综述了国内外学者对等离子喷涂层磨损/接触疲劳失效行为研究的现状,指出单一地研究接触疲劳失效或摩擦磨损失效存在一定的局限性,滚动/滑动竞争性失效研究对工程实践具有持久性的指导作用,是未来等离子喷涂层磨损/接触疲劳失效行为研究的重要方向.
参考文献
| [1] | 徐滨士;朱绍华.表面工程的理论与技术[M].北京:国防工业出版社,2010 |
| [2] | ZHU S;XU B S;YAO J K .High Quality Ceramic Coating Sprayed by High Efficiency Hypersonic Plasma Spraying Gun[J].Materials Science Forum,2005,475-479(05):3981-3984. |
| [3] | 张燕,张行,刘朝辉,邓智平.热喷涂技术与热喷涂材料的发展现状[J].装备环境工程,2013(03):59-62. |
| [4] | 王海军.热喷涂实用技术[M].北京:国防工业出版社,2006 |
| [5] | 池来俊,樊自拴,肖旭东,吴旭,孙冬柏.热喷涂高温抗氧化耐磨损涂层的研究[J].表面技术,2009(02):37-41,88. |
| [6] | Wang, C.;Chen, J.;Fan, L.;Han, Z.;Wang, H..Fabrication and properties of supersonic plasma sprayed Al _2O _3 coating on porous Si _3N _4 substrate[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:725-730. |
| [7] | ZHANG Z Y;LU X C;LUO J B .Tribological Properties of Rare Earth Oxide Added Cr3C2-NiCr Coating[J].Applied Surface Science,2007,253:43774385. |
| [8] | 王韶云,李国禄,王海斗,刘金海,徐滨士,朴钟宇.重熔处理对NiCrBSi涂层接触疲劳性能的影响[J].材料热处理学报,2011(11):135-139. |
| [9] | ZHANGXC;XU BS;TU ST et al.Effect of Spraying Power on the Microstructure and Mechanical Properties of Supersonic Palsma-sprayed Ni-based Alloy Coatings[J].Applied Surface Science,2008,254:6318-6326. |
| [10] | ZHANG X C;XU B S;WU Y X et al.Porosity,Mechanical Properties,Residual Stresses of Supersonic Plasma-sprayed Ni-based Alloy Coating Prepared at Different Powder Feed Rates[J].Applied Surface Science,2008,254:3879-3889. |
| [11] | 邹群,水中和,徐昌盛,陈克勤,萧以德.表面处理技术提高混凝土内置钢筋耐久性的研究[J].装备环境工程,2012(04):19-22. |
| [12] | Stewart S;Ahmed R;Itsukaichi T .Rolling contact fatigue of post-treated WC-NiCrBSi thermal spray coatings[J].Surface & Coatings Technology,2005(2/3):171-189. |
| [13] | 王海军.热喷涂材料及应用[M].北京:国防工业出版社,2008 |
| [14] | PIAO Z Y;XU B S;WANG H D et al.Investigation of Fatigue Failure Prediction of Fe-Cr Alloy Coating under Rolling Contact Based on Acoustic Emission Technique[J].Applied Surface Science,2011,257:2581-2586. |
| [15] | HIROKAZU T;YASUTAKA A .Study of Titanium Nitride Deposition by Supersonic Plasma Spraying[J].VACUUM,2009,83:98-101. |
| [16] | Du LZ;Xu BS;Dong SY;Zhang WG;Zhang JM;Yang H;Wang HJ .Sliding wear behavior of the supersonic plasma sprayed WC-Co coating in oil containing sand[J].Surface & Coatings Technology,2008(15):3709-3714. |
| [17] | 赵晓琴,周惠娣,陈建敏.等离子喷涂纳米和常规喂料WC-Co涂层在干摩擦和水环境中的摩擦磨损性能研究[J].摩擦学学报,2006(03):208-213. |
| [18] | TIAN W;WANG Y;YANG Y .Fretting Wear Behavior of Conventional and Nanostructured Al2O3-13wt% TiO2 Coating Fabricated by Slasma Spray[J].WEAR,2008,265:1700-1707. |
| [19] | TIAN W;WANG Y;YANG Y .Three Body Abrasive Wear Characteristics of Plasma Sprayed Conventional and Nanostructured Al2O3-13% TiO2 Coating[J].Tribology International,2010,43:876-881. |
| [20] | Shunyan Tao;Zhijian Yin;Xiaming Zhou;Chuanxian Ding .Sliding wear characteristics of plasma-sprayed Al_2O_3 and Cr_2O_3 coatings against copper alloy under severe conditions[J].Tribology International,2010(1/2):69-75. |
| [21] | 李晓亮,阎殿然,何继宁,董艳春,李香芝,张建新.反应等离子喷涂TiN/AlN涂层在润滑状态下摩擦磨损性能的研究[J].热加工工艺,2006(11):52-54. |
| [22] | 叶辉,李强,魏振毅,赵小健.等离子喷涂Al2O3-13wt.%TiO2涂层在干摩擦条件下的磨损机制转变图[J].摩擦学学报,2009(03):246-250. |
| [23] | 安家财,杜三明,肖宏滨,张永振.等离子喷涂40%ZrO2-Al2O3-13%TiO2陶瓷涂层及其摩擦磨损性能研究[J].表面技术,2011(02):4-7. |
| [24] | LI X M;YANG Y Y;SHAO T M et al.Impact Wear Performances of Cr3C2-NiCr Coatings by Plasma and HVOF Spraying[J].WEAR,1997,202:208-214. |
| [25] | Peichl A.;Beck T.;Vohringer O. .Behaviour of an EB-PVD thermal barrier coating system under thermal-mechanical fatigue loading[J].Surface & Coatings Technology,2003(2/3):113-118. |
| [26] | 毕继鑫,孙宏飞,倪立勇,渠智彦.Fe/Cr涂层抗高温氧化性能研究[J].失效分析与预防,2007(03):12-15. |
| [27] | S. Stewart;R. Ahmed;T. Itsukaichi .Contact fatigue failure evaluation of post-treated WC-NiCrBSi functionally graded thermal spray coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2004(9/10):962-983. |
| [28] | 朴钟宇,徐滨士,王海斗,濮春欢.等离子喷涂铁基涂层的接触疲劳失效机理研究[J].材料工程,2009(11):69-73. |
| [29] | 安树春,程汉池,栗桌新,高晨.热喷涂涂层的重熔后处理工艺研究进展[J].表面技术,2009(02):73-77. |
| [30] | Y.F. Tan;P. Martin;C. Lescalier .Study on the ground surface quality of Cr_2O_3 coatings[J].Journal of Materials Processing Technology,2002(1/3):441-445. |
| [31] | D. J. Stephenson;J. Hedge;J. Corbett .Surface finishing of Ni-Cr-B-Si composite coatings by precision grinding[J].International Journal of Machine Tools & Manufacture: Design, research and application,2002(3):357-363. |
| [32] | KLEIN M;EIFLER D .Influences of the Manufacturing Processes on the Surface Integrity and the Resulting Fatigue Behavior of Quenched and Tempered SAE4140[J].Procedia Engineering,2010,2(01):2239-2247. |
| [33] | Zhongyu Piao;Binshi Xu;Haidou Wang;Chunhuan Pu .Influence of undercoating on rolling contact fatigue performance of Fe-based coating[J].Tribology International,2010(1/2):252-258. |
| [34] | STEWART S;AHMED R .Rolling Contact Fatigue of Surface Coating:A Review[J].WEAR,2002,253:1132-1144. |
| [35] | 宋亚南,徐滨士,王海斗,朴钟宇.喷涂层结合强度测量方法的研究现状[J].工程与试验,2011(04):1-8. |
| [36] | Masahiro Fujii;Jiabin Ma;Akira Yoshida;Sadato Shigemura;Kazumi Tani .Influence of coating thickness on rolling contact fatigue of alumina ceramics thermally sprayed on steel roller[J].Tribology International,2006(11):1447-1453. |
| [37] | PIAO Z Y;XU B S;WANG H D et al.Effects of Thickness and Elastic Modulus on Stress Condition of Fatigue-resistant Coating under Rolling Contact[J].Journal of Central South University of Technology(Natural Science),2010,17:899-905. |
| [38] | 朴钟宇,徐滨士,王海斗,濮春欢.涂层厚度对喷涂层疲劳磨损寿命的影响[J].摩擦学学报,2010(05):448-452. |
| [39] | NAKAJIMA A;MAWATARI T;YOSHIDA M et al.Effects of Coating Thickness and Slip Ratio on Durability of Thermally Sprayed WC Ceramic Coating in Rolling/Sliding Contact[J].WEAR,2000,241:166-173. |
| [40] | 邢闽芳.互换性与技术测量[M].北京:清华大学出版社,2007 |
| [41] | M. Hadfield;T. A. Stolarski .The effect of the test machine on the failure mode in lubricated rolling contact of silicon nitride[J].Tribology International,1995(6):377-382. |
| [42] | AHMED R;HADFIELD M .Wear of High Velocity Oxy-fuel (HVOF)-coated Cones in Rolling Contact[J].WEAR,1997,203:98-106. |
| [43] | Zhong-yu Piao;Bin-shi Xu;Hai-dou Wang;Dong-hui Wen .Influence of Surface Roughness on Rolling Contact Fatigue Behavior of Fe-Cr Alloy Coatings[J].Journal of Materials Engineering and Performance,2013(3):767-773. |
| [44] | X.C. Zhang;B.S. Xu;F.Z. Xuan;S.T. Tu;H.D. Wang;Y.X. Wu .Porosity And Effective Mechanical Properties Of Plasma-sprayed Ni-based Alloy Coatings[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2009(8):4362-4371. |
| [45] | X.C. Zhang;B.S. Xu;F.Z. Xuan .Statistical analyses of porosity variations in plasma-sprayed Ni-based coatings[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2009(1/2):501-508. |
| [46] | 王韶云,李国禄,王海斗,刘金海,徐滨士,朴钟宇.微缺陷对热喷涂涂层接触疲劳性能的影响[J].材料工程,2012(02):72-76. |
| [47] | 杨效田,王智平,路阳,李霞,周晶晶.高铝铜合金粗粉超音速等离子喷涂层的边界润滑摩擦特性[J].中国有色金属学报,2012(11):3100-3106. |
| [48] | 王海斗,张志强,李国禄,徐滨士,朴钟宇.等离子喷涂层接触疲劳失效模式及失效机理的研究[J].摩擦学学报,2012(03):251-257. |
| [49] | Piao Zhong-yu;Xu Bin-shi;Wang Hai-dou;Pu Chun-Huan .Investigation of rolling contact fatigue lives of Fe–Cr alloy coatings under different loading conditions[J].Surface & Coatings Technology,2010(9/10):1405-1411. |
| [50] | 朴钟宇 .面向再制造的等离子喷涂层接触疲劳失效机理及寿命评估[D].秦皇岛:燕山大学,2010. |
| [51] | 康嘉杰 .等离子喷涂层的竞争性失效行为和寿命预测[D].北京:中国地质大学(北京),2013. |
| [52] | A. Nakajima;T. Mawatari;M. Yoshida;K. Tani;A. Nakahira .Effects of coating thickness and slip ratio on durability of thermally sprayed WC cermet coating in rolling/sliding contact[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(2):166-173. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%