesusceptibletomicrocracking.Byreducingthescansizeareato2by2μm(Fig.2aandb).Weobtainedmanyidenticalresultsasdescribedabove,suchasirregularlyshapedgrainsetc.Forthefirsttime,wefoundnanometersizedparticlesonirregularlyshapedgrainsurfacewhichcannotberevealedbySEMbecausethediameterofthesenanoparticlesisabout10nmandtheheightofthesenanoparticlesisintherangeof1.6to2.9nm.Inimaging,wenotedthatrotatingthescandirectionandchangingthescanfrequencydidnotaffectthestructureofthesegrainsasshowninFig.2aandb,rulingoutthepossibilitythatscanninginfluencedtheshapeoftheseparticlesorcausedsomesimilarimagingartifacts.Also,wenotedthatthenanoparticleswerenotobservedontheslopesofthegrooves(Fig.2aandb).Thisphenomenoncanbeexplainedasfollows:thepotentialenergyattheslopeislargerthanthatelsewhere,sotheparticlesseemmorelikelytobedepositedontheseareaswithlowerpotentialenergy.Fig.2c,scansize250by250nm,isazoomtopographicimage(whiteoutlineinb).Itshowsunevendistributionofthenanoparticles.Andtheheightdifferenceofthenanoparticlesindicatesdifferentgrowingspeed.Wethinkbasedonthemorphologyofnanoparticles,thattheheightdifferenceandunevendistributionofthesenanoparticlesshowdifferentgrowingadvantageandindicatethatatomshaveenoughenergytomovetoasuitablegrowingspot.Theenergymaybefromthefollowingsources:surfacetemperaturefluctuation,stressdifferenceorcollisionbetweenhighspeedsputteredatoms.Thesenanoparticlesgoongrowingandformmanyirregularlyshapedgrains.AndtheseirregularlyshapedgrainsfurtherconnecteachotheraccordingtocharacteristicAorB,finallyformingtheAl-Sisurfacemorphology.4.ConclusionWecandrawthefollowingconclusionsfromtheabove.First,theexperimentalresultsshowedthatAFMisapowerfultooltoinvestigatethedetailsofAl-Sisurfacemorphologywhichcangreatlyenrichourknowledgeofthefilmgrowthmechanism.Second,depositionconditionsplayanimportantroleindeterminingtheAl-Sisurfacemorphology.Third,thetwoAl-Sisurfacemorphologycharacteristicsarethatirregularlyshapedgrainsassembleonaplaneandirregularlyshapedgrainstiltinginvaryingdegreespileupinspace.Fourth,forthefirsttime,nanoparticleswereobservedonirregularlyshapedgrainsurfacewhichsuggestedthatthefilmgrowthmechanismwasbyinhomogeneousnucleation.Acknowledgements-BeneficialdiscussionswereheldwithDr.ZhenandMr.Zhu.ThisworkwaspartiallysupportedbytheNationalNaturalScienceFoundationofChina.RFFERENCES｜｜1D.pramanikandA.N.Saxena,SolidStateTechnol.26(1983)127.2D.pramanikandA.N.Saxena,SolidStateTechnol.26(1983)131.3D.pramanikandA.N.Saxena,SolidStateTechnol.33(1990)73.4S.S.IyerandC.Y.Worg,J.Appl.phys.57(1985)4594.5J.F.Smith,SolidStateTechnol.27(1984)135.6D.GerthandD.Katzer,ThinSolidFilm208(1992)67.7R.J.WilsonandB.L.Weiss,ThinSolidFilm207(1991)291.8E.G.Solley,J.H.Linn,R.W.BelcherandM.G.Shlepr,SolidStateTechnol33(1990)409I.SmithandRHowland,SolidStateTechnol.33(1990)53.10L.Peters,SemiconductorInternational16(1993)62.##61D.pramanikandA.N.Saxena,SolidStateTechnol.26(1983)127.2D.pramanikandA.N.Saxena,SolidStateTechnol.26(1983)131.3D.pramanikandA.N.Saxena,SolidStateTechnol.33(1990)73.4S.S.IyerandC.Y.Worg,J.Appl.phys.57(1985)4594.5J.F.Smith,SolidStateTechnol.27(1984)135.6D.GerthandD.Katzer,ThinSolidFilm208(1992)67.7R.J.WilsonandB.L.Weiss,ThinSolidFilm207(1991)291.8E.G.Solley,J.H.Linn,R.W.BelcherandM.G.Shlepr,SolidStateTechnol33(1990)409I.SmithandRHowland,SolidStateTechnol.33(1990)53.10L.Peters,SemiconductorInternational16(1993)62.##A##BATOMIC FORCE MICROSCOPY OBSERVATION OF MAGNETRON SPUTTERED ALUMINUM-SILICON ALLOY FILMS$$$$J.W.Wu,J.H. Fang and Z.H.Lu (National Laboratory of Molecule and Biomolecule Electronics,Southeast University,Nanjing 210096, China Manuscript received 27 October 1995)Abstrcat:Two different surface morphology characteristics of magnetron sputtered aluminumsilicon(Al-Si)alloy films deposited at 0 and 200℃ were observed by atomic force microscopy(AFM).One is irregularly shaped grains put togther on a plane.The other is irregularly shaped grains Piled up in space. Nanometer-sized particles with heights from 1.6 to 2.9 nm were first observed. On the basis of these observations the growth mechanism of magnetron sputtered films is discussed.
关键词:
:magnetron sputtering
,
null
,
null
,
null
,
null
金属学报(英文版)
茫遥伲樱裕粒蹋蹋桑冢粒裕桑希巍。希啤。疲錩(38)Ni_(39)Si_(10)B_(13) METALLIC GLASS UNDER HELIUM ION IRRADIATION##2##3##4##5CRYSTALLIZATIONOFFe_(38)Ni_(39)Si_(10)B_(13)METALLICGLASSUNDERHELIUMIONIRRADIATION$YANGQifa(ChinaInstituteofAtomicEnergy,Beijing)ZHANGGuoguang;SHENWanshui(UniversityofScienceandTechnologyBeijing)Manuscriptreceived20February1995ThecrystallizationfeaturesofFe38Hi39Si10B13metallicglassunder100keVand6μA/cm2heliumionirradiationwithdifferentdosesarereported.ItisfoundthattheFe38Ni39Si10B13metallicglasscrystallizedundertheheliumionirradiationatthetemperaturelowerthantheordinarythermalcrystallizationtemperature.ThepreferentialprecipitationphaseisFeSi,andfollowedbytheeutecticphaseα-Fe.Thecriticaldosefortheformationofheliumbubblesinthematerialisaround5x10￣16/cm2.Thesensitivityofcrystallizationduetothetemperaturerisingunderheliumionirradiationandthemechanismofthesequenceofprecipitatedphasearebrieflydiscussed.Keywords:Fe38Ni39Si10B13,metallicglass,crystallization,helium,ionirradiationTheblisteringorflakingoffirstwallmaterialsinducedbyheliumionbombardment,whichisrelevanttothefirstwallsurfaceerosionandplasmacontamination,isacriticalproblemtobeconsideredinfusionengineering.Becauseofthefavourablyphysical,chemicalandotherproperties,especially,thebetterresistanceofblistering,metallicglassesareexpectedtobeapromisingcandidatematerialforthefirstwall.TyagiandNanderkarstudiedsystematicallytheblisteringphenomenaofsomemetallicglassmaterialsunderheliumionandprotonbombardmentwithvariousionenergy,ioncurrentdensityanddose,andfoundthecriticaldoseforblisteringofthesematerials[1-3].However,itisverysuspiciousthatmetallicglasseswillcrystallizeunderheliumionirradiationtolosetheiramorphouscharacter,whichwilldeterioratetheirproperties.GusevaandGordeevareportedthatFe40Ni40B20metallicglassbombardedbyheliumionwithenergyof40keVandionbeamcurrentdensitiesof5-40μA/cm2partiallycrystallizedbelowitsordinarythermalcrystallizationtemperature[4].ByusingXRDexamination,itwasfoundthatα-FeandM3B,M2BandMBwereprecipitated(whereM=FeandNi)underheliumionbombardmentwith5μA/cm2and100μA/cm2ioncurrentdensitiesrespectively.Nevertheless,TyagiandNanderkarfoundthatsomemetallicglassescrystallizedandsomedidnotundersameirradiatedparameters[1-3].Consequently,itisnecessarytoinvestigatetheirradiation-assisted-crystallizationfeatureofmetallicglassesbyheliumionirradiationfortheirapplicationinfusionengineering.Inpresentexperiment,thecrystallizationfeatureofFe38Ni39Si10B13metallicglassunderheliumionirradiationwithenergy100keVandvariousdosesintherangeof5×1016/cm2to1×1018/cm2,andthedistributionofheliumbubblesinmaterialaremeasuredbyusingtransmissionelectronmicroscope(TEM)andX-raydiffraction(XRD).1.ExperimentalApproachTheas-receivedFe-Ni-Si-Bmetallicglassribbonswith10mminwidthand0.2mminthicknessweresuppliedbyBeijingInstituteofMetallurgy.Thenominalcomposition(wt%)ofthematerialisNi47.37,Fe43.91,Si5.81andB2.91fromthechemicalanalysisandthecalculatedconstituentisFe38Ni39Si10B13.TheX-raydiffractogramofas-receivedmaterialdemonstratedthattheas-receivedmaterialhasagoodamoophouscharacter.Thetheimalcrystallizationprocessoftheas-receivedmaterialwastestedbydifferentialthermalanalysis(DTA).Theordinarythermalcrystallizationtemperaturewasdeterminedtobeabout490℃.Rectangularsampleswithanareaof1×2cmanddiscsampleswith3mmindiameterwereemployedrespectivelyforXRDandTEMexperiments.ThesamplesforXRDweremechanicallypolishedtomirrorsurfaee.Ontheotherhand,formakingTEMsamples,thepiecescutfromtheribbonwerethinnedto30μmthicknessfirst,thenpunchedout3mmdiscs,electrothinnedinamixedsolutionof10%perchloricacidand90%ethanolandfinally,thediscswereionmilledtoextendthethinarea.HeliumionirradiationofsampleswascarriedoutonTS51-200/ZKionimplanterinChinaInstituteofAtomicEnergy.ThesampleswerefixedonacopperholderwhichwascooledbyF-113coolant.Thevacuumintargetwasbetterthan3×10-3Paandthescanningareaofionbeamwasabout3×7cm.Thetemperatureridingofthesamplescausedbyionbeambombardmentwasmeasuredbythermalcouple.Undertheirradiationparametersofionbeamenergy100keVandionbeamcurrentdensity6μA/cm2,thetemperaturerisingofsampleswaslowerthan200℃.Theiondosesofimplantedsampleswerechosenfrom5×10￣16/cm2to1×10￣18/cm2inpresentexperiment.AJEOL-100CXTEMoperatedat100kVwasused.Thecalculatedmeanprojectrangeandrangestragghngofheliumionwithenergy100keVinthematerialwere306.9nmand85.5nmrespectively,whichwassimulatedbycodeTRIM86.2.Results2.1CrystallizationunderionirradiationTheselectedareadiffraction(SAD)patternsofun-irradiatedandirradiatedsamplesareshowninFig.l.Fortheun-irradiatedsample,thepatterniscomposedoftwoconcentricringswhichexhibitatypicalamorphousdiffractionfeature(Fig.la).Ontheotherhand,forirradiatedsamples,agroupofnewconcentricringsappearsonthebaseofamorphousdiffractionrings,whichmeanstheoccurrenceofpartialcrystallizationandtheformationofsomenewprecipitationphasesinoriginalamorphousmaterialsbyionirradiation.Withtheincreaseofiondose,theinitialamorpohousdiffractionringsbecomefainterandtheintensitiesofdiffractionringsprodueedbyprecipitatesdevelopehigher.Itisexpectedthatthecrystallizationinsamplesincreaseswiththeincreaseiniondose.Moreover,iftheiondoseislowerthan5×10￣17/cm2,thepatternsshowtypicalpolycrystallinediffractionfeaturewithrandomorientationandveryfinegrains(Figs.lbandlc),butfor1×10￣18/cm2iondose,somebrightspotsarise(Fig.ld),thismeansthatsomerelativelargegrainsformedinsampleunderirradiation.FromtheX-raydiffractogramofthesampleirradiatedbyheliumiontodoseof5×10￣17/cm2,thediffractionpoaksarestillamorpohousfeatureandnonewpeaks.Itispredictedthatthecrystallizationonlyoccursintheprojectedrangeofions.2.2AnalysisofprecipitationphaseFromindexingofdiffractionringsinFig.lbandFig.lc,theprecipitatephaseisanfcccrystallinestructure.InFig.ld,anadditionalbccphaseisfound(ring3,ring5andring8).Thecalculatedlatticeparametersforprecipitatephasesundervariousiondosesareasfollows:5×1016/cm2a=0.412nm(fcc)l×1017/cm2a=0.42lnm(fcc)5×1017/cm2a=0.428nm(fcc)l×1018/cm2a=0.478nm(fcc)a=0.292nm(bcc)UsingASTMindex,itisidentifiedthatthebccphaseisα-Fe(a=0.2866nm).Todeterminethefccprecipitatephase,weinspectedallcompoundswithfcccrystallinestructurecomposedofelementsFe,Ni,SiandB,foundthatthreecompoundsFeSi(a=0.446nm),FeNi3(a=0.353nm)andFe3Si(a=0.564nm),butthemostfavourablecompoundwasFeSi.Therefore,itisassumedthatthepreferentialprecipitatephaseisFeSi,andisfollowedbytheeutectcphaseα-Feundertheheliumionirradiation.2.3HeliumbubbledistributionThemorphologiesofheliumbubblesformedbyagglomerationofimplantedheliumionsareshowninFig.2.Thesmallblackdotspresentbubblesunderbrightfieldwiththeunderfocusingoperation.FromFig.2,itisrevealedthatbubbleslowerthedensity,butinflateinthedimensionwiththeincreaseiniondose.Moreover,underthehigherdosethebubblesjoinedtogether.Fig.3plotsthechangesofdensitiesanddiametersofbubbleswiththeiondose.ItisevidentthatthecriticaldosetoformbubblesinFe38Ni39Si10B13islowerthan5×1016/cm2,whichisslightdifferentfrom1×1017/cm2reportedbyTyagi[1].3.DiscussionAstheresultsreportedbyGusevaandGordeeva[4],theheliumirradiationcantrulybringonthepartialcrystallizationinmetallicglassFe38Ni39Si10B13belowitsordinarythermalcrystallizationtemperature.GusevaandGordeevaconfirmedthattheprecipitatesinFe40Ni40B20wasα-Fephaseunderheliumionirradiationof40keVenergyand5μA/cm2currentdensity,inwhichthetemperaturerisingofthesampleswaslowerthan200℃.Howerve,inpresentexperiment,thoughα-Fephaseisdetermined,notraceofM3B,M2BandMBprecipitatephaseisobserved,whichwasreportedbyaboveauthorsunderirradiationwithenergyof40keVandioncurrentdensityof30μA/cm2.Inaddition,theprecipitationprocessinpresentexperimentissomewhatdifferentfromtheprecipitationprocessreportedbyaboveauthors,thepreferentialprecipitationphaseisFeSi,andfollowedbytheeutecticphaseα-Fe.CrystallizationofamorphousFe40Ni40B20wasnotobservedbyTyagi,whichwasthesamematerialasthatusedbyGusevaandGordeeva,undertheirradiationwith100keVionenergyand30μA/cm2ioncurrentdensity[3].Itmayrelatetothetemperaturerisingofsamplesorsomethingelse.Accordingtothecomparisonandanalysis,itmaybeconcludedthatthecrystallizationofmetallicglassesisverysensitivetothetemperaturerisinginsamplescausedbyionbeamirradiation.ThereasonofthepreferentialphasetobeFeSiandfollowedα-Femaybethatinanamorphousmaterial,themetalloidelementsshouldkeepatthetotalcontentsabove20at%,otherwisesomeelementsorcompoundswillprecipitatetoremainthebalanceofchemicalcomposition.Therefore,astheprecipitationofFeSianddeclineofSicontentsinasample,FeandNimayprecipitateasaneutecticphaseaccordingtoaboveidea.Inthisexperiment,Feprecipitatedfirstly.ThedifferenceoflatticeparametersbetweenexperimentaldataandASTMstandarddatamayresultsintheexistencesofNiandBetcandincompletecrystallizationinsample.Thegeneralviewpointforirradiation-assisted-crystallizationofmetallicglassbelowtheirthermalcrystallizationtemperatureisthedisplacementdamagesinducedbycollosion-cascadebetweenincidentionsandtargetatoms.Thedisplacementdamagesprovidethenucleatingcentresandtheirradiation-assistedmigrationincreasesthecrystallizeddrivingforce,butnodirectrelationshipbetweenheliumandcrystallization.Thegrowthofagrainiscloselyattributedtothediffusionofneighbouringatomstothegrowingnucleus,whichisreliedonthetemperatureextremely,accordingly,thecrystallizationofmetallicglassisverysensitivetothetemperaturerisingfromionbeambombardmentinanirradiatedsample.4.Summary(l)TheFe38Ni39Si10B13metallicglasswillcrystallizebelowitsordinarythermalcrystallizationtemperatureunderheliumionirradiationwith100keVenergyand6μA/cm2ionbeamcurrentdensity.(2)ThepreferentialprecipitationphaseofthemetallicglassisFeSi,andfollowedbyaneutecticphaseα-Fe.(3)Thecriticaldoseformingheliumbubblesinthemetallicglassisabout5×1016/cm2,whichisslightlylowerthanthedosereportedbyTyagi.(4)Theirradiation-assisted-crystallizaofametallicglassesisverysensitivetothetemperaturerisingcausedbyionbeambombardmentinanirradiatedsample.Acknowledgements─TheauthorswouldliketothankthecolleaguesofIonImplantationGroupinChinaInstituteof.AtomicEnergy.forhelpinginsampleirradiation,alsotoProfe
关键词:
: Fe38Ni39Si10B13
,
null
,
null
,
null
,
null
