介绍了PCM法制备泡沫铝影响孔结构的主要工艺因素,包括铝粉表面氧含量、粉体颗粒粒度、发泡剂、增粘剂、压制参数,并分析了PCM法制备泡沫铝合金现存的问题和今后的发展方向.
参考文献
| [1] | Marine M A;Ashaby M F.Applying the investment methodology for materials(IMM) to alumi-num foams[J].Materials & Design,2002(23):307. |
| [2] | Degischer H P;Kristy B;左孝青;周芸.多孔泡沫金属[M].北京:化学工业出版社,2005:1. |
| [3] | 王祝堂.泡沫铝材：生产工艺组织性能及应用市场（1）[J].轻合金加工技术,1999(10):5. |
| [4] | 余东梅.泡沫铝材的生产及工艺研究进展[J].铝加工,2004(02):24-26. |
| [5] | Naoyuki Kanetake;Makoto Kobashi;Satoshi Tsuda .Foaming Behavior of Aluminum Precursor Produced from Machined Chip Waste[J].Advanced Engineering Materials,2008(9):840-844. |
| [6] | Banhart J.Industrialisation of aluminium foam technology[A].Australia:Institute of Materials Engineering Australasia Ltd,2004:764. |
| [7] | Banhart J.Manufacture,characterisation and application of cellular metals and metal foams[J].Progress in Materials Science,2001(46):559. |
| [8] | 张绍军 .球磨法提高铝粉表面氧含量对泡沫铝孔结构的影响[D].东南大学,2007. |
| [9] | 郭志强,姚广春,尉海军,李红斌.粉体颗粒粒度对粉末冶金法制备泡沫铝材料的影响[J].东北大学学报（自然科学版）,2007(08):1163-1166. |
| [10] | 耿亮,王录才,王芳,刘杰,游晓红.基于PCM法泡沫铝制备工艺的控制及发展[J].铝加工,2010(03):12-15,34. |
| [11] | 李展超,亢德华,李蓉华,孙挺.TiH2在泡沫铝泡沫化过程中的分解过程研究[J].当代化工,2006(06):368-370. |
| [12] | Ahmed Ibrahim;Carolin Korner;Robert F. Singer .The Effect of TiH{sub}2 Particle Size on the Morphology of Al-Foam Produced by PM Process[J].Advanced Engineering Materials,2008(9):845-848. |
| [13] | 杨东辉,何德坪,杨上闰.氢化钛热分解反应动力学及铝合金熔体泡沫化研究[J].中国科学B辑,2004(03):195-201. |
| [14] | 方吉祥,杨志懋,丁秉钧.SiO2/TiH2包覆粉体的制备及其释氢特性[J].高等学校化学学报,2005(07):1225-1227. |
| [15] | 徐雷,赵康,陈永楠,汤玉斐,张蕾.TiH_2表面包覆SiO_2的结构和机理分析及释氢性能的研究[J].材料导报,2009(24):44-46,56. |
| [16] | 王录才,于利民,王芳,游晓红.TiH2的表面处理对释氢的影响及泡沫铝孔结构的控制[J].中国有色金属学报,2004(z2):73-77. |
| [17] | Paula M. Proa-Flores;Robin A. L. Drew .Production of Aluminum Foams with Ni-coated TiH{sub}2 Powder[J].Advanced Engineering Materials,2008(9):830-834. |
| [18] | 高洪吾,刘士魁,赵彦波,刘顺华,李长茂.加热氧化处理对TiH2释氢行为的影响[J].中国有色金属学报,2005(03):363-367. |
| [19] | Dirk Lehmhus.Evaluation of potential new matrix alloys for production of PM aluminium foams[A].America:MIT-verlag,2003:151. |
| [20] | 周向阳,刘希泉,李劼,刘宏专.采用新型发泡剂制备泡沫铝[J].中国有色金属学报,2006(11):1983-1987. |
| [21] | Papadopoulos D P;Omar H;Stergioudi F.The use of dolomite as foaming agent and its effect on the microstructure of aluminium metal foams-comparison to titanium hydride[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2010(12):1. |
| [22] | Kennedy A R;Asavavisithchai S.The effect of ceramic additions on foam expansion and stability in compacted Al-TiH2 powder precursors[A].America:MIT verlag,2003:147. |
| [23] | 刘斌 .泡沫铝的粉末冶金法制备各工艺改进及其孔结构控制研究[D].南京:东南大学,2005. |
| [24] | Esmaeelzadeh S;Simchi A;Lehmhus D .Effect of ceramic particle addition on the foaming behavior, cell structure and mechanical properties of P/M AlSi7 foam[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):290-299. |
| [25] | 魏莉,唐骥,姚广春.粉末冶金法制备泡沫铝时增粘过程的基础研究[J].铸造,2005(03):229-232. |
| [26] | 王磊,姚广春,罗洪杰,梁李斯,张志刚.Mg粉添加量对泡沫铝发泡行为的影响[J].中国有色金属学报,2010(07):1339-1345. |
| [27] | 魏莉,曹立,朴慧京.泡沫铝熔体粘度的控制与气泡稳定性研究[J].沈阳理工大学学报,2009(01):6-9,13. |
| [28] | 罗洪杰,姚广春,张晓明,刘宜汉,孙挺,魏莉.泡沫铝制备过程中增粘剂的选择[J].材料与冶金学报,2004(04):280-284. |
| [29] | 王芳,王录才.不同压制方法所得预制品的发泡性质研究[J].铸造设备研究,2008(05):12-14. |
| [30] | 王芳,王录才.泡沫铝预制品制备工艺的研究[J].铸造设备研究,2003(04):13-15. |
| [31] | Shiomi M;Imagama S;Osakada K.Fabrication of aluminium foams from powder by hot extrusion and foaming[J].Journal of Materials Processing Technology,2010(210):1203. |
| [32] | 刘菊芬,刘荣佩,史庆南,左孝青.新型泡沫铝制备工艺研究[J].材料导报,2002(08):65-67. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%