The crack behavior of LDX 2101 by hot compression tests in the temperature range of 950 to 1 150 ℃ and strain rate range of 0. 01 to 30 s-1 was studied. The hot workability map of LDX 2101 was constructed and the alloy exhibited a better crack resistance at higher temperature and lower strain rate. Microvoids initiated and coalesced into crack at subsurface on the equatorial plane of bulge surface under secondary tensile condition. The cracks were orientated at an angle of approximately 45° with respect to the compression axis due to the secondary tensile stress. Microcracks easily initiated on the interface of ferrite and austenite and propagated within ferrite. The predicted results using specific plastic work approach were matched well with the free surface cracks.
参考文献
| [1] | HENRIK SIEURIN;ROLF SANDSTROM;ELIN M. WESTIN .Fracture Toughness of the Lean Duplex Stainless Steel LDX 2101[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2006(10):2975-2981. |
| [2] | A.Iza-Mendia .Microstructural and Mechanical Behavior of a Duplex Stainless Steel under Hot Working Conditions[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1998(12):2975-2986. |
| [3] | Cabrera J M;Matco A;Llanes L et al.Hot Deformation of Duplex Stainless Steel[J].Journal of Materials Processing Technology,2003,143/144:321. |
| [4] | Evangelista E;Mcqueen H J;Niewczas M et al.Hot Workhility of 2304 and 2205 Duplex Stainless Steel[J].Canadian Metallurgical Quarterly,2004,43(03):339. |
| [5] | G. Fargas;M. Anglada;A. Mateo .Effect of the annealing temperature on the mechanical properties, formability and corrosion resistance of hot-rolled duplex stainless steel[J].Journal of Materials Processing Technology,2009(4):1770-1782. |
| [6] | Mats Liljas;Pelle Johansson;Hui-Ping Liu .Development of a Lean Duplex Stainless Steel[J].Steel Research International,2008(6):466-472. |
| [7] | Zhang Wei;Jiang Laizhu;Hun Jincheng .Effect of ageing on precipitation and impact energy of 2101 economical duplex stainless steel[J].Materials Characterization,2009(1):50-55. |
| [8] | ZhangWei;Jiang Laizhu;Hu Jincheng;Song Hongmei .Study of mechanical and corrosion properties of a Fe–21.4Cr–6Mn–1.5Ni–0.24N–0.6Mo duplex stainless steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):501-504. |
| [9] | Satish V K;Prasad Y V R K;Biswas S K .Flow Instabilities and Fracuture in Ti-6Al-4V Deformed in Compression at 298 K to 673 K[J].Metallurgical and Materials Transactions,1994,25A(10):2173. |
| [10] | Kuhn H A;Lee P W .Strain Instability and Fracture at the Surface of Upset Cylinders[J].Metallurgical and Materials Transactions,1971,2:3197. |
| [11] | Lee P W;Kuhn H A .Fracture in Cold Upset Forming-A Criterion and Mode[J].Metallurgical and Materials Transactions,1973,4B(04):969. |
| [12] | Xie S S;Lee J D;Yoon U S et al.Compression Test to Reveal Surface Crack Sensitivity Between 700 and 1 100 ℃ of NbBearing and High Ni Continuous Casting Slabs[J].ISIJ International,2002,42(07):708. |
| [13] | Lee H W;Kown H C;Awais M et al.Instability Map Based on Specific Plastic Work Criterion for Hot Deformation[J].Journal of Mechanical Science and Technology,2007,21(10):1534. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%