用微动摩擦磨损试验机进行304不锈钢/Al2O3摩擦副在Na2SO4 溶液中的微动腐蚀磨损实验。利用脉冲电位评价微动磨损产生的新生面与磨损表面的关系。结果表明，微动腐蚀磨损量随电位的增高而增大；新生面的面积约为磨痕面积的1/10；304不锈钢的微动腐蚀磨损是由电化学作用引起的腐蚀磨损。
In order to clarify the fretting wear behavior of 304 stainless steel in Na2SO4 solution, the electrochemical approach is applied in this work. The potential pulse method is used to evaluate the relationship between the fresh surface produced by fretting wear and lost surface. The results shows as follows: wear volume is increased with the increase of potential; the fresh surface area is approximately one tenth of the wear scar area, and fretting corrosion wear is caused by electrochemical element.
参考文献
| [1] | Iwabuchi A, Lee J W, Uchidate M. Synergistic effect of fretting wear and sliding wear of Co-alloy and Ti-alloy in Hanks'solution [J]. Wear, 2007, 263:492-500 [2]Li J W, Iwabuchi T A, Shimiz. A Study on the fretting wear of SUS304 steel in Na2SO4 solution [J]. Jpn. Soc. Tribol., 2005, 50(2): 180-186[3]Si S H. Effect of laser power on microstructures and wear properties of WCP/Ni metal ceramics coating [J]. J. Chin. Soc. Corros. Prot.,2004, 24(3): 183-187[4] 斯松华. 激光功率对WCp /Ni基金属陶瓷涂层的组织与磨损性能的影响 [J]. 中国腐蚀与防护学报, 2004, 24(3):183-187 [5]Weng Y J, Li X Y. A study on synergism between erosion and corrosion of carbon steel in sandy oil field brines [J]. J. Chin.Soc. Corros. Prot., 2000, 20(5): 281-286[6](翁永基, 李相怡. 碳钢在含沙油田水中腐蚀-磨损交互作用研究 [J].中国腐蚀与防护学报，2000, 20(5): 281-286)[7]Zhou Z R, Leo Vincent. Fretting Wear [M]. Beijing: Science Press, 2002[8](周仲荣, Leo Vincent. 微动磨损 [M]. 北京: 科学出版社, 2002)[9]Ren P D, Chen G X, Zhou Z R. Fretting wear behavior of GCr15 steel under lubrication of various aqueous mediums [J]. Tribology,2003，23(04): 331-33[10](任平弟, 陈光雄, 周仲荣. 不同水介质润滑下GCr15钢的微动磨损特性 [J]. 摩擦学学报，2003，23(04): 331-335)[11]Yan J Z, Wu Y S, Li J Q. Fretting corrosion wear transferability of 316L stainless steel [J]. J. Chin. Soc.Corros. Prot., 2001, 21(2): 88-94[12](闫建中, 吴荫顺, 李久青. 316L不锈钢微动磨蚀过程力学化学交互作用的迁移行为 [J]. 中国腐蚀与防护学报，2001, 21(2): 88-94)[13]Yan J Z, Wu Y S, Zhang L. The effect of localized corrosion on fretting attack of 316L stainless steel in 0.9\% NaCl solution [J]. J. Chin. Soc. Corros.Prot., 2000, 20(4): 237-242[14](闫建中, 吴荫顺, 张琳. 316L不锈钢在NaCl溶液微动过程中局部腐蚀作用研究 [J]. 中国腐蚀与防护学报，2000, 20(4): 237-242)[15]Yan J Z, Wu Y S, Li J Q. Repassivation behavior of 316L stainless steel in fretting wear and corrosion process [J]. J. Chin. Soc. Corros. Prot., 2000, 20(6):355-360[16](闫建中, 吴荫顺, 李久青. 316L不锈钢微动磨蚀过程表面钝化膜自修复行为研究 [J]. 中国腐蚀与防护学报，2000, 20(6): 355-360)[17]Tian X L, Lin Y Z, Liu J J.Electrochemical behavior in erosion-corrosion of carbon steel in liquid-solid double-phase flow loop [J]. J. Chin. Soc. Corros.Prot., 2004, 24(1): 48-51[18](田兴玲, 林玉珍, 刘景军. 碳钢在液/固双相管流中磨损腐蚀的电化学行为 [J]. 中国腐蚀与防护学报，2000, 20(6): 355-360)[19]Li J W. Fretting corrosion property of Zr-4 alloy in Na2SO4 solution [J]. Tribology, 2007，27(5): 406-410[20] 李积武. Zr-4合金在Na2SO4溶液中的微动腐蚀特性 [J]. 摩擦学学报, 2007, 27(5):406-410[21]Kim D G, Lee Y Z. Experimental investigation on sliding and fretting wear of steam generator tube materials [J]. Wear, 2001,250-251: 637-680[22]Hou B, Huang W J, Chen B S, et al. Fretting wear mechanisms of AZ91D magnesium alloy in slip regime [J].Tribology, 2004，24(4): 351-354[23] 侯滨，黄伟九，陈波水等. AZ91D镁合金滑移区域微动磨损机理研究 [J]. 摩擦学学报, 2004, 24(4):351-354[24]Luo Q, Qiu S Y. Yin K J, et al. Influence of Cr6+ on corrosion behavior of type 321 stainless steel in uranyl nitrate solution [J]. Corros.Prot., 2008, 29(3): 113-115[25] 罗强, 邱绍宇, 尹开锯等. Cr6+对321不锈钢在硝酸铀酰溶液中的腐蚀行为影响 [J]. 腐蚀与防护, 2008, 29(3):113-115[26] Kim T H. Fretting wear characteristics of zircaloy-4 tube [J]. Wear, 1998, 219(1):3-7[27] Attia M H, Magel E. Experimental investigation of long term fretting wear of multi-span steam generator tube withU-bend sections [J]. Wear, 1999, 225:563-574[28]Iwabuchi A，Sonoda T，Yashiro H，et al. Application of potential pulse method to the corrosion behavior of the fresh surface formed by scratching and sliding in corrosive wear [J]. Wear，1999, 226: 181-189 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%