采用有限元分析软件ABAQUS,对具有金属内衬的纤维缠绕复合材料圆筒在固化过程中残余应力及应变的变化规律进行了模拟计算.采用FORTRAN语言编制了用以分析固化过程中残余应力的子程序,该子程序考虑了固化过程中复合材料力学性质的变化和由于树脂固化收缩产生的化学收缩应变.算例结果表明:复合材料和金属内衬的残余应力在初始阶段均接近于零,当固化到一定阶段,残余应力迅速增加并且很快达到最大值,在降温阶段释放了部分的残余应力;在整个固化过程中,金属内衬受到压应力,而纤维缠绕层受到拉应力.本文中的三维有限元模型可以得到任意时刻复合材料的温度及固化度分布,通过数值模拟可以有效地优化复合材料固化工艺参数,提高制件的质量.
参考文献
| [1] | Madhu S. Madhukar;Mohamed S. Genidy;John D. Russell;Andre Y. Lee.A new method to reduce cure-induced stresses in thermoset polymer composites, Part III: correlating stress history to viscosity, degree of cure, and cure shrinkage[J].Journal of Composite Materials,200022(22):1926-1947. |
| [2] | 张纪奎;郦正能;关志东;程小全.固化度与固化收缩对非对称复合材料层合板固化变形的影响[J].复合材料学报,2007(2):120-124. |
| [3] | 黄其忠;任明法;陈浩然.复合材料网格结构软模共固化成型工艺数值仿真[J].复合材料学报,2010(1):25-31. |
| [4] | Vincenza Antonucci;Michele Giordano;Kuang-Ting Hsiao;Suresh G. Advani.A methodology to reduce thermal gradients due to the exothermic reactions in composites processing[J].International Journal of Heat and Mass Transfer,20028(8):1675-1684. |
| [5] | Nima Zobeiry;Reza Vaziri;Anoush Poursartip.Computationally efficient pseudo-viscoelastic models for evaluation of residual stresses in thermoset polymer composites during cure[J].Composites, Part A. Applied science and manufacturing,20102(2):247-256. |
| [6] | Jun Li;Xuefeng Yao;Yinghua Liu.A study of the integrated composite material structures under different fabrication processing[J].Composites, Part A. Applied science and manufacturing,20094(4):455-462. |
| [7] | T. Behzad;M. Sain.Finite element modeling of polymer curing in natural fiber reinforced composites[J].Composites science and technology,20077/8(7/8):1666-1673. |
| [8] | 黄其忠;任明法;陈浩然;张驰群.复合材料先进网格结构共固化工艺的温度场模拟[J].复合材料学报,2011(3):141-147. |
| [9] | Lee W I;Loos A C;Springer G S.Heat of reaction,degree of cure,and viscosity of hercules 3501-6 resin[J].Journal of Composite Materials,198216(6):510-520. |
| [10] | Kim Y K;White S R.Viscoelastic analysis of processing-induced residual stresses in thick composite laminates[J].MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES,19974(4):361-387. |
| [11] | Tang J M;Lee W I;Spring G S.Effects of cure pressure on resin flow,voids and mechanical properties[J].Journal of Composite Materials,198721(5):421-440. |
| [12] | Dusi M R;Lee W I;Ciriscioli P R.Cure kinetics and viscosity of fiberite 976 resin[J].Journal of Composite Materials,198721(3):243-261. |
| [13] | Lee S Y;Spring G S.Effects of cure on the mechanical properties of composites[J].Journal of Composite Materials,198822(1):15-29. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%