材料期刊网

P/M superalloy disks obtain their final strength by appropriate heat treatments; the maximum attainable strength depends on the rapid cooling rate from the solution annealing. A rapid quench of a large disk forging can cause two problems, surface cracking and shape distortion.In the past,many attempts employ the finite element code to model and to predict temperature evolution and induced stress distribution in a large turbine disk. The major difficulty was the correct description of alloy behavior; particularly the thermomechanical properties and the failure criteria of material during the cooling. High temperature fatigue resistance is always the key requirement for disk materials. New methodology of residual life management emphasizes the initiation as well as the propagation of the cracks developed under the service conditions. One of major challenges to P/M superalloys is the time-dependent behavior of fatigue cracking, which relates to the well-known SAGBO (stress-assisted grain boundary oxidation) phenomenon.A great effort has been done to understand the micro-mechanism of time-dependent fatigue crack propagation resulted in the second generation of P/M superalloys. Further improvement on temperature capability of disk alloys at rim area may lead to the idea of dual-property disks.Different grain structures at different portions of a large disk are possible,as the property requirements for different locations are different. This goal is achievable if the thermal history at specific disk locations can be controlled to develop desirable microstructures and properties.Some suggestions on the future direction of research efforts will be discused.