As a successive and local plastic delormation process, backward ball spinning was applied for the purpose of producing thin-walled tubular parts with longitudinal inner ribs. According to the local plastic deformation theory, the application of yield criterion to the spinning process and the influence of the radial spinning force component on the formability of inner ribs were analyzed. Based on yield criterion and plastic mechanics, the stable flow rude of metal material and forming criteria of the inner ribs were obtained and conformed to the experimental results so as to contribute greatly to improving the ball spinning process and optimizing the process variables, such as the diameter of ball, the reduction in a pass and the wall thickness of tubular blank, which have a significant influence on the formability of the inner ribs. The knowledge of the influence of the process variables such as the diameter of ball, the reduction in a pass and the wall thickness of tubular blank on the spinning process is essential to preventing the quality defects of the spun parts and obtaining the desired spun parts.
参考文献
[1] | Jae-Woo Park;Young-Ho Kim;Won-Byong Bae .Analysis of Tube-spinning Processes by the Upper-bound Stream-function Method[J].Journal of Materials Processing Technology,1997,66(1-3):195-203. |
[2] | Rajnish Prakash;R P Singhal .Shear Spinning Technology for Manufacture of Long Thin Wall Tubes of Small Bore[J].Journal of Materials Processing Technology,1995,54(1-4):186-192. |
[3] | Xue Kemin;Lu Yan;Zhao Xianming .The Disposal of Key Problems in the FEM Analysis of Tube Stagger Spinning[J].Journal of Materials Processing Technology,1997,69(1-3):176-179. |
[4] | Xue Kemin;Wang Zhen;Lu Yan et al.A Study of the Rational Matching Relationships Amongst Technical Parameters in Stagger Spinning[J].Journal of Materials Processing Technology,1997,69(1-3):167-171. |
[5] | Xue Kemin;Lu Yan .Elastic-plastic FEM Analysis and Experimental Study of Diametral Growth in Tube Spinning[J].Journal of Materials Processing Technology,1997,69(1-3):172-175. |
[6] | Y.Xu;S.H.Zhang;P.Li .3D rigid-plastic FEM numerical simulation on tube spinning[J].Journal of Materials Processing Technology,2001(1/3):710-713. |
[7] | Eamonn Quigley;John Monaghan .Metal forming: an analysis of spinning processes[J].Journal of Materials Processing Technology,2000(1):114-119. |
[8] | K. Kawai;L.-N. Yang;H. Kudo .A flexible shear spinning of truncated conical shells with a general-purpose mandrel[J].Journal of Materials Processing Technology,2001(1/3):28-33. |
[9] | M. D. Chen;R. Q. Hsu;K. H. Fuh .Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis[J].International Journal of Machine Tools & Manufacture: Design, research and application,2001(12):1721-1734. |
[10] | Yao Jianguo;Murata Makoto .An experimental study on paraxial spinning of one tube end[J].Journal of Materials Processing Technology,2002(1/3):324-329. |
[11] | Yao Jianguo;Murata Makoto .Effects of indented feed of roller tool on parallel spinning of circular aluminum tube[J].Journal of Materials Processing Technology,2002(1/3):274-279. |
[12] | Ismail Nawi;S. M. Mahdavian .Hydrodynamic lubrication analysis for tube spinning process[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1998(2):145-153. |
[13] | M. D. Chen;R. Q. Hsu;K. H. Fuh .Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis[J].International Journal of Machine Tools & Manufacture: Design, research and application,2001(12):1721-1734. |
[14] | C. C. Wong;T. A. Dean J. Lin .A review of spinning, shear forming and flow forming processes[J].International Journal of Machine Tools & Manufacture: Design, research and application,2003(14):1419-1435. |
[15] | 江树勇,李萍,薛克敏.Application of BPANN in spinning deformation of thin-walled tubular parts with longitudinal inner ribs[J].中南工业大学学报(英文版),2004(01):27-30. |
[16] | M I Rotarescu .A Theoretical Analysis of Tube Spinning using Balls[J].Journal of Materials Processing Technology,1995,54(1-4):224-229. |
[17] | 江树勇,薛克敏,宗影影,喻林.Process factors influencing spinning deformation of thin-walled tubular part with longitudinal inner ribs[J].中国有色金属学会会刊(英文版),2004(04):702-707. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%