利用高速剪切和球磨相结合的工艺,用石蜡辅助分散,制备得到碳纳米管(CNT)/铝复合粉体,随后采用常压烧结与大气热压相结合的工艺成型,最后经过热挤二次加工制备得到CNT增强铝基复合材料.结果表明,采用石蜡辅助的球磨混合分散工艺能显著改善CNT在基体中分布的均匀性,常压烧结后大气热压能显著提高材料致密度,达到类似热压烧结的效果,使材料力学性能显著提高；随着CNT含量的增加,复合材料的拉伸强度和布氏硬度逐渐升高,当CNT质量分数增加到2.0％时达到最大值,分别为245MPa和106.66N/mm2.
参考文献
| [1] | C. He;N. Zhao;C. Shi;X. Du;J. Li;H. Li;Q. Cui .An Approach to Obtaining Homogeneously Dispersed Carbon Nanotubes in Al Powders for Preparing Reinforced Al-Matrix Composites[J].Advanced Materials,2007(8):1128-1132. |
| [2] | Michele T. Byrne;Yurii K. Gun'ko .Recent Advances in Research on Carbon Nanotube-Polymer Composites[J].Advanced Materials,2010(15):1672-1688. |
| [3] | Hansang Kwon;Mehdi Estili;Kenta Takagi .Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2009(3):570-577. |
| [4] | Zeng, X.;Zhou, G.;Xu, Q.;Xiong, Y.;Luo, C.;Wu, J. .A new technique for dispersion of carbon nanotube in a metal melt[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(20):5335-5340. |
| [5] | Bakshi, SR;Singh, V;Seal, S;Agarwal, A .Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders[J].Surface & Coatings Technology,2009(10/11):1544-1554. |
| [6] | Han GY;Yuan JY;Shi GQ;Wei F .Electrodeposition of polypyrrole/multiwalled carbon nanotube composite films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2005(1/2):64-69. |
| [7] | Srinivasa R. Bakshi;Arvind Agarwal .An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2011(2):533-544. |
| [8] | S. R. Bakshi;D. Lahiri;A. Agarwal .Carbon nanotube reinforced metal matrix composites - a review[J].International Materials Reviews,2010(1):41-64. |
| [9] | 杨益,杨盛良.碳纳米管增强金属基复合材料的研究现状及展望[J].材料导报,2007(z1):182-184. |
| [10] | Baykal, B.;Ibrahimova, V.;Er, G.;Bengü, E.;Tuncel, D. .Dispersion of multi-walled carbon nanotubes in an aqueous medium by water-dispersible conjugated polymer nanoparticles[J].Chemical communications,2010(36):6762-6764. |
| [11] | DENG Chunfeng,ZHANG Xuexi,MA Yanxia,WANG Dezun.Fabrication of aluminum matrix composite reinforced with carbon nanotubes[J].稀有金属（英文版）,2007(05):450-455. |
| [12] | Esawi A;Morsi K .Dispersion of carbon nanotubes(CNTs)in aluminum powder[J].Composites Part A:Applied Science and Manufacturing,2007,38(02):646. |
| [13] | Deng CF;Wang DZ;Zhang XX;Li AB .Processing and properties of carbon nanotubes reinforced aluminum composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):138-145. |
| [14] | Esawi A M K;Morsi K;Sayed A et al.Fabrication and properties of dispersed carbon nanotube-aluminumcomposites[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,508(1-2):167. |
| [15] | Liao J Z;Tan M J;Sridhar I .Spark plasma sintered multiwall carbon nanotube reinforced aluminum matrixcomposites[J].Materials & Design,2010,31(01):S96. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%