Free opening rate is mainly determined by the performance of the ladle filler sand. High free opening rates of ladles are required in steel making to improve steel quality. Chromite ladle filler sands are one of the most widely used ladle filler sand. Several operative variables and materials characteristics affect the performance of the sands. Three sets of chromite ladle filler sands were selected and researches were focused on the sintering hehaviour and per- formance of the sands under operative conditions. The effect of particle size distribution on sintering, microstruc- ture, flowability, and permeability were presented. In all cases, the particle size varies from 0.1 to 1.5 mm corre- sponding to free flowing powders. One of the samples has higher permeability factor in comparison with others due to low particle size distribution. The other sample presents very good free opening due to its very good flowability and permeability factor.
参考文献
| [1] | Tomba A G;Cameruecci M A;Cavalieri A L.Ladle Filler Sand Evaluation[A].Orlando:Curran Associates Publishers,2005:161. |
| [2] | Alper A.High Temperature Oxides[M].New York and London:Academic Press,1970 |
| [3] | Mylene L S;Anibal O L, Maria.Moisture Influence on Per formance of Nozzle Filler for Continuous Casting of Steel[A].Curitiba:Brazil Association of Metallurgy and Material,2008:124. |
| [4] | Cathcart C R;Hole P J;Minion R L.Ladle Free Open and Choke Free Improvement at Stelco Hilton Works[A].Pittsburgh:Shrinkwrap Publisher,2000:361. |
| [5] | J.Cain .An Alternative Technique for Determining ANSI/CEMA Standard 550 Flowability Ratings for Granular Materials[J].Powder Handling & Processing,2002(3):218-220. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%