欢迎登录材料期刊网

材料期刊网

高级检索

结合某油田现场应用情况,利用高压釜、扫描电镜和X-射线衍射(XRD)等手段,对比研究了N80和GB-NSO-3Cr两种材料在模拟油田水环境中腐蚀行为.结果表明,温度对腐蚀速率影响较大,随着温度的增加,腐蚀速率呈增大趋势;温度高于60℃时,N80材料开始出现台地状局部腐蚀,而GB-N80-3Cr在所有测试温度下均未见局部腐蚀出现,且GB-N80-3Cr的腐蚀速率明显低于N80材料.

Corresponding to the practical operation condition of pipeline in oil fields,simulated water was prepared.Then corrosion performance of N80 and GB-N80-3Cr steel in the simulation water were exam-ined in an autoclave.The corroded samples were characterized by SEM and XRD.The results indicate that the temperature affects the corrosion rate,and the corrosion rate increases along with the increasing of temperature.N80 steel suffered from localized corrosion when the temperature was higher than 60℃,but GB-N80-3Cr did not at any testing temperatures.The corrosion rate of GB-N80-3Cr steel WaS much lower than that of N80 steel.

参考文献

[1] 方丙炎,韩恩厚,朱自勇,等.管线钢的应力腐蚀研究现状及损伤机理[J].材料导报,2001,15(12):1.
[2] 张学元,邸超,雷良才.二氧化碳腐蚀与控制[M].北京,化学工业出版社,1995.8.
[3] Heuer J K,Stubbins J F.An XPS characterization of FeCO_3 films from CO_2 corrosion[J].Corrosion Science,1999,41 (7):1231.
[4] Burke P A.Synopsis,Recent progress in the understanding ofCO_2 cerrosion[J].Corrosion,1985,31 (4):25.
[5] 马文海,裴晓含,高飞,等,N80钢在模拟深层气井水溶液中的CO_2腐蚀行为[J].中国腐蚀与防护学报,2007,27(1):8.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%