本文通过质子交换膜燃料电池单电池子模型、布气管子模型、流场子模型相互耦合,对电池堆传热传质过程加以数值模拟,得到单电池及电池堆的流场、温场、当地电流密度分布、过电位分布;给定平均电流密度下单电池及电池堆输出电压等参数;并比较了平均电流密度、布气管尺寸对电池输出电压、堆内反应物分配的影响;在此基础上,对整个PEMFC发电系统进行流程模拟和参数分析,得到平均电流密度、重整器S/C等主要参数对系统性能影响.
参考文献
| [1] | J C Amphlett.Simulation and System Analysis of An Ethanol Fuel Processor/PEM Fuel Cell Power Plant[M].33rd IECEC Conference Cororado,1998 |
| [2] | J C Amphlett.System Analysis of an Integrated Methanol Steam Reformer/PEM Fuel Cell Power Generating System[M].27rd IECEC Conference Cororado,1992 |
| [3] | Andrew L Dicks.Hydrogen Generation from Natural Gas for the Fuel Cell Systems of Tomorrow[J].Journal of Power Sources,1996:61. |
| [4] | T V Nguyen .A Water and Heat Management Model for Proton Exchange Membrane Fuel Cells[J].Journal of the Electrochemical Society,1993,140(08):2178. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%