以两种Al2O3-TiO2复合粉体为原料经SPS烧结制备出Al2O3-Al2TiO5复相陶瓷.采用纳米结构复合粉体烧结而成的复相陶瓷有着较优的力学性能,特别是具有较高的断裂韧性和硬度,与其较小的晶粒尺寸相对应.干滑动摩擦磨损试验在4N和6N法向载荷下进行,结果表明,采用微米结构复合粉体烧结而成的复相陶瓷磨损表面较光滑,体积磨损量较小.在磨损试验中,纳米结构复合粉体烧结而成的复相陶瓷的破坏方式为沿晶断裂,有明显的晶粒拔出现象;微米结构复合粉体烧结而成的复相陶瓷呈不连续的微观断裂并产生塑性变形;同时,两种材料在摩擦磨损过程中都发生接触面的氧化和物质转移.
参考文献
| [1] | Bajwa S;Rainforth W M;Lee W E .Sliding wear behaviour of SiC-Al2O3 nanocomposites[J].Wear,2005,259:553. |
| [2] | Morita Yusuke;Nakata Kenichi;Ikeuchi Ken .Wear properties of zirconia/alumina combination for joint prostheses[J].Wear,2003,254:147. |
| [3] | Lee S W;Morillo C;Lira-Olivares J et al.Tribological and microstructural analysis of Al2O3/TiO2 nanocomposites to use in the femoral head of hip replacement[J].Wear,2003,255:1040. |
| [4] | DENG JIANXIN;DING ZELIANG;ZHAO JUN .Unlubricated friction and wear behaviors of various alumina-based ceramic composites against cemented carbide[J].CERAMICS INTERNATIONAL,2006(5):499-507. |
| [5] | Senthil Kumar A;Raja Durai A;Sornakumar T .Wear behaviour of alumina based ceramic cutting tools on machining steels[J].Tribology International,2006,39:191. |
| [6] | 薛群基;刘惠文 .陶瓷摩擦学[J].摩擦学学报,1995,15(04):376. |
| [7] | Davidge R W;Twigg P C;Riley F L .Effects of silicon carbide nano-phase on the wet erosive wear of polycrystalline alumina[J].Journal of the European Ceramic Society,1996,16:799. |
| [8] | He Y J;Winnubst A J A;Schipper D J et al.Effects of a second phase on the tribological properties of Al2O3 and ZrO2 ceramics[J].Wear,1997,210:178. |
| [9] | Ucar V;Ozel A;Mimaroglu A et al.Influence of SiO2 and MnO2 additives on the dry friction and wear performance of Al2O3 ceramic[J].Materials & Design,2001,22:171. |
| [10] | Wang X T;Padture N P;Tanaka H et al.Wear-resistant ultra-fine-grained ceramics[J].Acta Materialia,2005,53:271. |
| [11] | Park S Y;Jung S W;Chung Y B .The effect of starting powder on the microstructure development of alumina-aluminum titanate composites[J].Ceramics International,2003,29:707. |
| [12] | Bowen Paul;Carry Claude .From powders to sintered pieces:Forming,transformations and sintering of nanostructured ceramic oxides[J].Powder Technology,2002,128:248. |
| [13] | Davidge R W;Riley F L .Grain-size dependence of the wear of alumina[J].Wear,1995,186-187:45. |
| [14] | 史琳琳,曾令可,王慧,张明,程小苏.烧结工艺对Si3N4-SiC材料性能的影响[J].材料科学与工程学报,2003(03):416-419. |
| [15] | 张永振.材料的干摩擦学[M].北京:科学出版社,2007:167. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%