欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 金属功能材料
  4. 9Cr马氏体耐热钢的组织性能分析和失效研究

金属功能材料, 2012, 19(1): 26-31.

9Cr马氏体耐热钢的组织性能分析和失效研究

袁超 1, , 胡正飞 2, , 武艳君 3,

1.同济大学材料科学与工程学院上海市金属功能材料开发应用重点实验室,上海200092

2.同济大学材料科学与工程学院上海市金属功能材料开发应用重点实验室,上海200092

3.同济大学材料科学与工程学院上海市金属功能材料开发应用重点实验室,上海200092

关键词： 9Cr马氏体耐热钢 , 组织结构 , 失效

Property and Degradation Analysis of 9Cr Heat-Resistant Steel

9Cr马氏体耐热钢是目前制造热电厂关键设备的主选钢种,其最大的特点是600℃左右高温服役条件下具有良好的持久强度,较好的抗腐蚀性能.本文主要分析了9Cr马氏体耐热钢的基本结构和性能,对其性能进行了探讨,并进一步分析了长期服役后材料性能、组织退化的特点,为今后的研究提供有益的参考.

参考文献

[1] Ennis P J et al.Recent advances in creep resistant steels for power plant applications[J].Sadhana,2003,28(3/4):709.
[2] Masuuyama F .History of power plant and progress in heat resistant steel s[J].ISIJ International,2001,41(06):612.
[3] Fujia T .Crrent progress in advanced high Cr ferritic steels for high temperature applications[J].ISIJ International,1992,32(02):175.
[4] Shibli A;Starr F .Some aspect s of plant and research expe rience in t he use of new high strength martensitic steel P91[J].International Journal of Pressure Vessels and Piping,2007,84(1/2):114.
[5] Vaillant J C;Vandenberghe B et al.T/P23,24,911and 92:New grades for advanced coal fire power plant s:properties and experience[J].International Journal of Pressure Vessels and Piping,2008,85(1/ 2):38.
[6] Kimura M;Yamaguchi K et al.Microstructure of creep-fatigued 9-12% Cr ferritic heat-reisisting steels[J].International Journal of Fatigue,2006,28:300-308.
[7] Hayakawa M;Hara T et al.Microstructural observation of tempered martensite in medium-carbon low-alloy steel by atomic force microscopy[J].Journal of the Japan Institute of Metals,2000,64(06):460-466.
[8] Masao Hayakawa;Saburo Matsuoka;Kaneaki Tsuzaki .Observations of Prior Austenite Grain Boundaries and Carbides in the Same Area of Tempered Martensite in Medium-Carbon Steel by Atomic Force Microscopy[J].日本金属学会誌,2001(8):734-741.
[9] Kouichi MARUYAMA;Kota SAWADA;Jun-ichi KOIKE .Strengthening Mechanisms of Creep Resistant Tempered Martensitic Steel[J].ISIJ International,2001(6):641-653.
[10] Furtado H C;de Almedia L H;L.Le May .Precipitation in 9Cr-1Mo steel after creep deformation[J].Materials Characterization,2007,58:72-77.
[11] John HALD;Leona KORCAKOVA .Precipitate Stability in Creep Resistant Ferritic Steels-Experimental Investigations and Modelling[J].ISIJ International,2003(3):420-427.
[12] Janovec J;Svoboda M;Kroupa A et al.Thermal-induced evolution of secondary phase in Cr-Mo-V low alloy steels[J].Journal of Materials Science and Technology,2006,41:3425-3433.
[13] Hattestrand M.;Andren HO.;Schwind M. .Microanalysis of two creep resistant 9-12% chromium steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1):27-36.
[14] 太田定雄;张善元;张绍林.铁素体系耐热钢[M].北京:冶金工业出版社,2003
[15] Thomas V;Saroja S;Vijayalakshmi M .Microstructural stability of modified 9Cr-Mo steel during long term exposures at elevated temperatures[J].Journal of Nuclear Materials,2008,378:273-281.
[16] 束国刚,刘树涛,范长信,梁昌乾,薛飞,刘江南,王正品,石崇哲.国产9Cr-1Mo-V-Nb-N钢的静力强塑性研究[J].中国电力,2002(07):26-30.
[17] J. Hald .Microstructure and long-term creep properties of 9-12% Cr steels[J].International Journal of Pressure Vessels and Piping,2008(1/2):30-37.
[18] Orlova A .Microstructural development during high temperature creep of 9%Cr steels[J].Materials Science and Engineering,1998,A245:39-48.
[19] Kazushi HAMADA;Kazushige TOKUNO;Yukio TOMITA .Effects of Precipitate Shape on High Temperature Strength of Modified 9Cr-1Mo Steels[J].ISIJ International,1995(1):86-91.
[20] 朱莉慧;赵钦新;顾海澄 .10Cr9Mo1VNbN耐热钢强化机理研究[J].机械工程材料,1999,23(01):6-8.
[21] Sawada K;Kubo K;Abe F .Creep behavior and stability of MX precipitates at high temp-erature in 9Cr-0.5Mo-1.8W-VNbsteel[J].Materials Science and Engineering,2001,A319-321:784-787.
[22] Klotz U E;Solenthaler C;Uggowitzer P J .Martensitic-austernitic 9-12% Cr steels-alloy design,microstructural stability and mechanical properties[J].Materials Science and Engineering,2008,476 A:186-194.
[23] P.J.Ennis;A.Zielinska-lipiec;O.Wachter .Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant[J].Acta Materialia,1997(12):49014907-0.
[24] Sonderegger B;Mitsche S;Cerjak H .Martensite laths in creep resistant martensitic 9-12 % Cr steels-Calculation and measurement of misorientations[J].Materials Characterization,2007,58:874-882.
[25] F. Abe .Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr-W steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):565-569.
[26] A. Kostka;K.-G. Tak;R.J. Hellmig .On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite ferritic steels[J].Acta materialia,2007(26):539-550.
[27] J. Pesicka;R. Kuzel;A. Dronhofer;G. Eggeler .The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels[J].Acta materialia,2003(16):4847-4862.
[28] Eggeler G .The effect of long-term creep on particle coarsening in tempered martensite ferritic steels[J].Acta Metallurgy,1989,37(12):3225-3234.
[29] Kota SAWADA;Hideaki KUSHIMA;Kazuhiro KIMURA .Z-phase Formation during Creep and Aging in 9-12% Cr Heat Resistant Steels[J].ISIJ International,2006(5):769-775.
[30] 曹仁焕;徐岩 等.10Cr9MoVNb钢的组织和性能[J].特殊钢,1995,16(03):29-31.
[31] Hattestrand M;Andren H O .Evaluation of particle size distributions of precipitates in 9% chromium steel using energy filtered transmission electron microscopy[J].Micron,2001,32:789-797.
[32] Leona Korcakova;John Hald;Marcel A.J. Somers .Quantification of Laves phase particle size in 9CrW steel[J].Materials Characterization,2001(2):111-117.
[33] 胡正飞,杨振国.X20CrMoV12.1耐热合金钢长期高温时效的脆性[J].材料工程,2003(12):14-17,22.
[34] 杨振国,张鉴,胡正飞,吴连生,钱杰民,姜芝蓉,季献武,何仕良.长期运行的X20CrMoV12.1钢主蒸汽管性能劣化研究[J].中国电力,2005(02):22-26.
[35] Jae Seung Lee;Hassan Ghassemi Armaki;Kouichi Maruyama .Causes of breakdown of creep strength in 9Cr-1.8W-0.5Mo-VNb steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):270-275.
[36] Ehlers J;Young D J;Smaardijk E J et al.Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments[J].Corrosion Science,2006,48:3428-3454.
[37] Ennis P J;Quadakkers W J .Impliactions of steam oxidation for the service life of high-strength martensitic steel components in high-temperature plant[J].International Journal of Pressure Vessels and Piping,2007,84:82-87.
[38] Yongsun Yi;Byeonghak Lee;Sungho Kim;Jinsung Jang .Corrosion and corrosion fatigue behaviors of 9cr steel in a supercritical water condition[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):161-168.
[39] Hald J;Straub S;J.Lecomte-Beckers.Materials for advanced power engineering 1998[J].Forschungszentrum Julich GmbH Julich,1998:599.
[40] Hattestrand M;Schwind M;Andren H O;J.Lecomte-Beckers.Materials for advanced power engineering[M].Forschungszentrum Julich GmbH,Julich,1998:529.
[41] 戚正风.固态金属中的扩散与相变[M].北京:机械工业出版社,1998
[42] 符长璞.20Cr11MoVNbNBNi钢中碳化物粗化动力学的研究[A].,1991
[43] 李子峰 .10CrgMo1VNb钢的性能与组织研究[D].哈尔滨:哈尔滨工程大学,2006.
[44] Hald J;Straub S;J.Lecomte-Beckers.Materials for advanced power engineering[M].Forschungszentrum Julich GmbH,Julich,1998:155.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net