Through the differentiating and integrating process, a mathematical model for tempering time effect on quenched steel was derived based on the attribute of state function and the general equation of Hollomon parameter, which correlates the tempering hardness with the tempering time at different tempering temperature. Using the established model, thelinear relationship between the tempering hardness and the tempering time in logarithm was proved theoretically, and the tempering hardness for various tempering time was reduced to the measurement and calculation of a hardness experiment tempered for 1 h at different tempering temperatures. Moreover, the hardness of steel 42CrMo and T8Mn tempered for various times at 200～600℃ was calculated using this method. The predicted results are in good agreement with those of the available experiments.
参考文献
| [1] | D L Loveless;R L Cook;V I Rudnev .[J].Metal Science and Heat Treatment,2001,43(05):215. |
| [2] | T Furuhara;K Kobayashi;T Maki .[J].ISIJ International,2004,44(11):1937. |
| [3] | J H Houomon;L D Jaffe .[J].Transactions AIME,1945,162:223. |
| [4] | K E Thelning.Steel and Its Heat Treatment[M].Butterworths London,1984:288-292. |
| [5] | S Mario;K George .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1997,28(02):377. |
| [6] | Congsheng GUO .[J].Acta Metallurgica Sinica(English edition),1999,35(08):865. |
| [7] | Zhanping ZHANG;Yuehong QI;D Delagnes;G Bernhart .[J].Trans Mater Heat Treatment,2004,25(01):41. |
| [8] | N. Saunders;Z. Guo;X. Li .Using JMatPro to Model Materials Properties and Behavior[J].JOM,2003(12):60-65. |
| [9] | B L Ferguson;A M Freborg;G Petrus;M L Callabresi.[J].Gear Technology,2002(11):20. |
| [10] | V. C. Prantil;M. L. Callabresi;J. F. Lathrop .Simulating Distortion and Residual Stresses in Carburized Thin Strips[J].Journal of engineering materials and technology,2003(2):116-124. |
| [11] | T Inoue;K Arimoto .[J].Industrial Heating,1995,62(04):41. |
| [12] | W Johnson;R Mehl .[J].Transactions AIME,1939,135:416. |
| [13] | Z. Zhang;D. Delagnes;G. Bernhart .Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):222-230. |
| [14] | T Filetin;I Zmak.Proc the 10th Int on Danube Adria Association for Automation & Manufacturing Symposium[C].Vienna University of Technology Vienna,1999:155. |
| [15] | T Filetin;D Majetic;I Zmak.Proc of 2nd Int Conf on Industrial Tools-ICIT'99[C].Rog Slatina,1999:424. |
| [16] | Chaowen ZHAO.[J].Heat Treat Metal,1996(11):21. |
| [17] | Zhishan LIU.[J].Trans Mater Heat Treatment,1990(11):3. |
| [18] | Zhizhong HU.Steel and Its Heat Treatment Curves Handbook[M].北京:国防工业出版社,1986:79. |
| [19] | M G Floyd.An Introduction to Materials Science and Engineering[M].New York:John Wiley & Sons,1985:217. |
| [20] | Shihong ZHONG.[J].Heat Treat Metal,1987(11):8. |
| [21] | Chunfeng HUANG.[J].Heat Treat Metal,1994(07):46. |
| [22] | Xueqian WANG;Zhijuan Chen.[J].Journal Sichuan Inst Technol,1989(08):194. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%