通过铜模喷铸法成功制备了一系列内生β-Ti(Zr,Nb)枝晶增塑的Ti—Zr—Nb—Cu—Be非晶复合材料,研究了成分对枝晶体积分数及尺寸的影响及其对复合材料力学性能的调节作用。结果表明,Ti48Zr20Nb12Cu5Be15合金压缩强度达到2061MPa,塑性变形高达22.5%,表现出优异的综合力学性能。非晶复合材料的塑性不仅与β—Ti(Zr,Nb)枝晶相的体积分数有关,而且受到枝晶尺寸的强烈影响,在一定体积分数条件下,枝晶相的尺寸越大,对剪切带的阻碍作用越明显,合金的塑性越高。
A series of Ti - Zr - Nb - Cu - Be metallic glass matrix composites with β-Ti(Zr, Nb) dendrites were synthesized by the copper-mold injection casting. The effects of the components on the size and volume fraction of dendrites were studied, and the mechanical properties of the samples were also investigated. The results show that Ti48 Zr20 Nbi2 Cu5Be15 performs good mechanical properties with compressive strength of 2061 MPa and plasticity up to 22.5%. The plasticity of metallic glass matrix composites is not only determined by the volume fraction of dendries, but also by the size of dendrites. The larger the dendrites, the more obvious for the resistance of moving shear bands, and the much higher plasticity of the alloy.
参考文献
[1] | Inoue A, Takeuchi A. Recent development and applicationproducts of bulk glassy alloys [J]. Acta Materialia, 2011,59(6): 2243-2267. |
[2] | Johnson W. Bulk amorphous metal—An emerging engineeringmaterial [J]. JOM Journal of the Minerals, Metals andMaterials Society * 2002, 54(3) : 40-43. |
[3] | Trexler M M, Thadhani N N. Mechanical properties of bulkmetallic glasses [J]. Progress in Materials Science, 2010,55(8): 759-839. |
[4] | Spaepen F. A microscopic mechanism for steady stateinhomogeneous flow in metallic glasses [ J ]. ActaMetallurgica, 1977,25(4): 407-415. |
[5] | Liu Y H, Wang G,Wang R J, et al. Super plastic bulkmetallic glasses at room temperature [J]. Science, 2007, 315(5817). 1385-1388. |
[6] | Hays C,Kim C, Johnson W. Microstructure controlled shearband pattern formation and enhanced plasticity of bulk metallicglasses containing in situ formed ductile phase dendritedispersions [J]. Physical Review Letters,2000,84(13):2901-2904. |
[7] | Hofmann D C,Suh J Y,Wiest A, et al. Designing metallicglass matrix composites with high toughness and tensileductility [J]. Nature, 2008,451(7182): 1085-1089. |
[8] | Qiao J W, Sun A C,Huang E W, et al. Tensile deformationmicromechanisms for bulk metallic glass matrix composites:From work - hardening to softening [J]. Acta Materialia. 2011, 59(10): 4126-4137. |
[9] | Szuecs F, Kim C P, Johnson W L. Mechanical properties ofZr56.2 Tin. g Nbs. o Cu6.9 Nis. $ Bei2.5 ductile phase reinforced bulkmetallic glass composite [J]. Acta Materialia, 2001, 49(9):1507-1513. |
[10] | Duan G, Wiest A, Lind M L, et al. Lightweight Ti - basedbulk metallic glasses excluding late transition metals [J].Scripta Materialia, 2008, 58(6) : 465-468. |
[11] | Park J M,Jayaraj J, Kim D H,et al. Tailoring of in situ Ti-based bulk glassy matrix composites with high mechanicalperformance [J], Intermetallics, 2010,18(10) : 1908-1911. |
[12] | Hofmann D C, Suh J Y,Wiest A, et al. Development oftough. low-density titanium- based bulk metallic glass matrixcomposites with tensile ductility [J]. Proceedings of theNational Academy of Sciences,2008,105(51) : 20136-20140. |
[13] | Qiao J W, Zhang Y, Liaw P K, et al. Micromechanisms ofplastic deformation of a dendrite/Zr-based BMGC [J]. ScriptaMaterialia, 2009,61(11): 1087-1090. |
[14] | Inoue A. Stabilization of metallic supercooled liquid and bulkamorphous alloys [J]. Acta Materialia, 2000,48(1) : 279-306. |
[15] | Pauly S, Liu G, Wang G,et al. Modeling deformationbehavior of Cu - Zr - Al bulk metallic glass matrix composites[J], Applied Physics Letters,2009,95(10) : 101906. |
[16] | Fan C,Li C,Inoue A, et al. Deformation behavior of Zr -based bulk nanocrystalline amorphous alloys [J], PhysicalReview B, 2000,61(6): R3761-R3763. |
[17] | Hays C C, Kim C P, Johnson W L. Improved mechanicalbehavior of bulk metallic glasses containing in situ formedductile phase dendrite dispersions [J], Materials Science andEngineering: A, 2001,304/305/306 : 650-655. |
[18] | 张建庭,乔捃威,张勇.Bridgman法制备塑性钛基轻质非晶复合材料[J].金属学报,2011,47(2): 236-240. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%