基于AST XSTRESS 3000型应力仪,结合化学腐蚀逐层剥离技术的基础上,研究了热轧高碳钢盘条及其拉拔钢丝的表面轴向应力,并测量了盘条内部铁素体的轴向应力分布.研究表明盘条及钢丝的表面状态对残余应力的测量值有重要的影响,盘条轴向应力沿横截面直径方向的分布比较均匀,接近于零应力的水平.经过应变量为1.8的连续拉拔形变后,钢丝外表面的轴向应力值明显提高,由原始盘条表面的6.4MPa,增加到500MPa左右.
参考文献
| [1] | Elices M .Influence of residual stresses in the performance of cold-drawn pearlitic wires[J].Journal of Materials Science,2004(12):3889-3899. |
| [2] | M.L. Martinez-Perez;C.R. Borlado;F.J. Mompean .Measurement and modelling of residual stresses in straightened commercial eutectoid steel rods[J].Acta materialia,2005(16):4415-4425. |
| [3] | M. Elices;J. Ruiz;J.M. Atienza .Influence of residual stresses on hydrogen embrittlement of cold drawn wires[J].Materials and structures,2004(269):305-310. |
| [4] | A. J. Alawode;M. B. Adeyemi .Effects of degrees of deformation and stress-relief temperatures on the mechanical properties and residual stresses of cold drawn mild steel rods[J].Journal of Materials Processing Technology,2005(2):112-118. |
| [5] | M.L. MARTINEZ-PEREZ;F.J. MOMPEAN;R. LIN PENG;J. RUIZ;C.R. B0RLADO;J.M. ATIENZA;J. GIL-SEVILLANO;M. GARClA-HERNANDEZ;M. ELICES;T. BUSLAPS .Residual Stresses in Cold-drawn Pearlite Rods by High Energy Synchrotron Radiation and Thermal Neutron Diffraction[J].Journal of neutron research,2004(1/3):175-180. |
| [6] | M.L. Martinez-Perez;F.J. Mompean;J. Ruiz-Hervias .Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction[J].Acta materialia,2004(18):5303-5313. |
| [7] | Y.S. Yang;J.G. Bae;C.G. Park .Improvement of the bending fatigue resistance of the hyper-eutectoid steel wires used for tire cords by a post-processing annealing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):554-561. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%