利用氩弧熔覆技术在TC4合金表面成功制备出TiC、TiB、TiB2增强Ti基复合涂层.利用SEM、XRD和EDS分析了熔覆涂层的显微组织；利用显微硬度仪测试了复合涂层的显微硬度；利用摩擦磨损试验机测试了涂层在室温干滑动磨损条件下的耐磨性能.结果表明:氩弧熔覆涂层组织均匀致密,熔覆层与基体呈冶金结合,TC4合金表面有颗粒状TiC、粗大棒状相TiB2、细小棒状相TiB生成；复合涂层明显改善了TC4合金的表面硬度,涂层的最高显微硬度可达1300 HV0.2；复合涂层在室温干滑动磨损试验条件下具有优异的耐磨性,磨损机制主要是魔力磨损,其耐磨性较TC4合金基体提高近10倍.
参考文献
| [1] | WU Xiao-lei;CHEN Guang-nan .Microstructural characteristics and wear properties of in situ formed TiC particle reinforced coating by laser cladding[J].Acta Metllurgical Sinica,1998,34(12):1284-1288. |
| [2] | 田浩,耿林,倪丁瑞,孟庆武.TC4合金表面激光熔覆B4C及B4C+Ti粉末涂层的微观组织[J].稀有金属材料与工程,2007(03):420-423. |
| [3] | 陈瑶,王华明.激光熔覆TiC/FeAl复合材料涂层显微组织及初生TiC生长机制研究[J].稀有金属材料与工程,2003(07):569-572. |
| [4] | Xue Y;Wang HM .Microstructure and wear properties of laser clad TiCo/Ti2CO intermetallic coatings on titanium alloy[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2005(1/4):278-286. |
| [5] | Y. Chen;H. M. Wang .Microstructure and wear resistance of a laser clad TiC reinforced nickel aluminides matrix composite coating[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):80-87. |
| [6] | 刘勇,杨德庄,何世禹,武万良.TC4合金的磨损率及磨损表面层的显微组织变化[J].稀有金属材料与工程,2005(01):128-131. |
| [7] | 孙荣禄,刘勇,杨德庄.TC4合金及其表面TiCp/Ni基合金激光熔覆层的摩擦磨损性能[J].摩擦学学报,2003(06):457-462. |
| [8] | 邱明,张永振,杨建恒,朱均.摩擦热对Ti6Al4V合金摩擦磨损性能的影响[J].摩擦学学报,2006(03):203-207. |
| [9] | 武万良,李学伟,刘万辉,郭子玉.TiC增强钛基复合材料激光熔覆层显微组织及形成机理[J].稀有金属材料与工程,2006(09):1363-1366. |
| [10] | 宋思利,王新洪,邹增大,曲仕尧.氩弧原位合成TiC颗粒增强Fe基复合层[J].焊接学报,2006(02):39-42. |
| [11] | 宋思利,邹增大,王新洪,李清明.钨极氩弧熔敷技术制备含TiC颗粒增强涂层的研究[J].山东大学学报（工学版）,2006(03):1-4,12. |
| [12] | 王振廷,周晓辉,张显友,郑维.原位自生TiC-TiB2增强Fe基复合涂层的凝固特性及形成机理[J].材料热处理学报,2009(03):154-159. |
| [13] | 蒋军 .热等静压原位合成TiB<,2>-TiC<,x>复相陶瓷材料[D].西南交通大学,2003. |
| [14] | 杜宝帅,邹增大,王新洪,李清明.激光熔覆原位自生TiB2-TiC/ FeCrSiB复合涂层研究[J].应用激光,2007(04):269-272. |
| [15] | ZHAO Hong;CHENG Yi-bing .Formation of TiB2-TiC composites by reactive sintering[J].Ceramics International,1999,25(04):353-358. |
| [16] | Antonio M. Locci;Roberto Orru;Giacomo Cao .Effect of ball milling on simultaneous spark plasma synthesis and densification of TiC-TiB_2 composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):23-29. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%